watch Archives * flexco.com

5 Easy Steps to Remove the Back of a Watch

Taking the back off a watch is a simple process that can be done at home with a few simple tools. Whether you need to replace a battery, repair a movement, or simply clean the case, removing the back is the first step. Depending on the type of watch you have, there are several different ways to remove the back. In this article, we will discuss the three most common methods: using a watch back remover, using a knife, and using a coin.

No matter which method you choose, it is important to take precautions to avoid damaging your watch. First, make sure that you have a clean, well-lit workspace. Second, use a soft cloth or pad to protect the watch from scratches. Finally, be patient and take your time. Removing the back of a watch can be a delicate process, so it is important to avoid using excessive force.

Once you have removed the back of your watch, you can access the movement and make any necessary repairs or adjustments. When you are finished, be sure to replace the back securely and tighten the screws or bolts. If you are not comfortable removing the back of your watch yourself, you can always take it to a jeweler or watch repair shop for assistance.

Safety Precautions

Before embarking on the task of removing the back of a watch, it is paramount to prioritize safety measures to prevent any potential damage or injury.

Essential Precautions:

Secure Work Surface: Choose a stable and well-lit workspace that minimizes the risk of accidental slips or falls.
Proper Tools: Use appropriate watchmaker’s tools, such as a case opener or a specialized watch back remover, to avoid scratches or damage to the watch.
Anti-Static Measures: Handle the watch with anti-static gloves or discharge any static electricity present on your body to prevent electrostatic damage to sensitive components.
Protective Cover: Place soft cloths or a watch repair mat underneath the watch to prevent scratches or damage to the case or band.
Patience and Care: Approach the process with patience and meticulous care to avoid any unnecessary force or damage.

Specific Considerations:

Watch Type	Precautions
Screw-On Back	Use a case opener or back remover that fits the specific notch type. Do not apply excessive force to avoid stripping the threads.
Snap-On Back	Use a specialized snap-on case opener tool. Avoid using a knife or sharp object that could damage the case or watch.
Press-Fit Back	Use a specially designed press that applies even pressure to avoid bending or breaking the case.

Identifying the Caseback Type

The first step in removing the back of a watch is to identify the type of caseback it has. There are two main types of casebacks: screw-back and press-fit.

Screw-back casebacks are the most common type. They are held in place by screws that are located around the perimeter of the caseback. To remove a screw-back caseback, you will need a special tool called a caseback wrench. Caseback wrenches are available in various sizes, so it is important to choose the correct size for your watch.

Press-fit casebacks are less common than screw-back casebacks. They are held in place by being pressed into the case. To remove a press-fit caseback, you will need a special tool called a caseback press. Caseback presses are also available in various sizes, so it is important to choose the correct size for your watch.

Here is a table that summarizes the different types of casebacks and the tools you will need to remove them:

Caseback Type	Tool Needed
Screw-back	Caseback wrench
Press-fit	Caseback press

Removing a Screw-Back Caseback

Screw-back casebacks are among the most common types of watch casebacks, and they’re typically found on higher-end timepieces. They offer a robust and secure seal, protecting the delicate inner workings of the watch. If you need to access the movement or replace a battery, removing a screw-back caseback is a relatively simple process with the right tools and a steady hand.

Tools You’ll Need

Caseback opener tool
Soft cloth or damp towel
Watchmaker’s loupe (optional)

Step 1: Prepare the Watch

Place the watch on a soft cloth or damp towel to protect it from scratches.
Use a watchmaker’s loupe to inspect the caseback and identify the notches where the caseback opener tool is inserted.

Step 2: Insert the Caseback Opener Tool

Choose the appropriate blade for your watch’s caseback notches.
Insert the blade into one of the notches and ensure it’s fully engaged.

Step 3: Gently Pry Open the Caseback

Carefully pry against the caseback with a gentle twisting motion.
Apply even pressure and gradually work your way around the caseback, prying it open evenly.
Be patient and take your time to avoid damaging the case or movement.
Avoid using excessive force, as this can damage the caseback or strip the threads.
Once the caseback is loose, gently lift it off the watch.

Tip: If the caseback is particularly tight, you can apply a small amount of penetrating oil to the threads before prying it open.

Removing a Snap-On Caseback

1. Gather tools

* Ball point pen, pocket knife, or credit card

2. Pry the caseback off

Now, insert the tip of your tool between the caseback and the watch body. Be careful not to scratch either surface. Gently pry the caseback away from the watch body, working your way around the circumference of the watch. You should feel the caseback loosen and eventually pop off.

3. Remove the caseback

Once the caseback is loose, you can remove it completely. Be careful not to lose the gasket that is located between the caseback and the watch body. This gasket helps to keep the watch waterproof.

4. Detailed Instructions for Difficult Cases

If you are having trouble removing the caseback, you can try the following:

Method	Step-by-Step Instructions
Rubber band	Wrap a rubber band around the perimeter of the caseback. Grip the ends of the rubber band with your hands and pull in opposite directions. The friction between the rubber band and the caseback should help it to pop off.
Hairdryer	Heat the caseback with a hairdryer for a few minutes. The heat will cause the metal to expand, making it easier to pry off.
Caseback opener	If you have a caseback opener, you can use it to remove the caseback. Place the caseback opener on the caseback and turn the key until the caseback pops off.

Removing a Bayonet-Style Caseback

A bayonet-style caseback requires a special tool called a bayonet caseback opener. If you don’t have one, you can purchase one online or at a watch repair shop.

Place the watch in the caseback opener, making sure that the blade of the opener is aligned with the notches in the caseback.
Gently turn the opener until the caseback is loose. Do not overtighten, as this can damage the caseback or the watch.
Once the caseback is loose, you can remove it by hand.
Place the new caseback on the watch, making sure that it is aligned correctly.
Use the caseback opener to tighten the caseback. Again, do not overtighten.

Tips for Removing a Bayonet-Style Caseback

Here are some tips for removing a bayonet-style caseback:

Tip	Description
Use a soft cloth or piece of leather to protect the watch from scratches.	This will help to prevent damage to the watch’s finish.
Be patient and take your time.	Rushing the process can lead to mistakes.
If you are having trouble removing the caseback, you can try using a hair dryer to heat it up.	This will make the caseback easier to remove.

Removing a Pressure-Fitted Caseback

1. Gather Required Tools:

* Watch case opener or pocket knife with a thin, sharp blade
* Soft cloth or rubber pad
* Gloves (optional)

2. Protect the Watch:

* Place the watch face down on a soft cloth or rubber pad. This protects the crystal and case from scratches.

3. Insert Case Opener Blade:

* Hold the watch steady with one hand.
* Insert the thin blade of the case opener or knife into the small gap between the caseback and the case.

4. Apply Pressure and Wiggle:

* Apply gentle pressure to the blade while simultaneously wiggling it back and forth.
* This should create a small opening that allows the caseback to lift slightly.

5. Remove the Caseback:

* Once the caseback is lifted, carefully use your fingers or a rubber caseback remover to pry it off.
* Be cautious not to scratch the case or damage the movement.

6. Cleaning and Inspection:

* Clean the caseback and gasket with a soft cloth and rubbing alcohol.
* Inspect the gasket for damage or wear and replace it if necessary.
* Lubricate the gasket lightly with a small amount of silicone grease.

Gasket Maintenance:

Gasket Type	Maintenance
Rubber	Clean with soap and water, lubricate with silicone grease
Teflon	Do not clean or lubricate
Cork	Replace regularly, do not lubricate

Avoiding Common Mistakes

When removing the back of a watch, several common mistakes can lead to damage or frustration. Here are some critical pitfalls to avoid:

1. Using the wrong tool

Opening a watch back typically requires a specialized tool such as a case opener or watchmaker’s knife. Using pliers or other household tools can damage the case or crystal.

2. Overtightening

When replacing the watch back, avoid overtightening it. Excessive force can strip the threads or damage the gaskets, leading to water resistance issues.

3. Forcing the back open

If the back is resistant, do not force it open. Use gentle pressure and try different positions until it releases. Excessive force can damage the case.

4. Damaging the gasket

The gasket between the watch case and back creates a watertight seal. Avoid damaging it when removing the back. Use a plastic tool to gently pry it loose.

5. Losing small parts

Some watches have small parts, such as springs or spacers, that can easily fall out when the back is removed. Keep track of these components and handle them carefully.

6. Touching the movement

Once the back is open, avoid touching the movement with your fingers or tools. This can damage delicate components or leave behind fingerprints.

7. Watch back shapes and methods for removing them

Snap-on back: These backs simply snap into place and can be removed by gently prying them off with a case opener.
Screw-down back: These backs have small notches around the circumference that require a special tool to unscrew.
Bayonet back: These backs are held in place by a spring and are opened by turning them counterclockwise while applying gentle pressure.
Press-fit back: These backs are pressed into place and require a specific tool to remove them.
Display back: These backs are transparent and are typically screwed into place with tiny screws.
Mineral glass back: These backs are made of mineral glass and may be held in place by a small screw or friction.
Screw-in back: These backs have a central screw that must be removed to detach the back.
Pop-off back: These backs are held in place by a retaining ring that can be popped off using a special tool.

Utilizing Specialized Tools

When standard methods fail, specialized tools may be necessary to safely and effectively remove the back of a watch. These tools include:

Case Opener

A case opener is a specialized tool designed to grip the watch case and apply torque to open it. It typically consists of two jaws that fit around the case, allowing for precise and controlled opening.

Case Knife

A case knife is a thin, sharp blade used to pry open watch cases. It is inserted into a small gap between the case and the back, allowing the user to gently lever the back off.

Watchmaker’s Pliers

Watchmaker’s pliers are small, precision pliers used for gripping and manipulating watch components. They can be used to grip the case back and apply pressure to open it.

Watchmaker’s Screwdriver

Some watch backs are held in place by small screws. A watchmaker’s screwdriver is a specialized screwdriver with a thin, precision tip designed to fit the screws precisely.

Watch Press

A watch press is a device used to apply pressure to the watch back, forcing it open. It consists of two jaws that grip the case and a press mechanism that applies controlled pressure.

Case Back Remover

A case back remover is a tool specifically designed to open watch cases with threaded backs. It consists of a mandrel that fits into the threads and a handle that is used to apply torque.

Watch Back Opener

A watch back opener is a tool that fits over the entire watch case and applies pressure to the case back, forcing it open. It is typically used for cases that are difficult to open with other methods.

Reassembling the Watch

Once you have successfully replaced the battery or performed any necessary repairs, it is time to reassemble the watch. Follow these steps carefully to ensure that the watch is properly sealed and functioning correctly.

1. Clean the Case Back

Before reattaching the case back, clean it thoroughly with a soft, lint-free cloth to remove any dirt or debris.

2. Apply a Thin Layer of Grease

Apply a thin layer of grease to the O-ring or gasket on the case back. This will help to create a watertight seal.

3. Replace the Case Back

Carefully place the case back over the watch case, aligning the notches or threads.

4. Screw On the Case Back

If your watch has a screw-on case back, use a watchmaker’s screwdriver to tighten the screws evenly. Do not overtighten.

5. Press On the Case Back

If your watch has a press-on case back, use a watch press or your fingers to apply even pressure until the case back snaps into place.

6. Wipe Off Excess Grease

Use a clean cloth to wipe off any excess grease that may have seeped out from the case back.

7. Check the Water Resistance

If your watch is water-resistant, test it by submerging it in a glass of water for a short period of time. Check for any leaks or water damage.

8. Set the Time and Date

Use the crown to set the time and date to the correct settings.

9. Inspect the Watch for Any Issues

After reassembling the watch, inspect it carefully for any signs of damage or malfunction. Check that the hands are moving smoothly, the buttons are working correctly, and the watch is keeping accurate time. If you notice any problems, do not hesitate to seek professional assistance from a qualified watchmaker.

Troubleshooting Reassembly Issues
If the watch is not keeping time accurately, check the battery and ensure that it is properly installed. If the watch is leaking water, check the O-ring or gasket and replace it if necessary. If the buttons are not working correctly, inspect the contacts and ensure that they are clean and making good contact. If the watch is not starting, check the battery and ensure that it is making good contact with the terminals. If you encounter any other issues, consult with a qualified watchmaker for assistance.

Troubleshooting Reassembly Issues

If the watch is not keeping time accurately, check the battery and ensure that it is properly installed.
If the watch is leaking water, check the O-ring or gasket and replace it if necessary.
If the buttons are not working correctly, inspect the contacts and ensure that they are clean and making good contact.
If the watch is not starting, check the battery and ensure that it is making good contact with the terminals.
If you encounter any other issues, consult with a qualified watchmaker for assistance.

Maintaining Your Watch

Watches are delicate instruments that require regular maintenance to keep them functioning properly. Removing the back of a watch is often necessary for cleaning, repairs, or battery replacement. Here are the steps on how to remove the back of a watch:

1. Gather the Necessary Tools

You will need a watchmaker’s knife or a small, flathead screwdriver and a soft cloth.

2. Protect the Watch

Place the watch on the soft cloth to protect it from scratches.

3. Insert the Knife or Screwdriver

Carefully insert the blade of the watchmaker’s knife or the tip of the screwdriver into the notch on the back of the watch.

4. Pry Open the Back

Gently pry open the back of the watch by applying pressure with the knife or screwdriver.

5. Remove the Back

Once the back is loose, carefully remove it and set it aside.

6. Inspect the Gasket

Inspect the gasket that seals the back of the watch. If it is damaged or worn, replace it.

7. Clean the Inside of the Watch

Use a soft cloth or cotton swab to clean the inside of the watch, removing any dust, dirt, or moisture.

8. Reinstall the Back

Align the gasket with the groove on the back of the watch and carefully press the back into place.

9. Tighten the Back

Use the watchmaker’s knife or screwdriver to tighten the back of the watch by gently pressing around the circumference.

10. Wipe Down the Watch

Use a soft cloth to wipe down the watch and remove any fingerprints or smudges. Check for any water resistance by submerging the watch in a glass of water for a few minutes. If no water enters the watch, it is water-resistant. If water does enter the watch, you may need to replace the gasket or have the watch repaired by a professional.


Tool List:
Watchmaker’s knife or flathead screwdriver Soft cloth

How To Remove The Back Of A Watch

To remove the back of a watch, you will need a few tools:

A watchmaker’s knife or a small, sharp knife
A soft cloth
A pair of tweezers

Instructions:

Place the watch face down on the soft cloth.
Using the watchmaker’s knife, carefully pry open the back of the watch. Be careful not to scratch the watch case.
Once the back is open, use the tweezers to remove the battery.
Replace the battery with a new one and close the back of the watch.

**Tips:**

If the back of the watch is difficult to open, you can try using a rubber band. Place the rubber band around the watch case and twist it until the back opens.
Be careful not to overtighten the back of the watch when you close it. This can damage the watch case.

10 Quick and Easy Ways to Remove a Watch Back

The intricate mechanics of a watch often conceal a hidden world of precision engineering. One of the most delicate and time-consuming tasks a watchmaker undertakes is removing the back of a watch, a process that requires both finesse and a deep understanding of the watch’s construction. Whether it’s to replace a battery, clean the movement, or simply admire the intricate workings beneath, learning how to take the back off a watch can be an invaluable skill for any watch enthusiast.

The back of a watch is typically secured to the case using a variety of methods, from simple pressure-fitted backs to complex screw-down case backs. Before attempting to remove the back, it’s essential to identify the type of back you’re dealing with. Pressure-fitted backs can usually be pried off using a specialized watch case opener, while screw-down case backs require a specific tool or key to loosen the screws. It’s important to note that applying excessive force or using the wrong tools can damage the watch, so caution is always advised.

Once the back has been removed, you’ll gain access to the watch’s movement. The movement is the heart of the watch, containing the intricate gears and springs that power its operation. It’s important to handle the movement with care, as it’s easily damaged. If you’re not comfortable working on the movement yourself, it’s best to entrust the task to a qualified watchmaker. However, simply removing the back can provide valuable insights into the watch’s construction and offer a glimpse into the fascinating world of horology.

Creating a DIY Tool from a Spoon

If you don’t have a dedicated caseback opener, you can create a makeshift tool from a spoon. Here’s how:

1. Select a sturdy spoon: Choose a metal spoon that’s thick and slightly curved, such as a soup spoon or serving spoon.

2. Flatten the end: Using pliers or a hammer, gently flatten the rounded end of the spoon to create a flat surface.

3. Sharpen the edge: Use a file or sandpaper to sharpen one edge of the flattened end to create a thin, serrated edge.

4. Bend the handle: Bend the handle of the spoon inward slightly, forming an angle between the flattened end and the handle.

5. Determine the appropriate size: Choose a spoon that has a flattened end roughly the same size as the caseback on your watch. This will ensure a proper fit and prevent damage to the watch.

Spoon Size	Suitable Caseback Diameter
Soup spoon	35-45mm
Serving spoon	45-55mm

Note: If your caseback is larger than the largest size spoon available, you may need to use multiple spoons to create a custom tool.

Vacuum Device Assistance

If you don’t have access to a watch press, you can use a vacuum device to remove the back of a watch. This method is less precise than using a press, but it can be effective if done carefully.

To use a vacuum device, you will need:

A vacuum cleaner with a hose attachment
A rubber suction cup that is slightly larger than the watch back

To remove the back of the watch using a vacuum device:

Place the rubber suction cup over the watch back.
Attach the vacuum cleaner hose to the suction cup.
Turn on the vacuum cleaner.
Gently pull on the suction cup to break the seal between the watch back and the case.
Once the seal is broken, the watch back should come off easily.

Here are some additional tips for using a vacuum device to remove the back of a watch:

Tip	Description
Use a soft rubber suction cup.	This will help to prevent scratching the watch back.
Be careful not to pull too hard on the suction cup.	This could damage the watch.
If you are having trouble removing the watch back, try using a lubricant such as WD-40.	This will help to break the seal between the watch back and the case.

Specialized Tools for the Task

For a precise and efficient back removal, specialized tools are indispensable. Here are some crucial instruments:

Case Back Knife: Resembles a small knife with a curved blade to gently pry open case backs.
Watchmaker Hammer: A miniature hammer used to tap gently on the watch’s back, creating vibrations to loosen the back.
Case Back Opener: A tool specifically designed to remove screw-on case backs.
Rubber Bullet: A small rubber ball used to provide grip and protection when tapping the watch’s back.
Watch Case Holder: A device that secures the watch in place, allowing you to work on it without it slipping.
Crystal Press: Used to gently reattach the crystal or watch glass to the case.
Watch Winder: A tool that rotates the watch to keep it wound while the back is off.
Lens Blower: A small bulb used to blow away any dust or debris from the case or movement.
Dust Cover Remover: A tool with multiple prongs used to pry off the dust cover that protects the movement.

Additional Tips

When selecting tools, consider the material and type of watch you’re working on. Using the right tools for the job will prevent damage and ensure a successful back removal.

Tool	Usage
Case Back Knife	Prying open case backs with a precision cut
Watchmaker Hammer	Creating gentle vibrations to loosen the back
Case Back Opener	Screwing off or untightening screw-on case backs

How To Take The Back Off A Watch

There are a few different ways to take the back off of a watch, depending on the type of watch you have. For most watches, you will need a special tool called a watch back remover. This tool is available at most hardware stores or online. You can also use a small screwdriver or a coin, but be careful not to damage the watch.

To remove the back of a watch with a watch back remover, follow these steps:

Place the watch on a flat surface with the back facing up.
Align the watch back remover with the notch on the back of the watch.
Twist the watch back remover clockwise until the back of the watch pops off.

If you don’t have a watch back remover, you can use a small screwdriver or a coin to remove the back of the watch. To do this, follow these steps:

Place the watch on a flat surface with the back facing up.
Insert the screwdriver or coin into the notch on the back of the watch.
Gently pry the back of the watch off.

Be careful not to damage the watch when removing the back. If you are having trouble removing the back, it is best to take the watch to a jeweler or watch repair shop.

5 Easy Steps to Set Time on Armitron Pro Sport Watch

The Armitron Pro Sport Watch is a feature-packed timepiece that offers a wide range of functions, including a stopwatch, countdown timer, and multiple alarms. One of the most important features of any watch is its ability to keep accurate time, and the Armitron Pro Sport Watch is no exception. Setting the time on this watch is a simple process that can be completed in just a few steps.

First, locate the two buttons on the right side of the watch. The upper button is the “Mode” button, and the lower button is the “Adjust” button. To enter time-setting mode, press and hold the “Mode” button for about three seconds. The display will show the current time, and the seconds digits will start flashing. Use the “Adjust” button to change the seconds digits, then press the “Mode” button to move to the minutes digits.

Repeat this process to set the hours, month, and day. Once the time is set correctly, press and hold the “Mode” button again to exit time-setting mode. The time will now be displayed correctly on the watch face. The Armitron Pro Sport Watch is a versatile and durable watch that is perfect for a variety of activities. With its easy-to-use time-setting feature, you can always be sure that you are on time for your appointments and commitments.

Finding the Time Setting Button

The Armitron Pro Sport Watch has a distinctive design with various buttons located around its casing. To identify the time setting button, examine the watch’s features closely and follow these steps:

1. **Locate the Buttons:** Inspect the edges of the watch for small, raised buttons. The watch typically has two or three buttons, depending on the model.

2. **Press and Release:** Gently press each button once or twice to observe its function. The time setting button is usually labeled with an icon representing a clock or the letter “T.”

If there is no visible label, refer to the watch’s user manual or online resources for specific button functions.

3. **Determine the Time Setting Button:** Once you have identified the button that displays the time, press and hold it for a few seconds until the time starts flashing or a “SET” prompt appears on the display. This indicates that you have found the time setting button.

Button Location	Button Function
Top Left	Time Setting Button
Bottom Right	Mode Button
Bottom Left	Start/Stop Button

Entering Set Mode

To enter set mode on your Armitron Pro Sport Watch, begin by pressing and holding the lower right button. Continue holding the button until the hour digits start flashing on the display. This indicates that you have successfully entered set mode.

Setting the Time

Once you have entered set mode, use the upper right and lower right buttons to adjust the hour and minute digits. The upper right button increments the digits, while the lower right button decrements them. To toggle between adjusting the hours and minutes, press the lower left button.

When the time is set correctly, press and hold the upper right button until the time starts flashing again. This will indicate that the time has been saved and you can exit set mode. To exit set mode, simply release the button.

Button	Function
Upper right	Increment digits
Lower right	Decrement digits
Lower left	Toggle between hours and minutes

Adjusting the Hour

To adjust the hour on your Armitron Pro Sport watch, follow these steps:

1. Pull out the crown to the first position (one click).

2. Turn the crown clockwise to move the hour hand forward or counterclockwise to move it backward.

3. Once you have reached the desired hour, carefully push the crown back into its original position and ensure it is fully seated to prevent water damage.

Note:

For accurate timekeeping, it is recommended to adjust the watch by setting the hour hand first, then the minute hand, and finally the second hand (if applicable). This sequence helps to minimize any potential error in synchronization between the hands.

Here is a table summarizing the steps for adjusting the hour on your Armitron Pro Sport watch:

Step	Action
1	Pull out the crown to the first position.
2	Turn the crown clockwise to move the hour hand forward or counterclockwise to move it backward.
3	Push the crown back into its original position.

Setting the Minutes

To set the minutes, press and hold the “Mode” button for three seconds to enter the time-setting mode. The minutes will blink on the display. Use the “Start/Stop” button to increase the minutes by one, or the “Split/Reset” button to decrease the minutes by one.

Once you have set the minutes, press the “Mode” button to confirm your selection and exit the time-setting mode.

Button	Function
Mode	Enter/exit time-setting mode
Start/Stop	Increase minutes by one
Split/Reset	Decrease minutes by one

Setting the Time

To set the time on your Armitron Pro Sport watch, follow these steps:

Pull out the crown to the second click.
Turn the crown clockwise to set the hour hand.
Turn the crown counterclockwise to set the minute hand.
Press the crown back in to the first click.
Turn the crown clockwise to set the seconds hand.

Confirming the Time

To confirm the time, follow these steps:

Pull out the crown to the first click.
Turn the crown clockwise to set the hour hand.
Turn the crown counterclockwise to set the minute hand.
Press the crown back in.
Observe the time.

If the time is not correct, repeat steps 1-4.

Hour Hand	Minute Hand	Seconds Hand
Points to the hour	Points to the minute	Sweeps around the dial once per second

Note: When setting the time, it is important to note that the date will change automatically at midnight. However, if you need to manually change the date, pull out the crown to the first click and turn it counterclockwise.

Setting the Date

To set the date on your Armitron Pro Sport watch, follow these steps:

Press and hold the “Mode” button until the date display starts flashing.
Use the “Forward” and “Back” buttons to adjust the month.
Press the “Mode” button to confirm the month.
Use the “Forward” and “Back” buttons to adjust the day.
Press the “Mode” button to confirm the day.
Use the “Forward” and “Back” buttons to adjust the year.
Press the “Mode” button to confirm the year.
Press the “Start/Stop” button to exit the date setting mode.

Additional Notes

The date format can be set to either MM/DD/YY or DD/MM/YY.

To change the date format, press and hold the “Mode” button until the date display starts flashing. Then, press the “Forward” button to toggle between the two formats.

Troubleshooting

If you are having trouble setting the date on your Armitron Pro Sport watch, try the following:

Make sure that the watch is in the correct timekeeping mode.
Make sure that the battery is not low.
Try resetting the watch by pressing the “Reset” button.

Confirming the Date

1. Press and hold the “Mode” button for about three seconds. This will take you to the “Date” mode.

2. Use the “+” and “-” buttons to adjust the year.

3. Press the “Mode” button again to move to the “Month” mode.

4. Use the “+” and “-” buttons to adjust the month.

5. Press the “Mode” button again to move to the “Day” mode.

6. Use the “+” and “-” buttons to adjust the day.

7. Once you have adjusted the date, press and hold the “Mode” button for about three seconds to save the changes and exit the “Date” mode.

For Armitron Pro Sport watches with a digital display:

Setting the Alarm

To set the alarm, first press the “Mode” button until you reach the alarm setting mode. You will see the alarm icon on the display. Then, use the “+” and “-” buttons to set the hour and minute for the alarm.

Once you have set the time, press the “Mode” button again to save the settings. The alarm will now be set and will sound at the time you have specified.

Here is a more detailed explanation of the steps involved in setting the alarm:

1. Press the “Mode” button until you reach the alarm setting mode.

The alarm setting mode is indicated by the alarm icon on the display.

2. Use the “+” and “-” buttons to set the hour for the alarm.

Press the “+” button to increase the hour, and the “-” button to decrease the hour.

3. Press the “Mode” button to move to the minute setting.

4. Use the “+” and “-” buttons to set the minute for the alarm.

Press the “+” button to increase the minute, and the “-” button to decrease the minute.

5. Press the “Mode” button again to save the settings.

The alarm will now be set and will sound at the time you have specified.

6. To turn the alarm on or off, press the “Alarm On/Off” button.

When the alarm is on, the alarm icon will be displayed on the screen. When the alarm is off, the alarm icon will not be displayed.

7. To change the alarm settings, repeat the steps above.

8. The Armitron Pro Sport watch can store up to five alarms.

To set multiple alarms, simply repeat the steps above for each alarm. The watch will remember the settings for each alarm, and will sound each alarm at the time you have specified.

Here is a table summarizing the steps involved in setting the alarm on the Armitron Pro Sport watch:

Button	Function
“Adjust”	Press and hold to enter the date and time setting mode. Press to toggle between date and time settings. Press and hold to exit the setting mode.
“Mode”	Press to cycle through the date and time settings (year, month, day, hour, minute, second).
“+”	Press to increase the value of the selected setting.
“-“	Press to decrease the value of the selected setting.

Step	Action
1	Press the “Mode” button until you reach the alarm setting mode.
2	Use the “+” and “-” buttons to set the hour for the alarm.
3	Press the “Mode” button to move to the minute setting.
4	Use the “+” and “-” buttons to set the minute for the alarm.
5	Press the “Mode” button again to save the settings.
6	To turn the alarm on or off, press the “Alarm On/Off” button.

Confirming the Alarm

Once you have set the alarm, press the “SET” button once to confirm. The display will flash, and the alarm icon will appear in the display. To confirm the alarm settings, press the “SET” button again. The display will stop flashing, and the alarm will be set.

9. Setting the Alarm Duration

After setting the alarm time, you can set the duration of the alarm. The default alarm duration is 10 minutes. To change the duration, press the “MODE” button twice to enter alarm mode. Then, press the “SET” button to select the “DURATION” option. Use the “+” and “-” buttons to adjust the alarm duration. The duration can be set between 1 and 60 minutes.

Alarm Duration	Hours:Minutes
1	00:01
5	00:05
10	00:10 (default)
30	00:30
60	01:00

Time Setting Procedure

1. Press and hold Mode button for 3 seconds to access the Time Setting mode.
2. Use the Start/Stop and Split/Reset buttons to adjust the hour.
3. Press the Mode button to confirm the hour setting and proceed to the minute setting.
4. Use the Start/Stop and Split/Reset buttons to adjust the minutes.
5. Press the Mode button to confirm the minute setting and proceed to the second setting.
6. Use the Start/Stop and Split/Reset buttons to adjust the seconds.
7. Press the Mode button to confirm the second setting and proceed to the date setting.
8. Use the Start/Stop and Split/Reset buttons to adjust the month.
9. Press the Mode button to confirm the month setting and proceed to the day setting.
10. Use the Start/Stop and Split/Reset buttons to adjust the day.

Exiting Set Mode

1. Press the Mode button once to exit the Set Mode and return to the Timekeeping mode.
2. To enter the Set Mode again, press and hold the Mode button for 3 seconds.

Function	Button
Adjust Hour	Start/Stop or Split/Reset
Confirm Hour and Proceed to Minutes	Mode
Adjust Minutes	Start/Stop or Split/Reset
Confirm Minutes and Proceed to Seconds	Mode
Adjust Seconds	Start/Stop or Split/Reset
Confirm Seconds and Proceed to Date	Mode
Adjust Month	Start/Stop or Split/Reset
Confirm Month and Proceed to Day	Mode
Adjust Day	Start/Stop or Split/Reset
Exit Set Mode	Mode

How To Set Time On Armitron Pro Sport Watch

To set the time on your Armitron Pro Sport Watch, just follow these simple steps:

Pull out the crown. The crown is the small knob on the side of the watch. Pull it out to the first click.
Turn the crown to set the hour. Turn the crown clockwise to move the hour hand forward, and counterclockwise to move it backward.
Push in the crown. Once you have set the hour, push the crown back in to the first click.
Turn the crown to set the minutes. Turn the crown clockwise to move the minute hand forward, and counterclockwise to move it backward.
Push in the crown. Once you have set the minutes, push the crown back in all the way.

Your watch is now set to the correct time.

How to Open a Watch in 5 Simple Steps

As an avid watch enthusiast, you may often encounter situations where you need to open your prized timepiece for maintenance, repair, or even just a simple battery replacement. While some watches may feature user-friendly designs that allow for easy access, others require a more delicate and technical approach. In this comprehensive guide, we will delve into the intricacies of watch opening, providing step-by-step instructions and expert tips to help you tackle this task with confidence and precision.

Before embarking on this endeavor, it is crucial to assess the type of watch you possess. Different watch models employ varying mechanisms for securing the case, ranging from simple snap-on backs to intricate screw-down designs. Identifying the type of caseback closure will determine the appropriate tools and techniques required for opening.

Next, gather the necessary tools for the job. A basic watch repair kit typically includes essential items such as a case opener, tweezers, and a set of screwdrivers. Depending on the specific watch model, you may also require specialized tools like a spring bar tool or a crystal press. It is advisable to consult the watch’s manufacturer or an experienced watchmaker to ensure you have the correct tools for your particular timepiece.

Dismantling the Watch Band

Types of Watch Bands and Clasps

Watch Band Type	Clasp Type
Metal Bracelets	Fold-over Clasp Butterfly Clasp
Leather Straps	Buckle Clasp
Rubber or Silicone Straps	Buckle Clasp Tang Buckle Deployant Clasp
NATO Straps	N/A
Sailcloth Straps	Buckle Clasp

Tools Required

Watchmaker’s Screwdriver
Spring Bar Tool or Tweezers
Jeweler’s Loupe (Optional)

Procedure

Identify the Clasp Type: Determine the type of clasp your watch band has. Refer to the table above for guidance.
Locate the Release Mechanism: Each clasp has a specific release mechanism. For example, fold-over clasps typically have a small button or lever that needs to be pressed to open the clasp.
Use the Appropriate Tool: Depending on the release mechanism, you will need to use the watchmaker’s screwdriver or spring bar tool.
Press or Pull the Release Mechanism: Gently press or pull the release mechanism. If using a spring bar tool, place the tips on either side of the spring bar and gently push inward.
Separate the Band from the Clasp: Once the release mechanism is unlocked, you can gently pull the watch band away from the clasp.
Remove the Spring Bars (if applicable): If the watch band is attached to the watch case with spring bars, use the spring bar tool to remove them. Position the tips of the tool on either side of the spring bar and push inward until it releases.

Removing the Case Back

The case back is the part of the watch that covers the movement. It can be held in place by a variety of methods, including screws, pressure, or a snap-on mechanism.

Screwed Case Backs

Screwed case backs are the most common type. They are typically secured by four or six small screws. To remove a screwed case back, you will need a small screwdriver that is the correct size for the screws.

Step 1: Find the Correct Screwdriver

The first step is to find a screwdriver that is the correct size for the screws on the case back. The screwdriver should be small enough to fit into the screw heads, but not so small that it slips out.

Step 2: Remove the Screws

Once you have the correct screwdriver, you can remove the screws from the case back. Be careful not to overtighten the screws, as this can damage the case back or the movement.

Step 3: Lift Off the Case Back

Once the screws are removed, you can lift off the case back. Be careful not to touch the movement, as this can damage it.

Pressure-Fit Case Backs

Pressure-fit case backs are held in place by a rubber or plastic gasket that creates a seal between the case back and the case. To remove a pressure-fit case back, you will need a case back opener.

Step 1: Find the Correct Case Back Opener

The first step is to find a case back opener that is the correct size for your watch. Case back openers are typically made of plastic or metal, and they have a variety of different shapes and sizes.

Step 2: Place the Case Back Opener on the Watch

Once you have the correct case back opener, you can place it on the watch. The case back opener should fit snugly around the case back.

Step 3: Turn the Case Back Opener

Once the case back opener is in place, you can turn it to remove the case back. Be careful not to turn the case back opener too far, as this can damage the case back or the movement.

Identifying the Movement

The movement is the heart of a watch, and it determines how the watch keeps time. There are two main types of watch movements: mechanical and quartz.

Mechanical movements use a series of gears and springs to power the watch. These movements are generally more expensive than quartz movements, but they are also more accurate and durable.

Quartz movements use a battery to power a quartz crystal. The crystal vibrates at a very precise frequency, which is used to keep time. Quartz movements are less expensive than mechanical movements, but they are also less accurate and durable.

To identify the movement of a watch, you will need to open the watch case. This can be done with a special watchmaker’s tool called a case opener. Once the case is open, you will be able to see the movement inside.

Identifying the Movement Type

The movement type can be identified by looking at the balance wheel. The balance wheel is a small, round wheel that is attached to the mainspring. In a mechanical movement, the balance wheel will have a hairspring attached to it. In a quartz movement, the balance wheel will not have a hairspring.

Identifying the Movement Caliber

The movement caliber is a number that identifies the specific model of the movement. The caliber number can be found on the movement itself. It is usually engraved on the main plate.

Accessing the Battery

Accessing the battery on a typical wristwatch requires carefully prying open the back cover or case. Here is a detailed step-by-step guide to opening a watch to access the battery:

1. Gather Tools:

You will need a small screwdriver or a watch repair kit with a suitable tool for opening the watch case.

2. Locate the Caseback Opening:

Examine the back of the watch and identify the caseback opening. It is usually a circular or rectangular recess with a small notch or groove.

3. Insert Tool and Pry Open:

Insert the screwdriver’s tip or the watch repair tool into the notch or groove and gently pry open the caseback. If the caseback is tightly sealed, apply gentle force and avoid damaging the watch or the tool.

4. Replace the Battery

The battery is typically held in place by a metal clip or bracket. Carefully remove the old battery and insert the new one, ensuring that its positive (+) and negative (-) terminals match the orientation of the old battery. Some watches may have a small metal tab that secures the battery; gently pry it up and replace it after inserting the new battery.

Battery Type	Typical Voltage	Average Lifespan
SR626SW	1.55V	2-3 years
CR2032	3V	4-6 years
CR2016	3V	2-4 years

Note: Refer to the watch manufacturer’s instructions or a watch repair professional for specific guidance on opening a particular watch model.

Removing the Hands

Removing the hands is a delicate process that requires patience and precision. Use the appropriate tools and exercise caution to avoid damaging the watch. Follow these steps carefully:

1. Prepare the Watch

Lay the watch face down on a soft cloth to prevent scratches. Secure the watch in place using a watch holder or tape to ensure stability.

2. Select the Correct Tool

Choose a dedicated watch hand remover. This tool is designed to fit snugly around the hand’s cannon pinion (the central post). Avoid using needle-nose pliers, as they can easily damage the hands.

3. Engage the Tool

Align the hand remover with the cannon pinion and gently press it down. Ensure that the tool is gripping the pinion securely, not the hand.

4. Apply Steady Pressure

Apply steady, gentle pressure downward while simultaneously rotating the hand remover counterclockwise. Do not apply excessive force, as this could damage the pinion or the watch movement.

5. Lift the Hand

Continue applying pressure and rotating the hand remover until you feel the hand loosen and lift away from the cannon pinion. Do not pull or pry at the hand, as this could damage its delicate components. Gently slide the hand off the pinion and place it in a safe location for later reassembly.

Hand Removal Techniques	Suitable for Watches with:
Tweezers	Plastic or low-friction hands
Watch Hand Lever	Thin hands or those without large counterweights
Hand Pullers	Thick or heavy hands, or those with fragile mechanisms

Dismantling the Dial

The dial is the front face of the watch that displays the time. To dismantle the dial, you will need to remove the hands, the crystal, and the dial itself.

Removing the Hands

The hands are held in place by friction. To remove them, you will need to use a watchmaker’s tool called a hand remover. This tool is a small, forked tool that fits under the hand and allows you to gently pry it off.

Removing the Crystal

The crystal is the clear cover that protects the dial. To remove the crystal, you will need to use a watchmaker’s tool called a crystal press. This tool is a small, hand-held press that allows you to gently press the crystal out of the case.

Removing the Dial

The dial is held in place by a series of screws. To remove the dial, you will need to use a watchmaker’s screwdriver. Be careful not to overtighten the screws when you put the dial back in place.

Dial Feet

The dial is typically held in place by four or more dial feet. These feet are small, metal tabs that are soldered to the dial. When the dial is installed in the watch case, the dial feet fit into corresponding holes in the case. The dial is then secured in place by screws that pass through the dial feet and into the case.

Dial Spacers

In some cases, dial spacers may be used to adjust the height of the dial in the watch case. Dial spacers are thin, metal washers that are placed between the dial and the movement. By adding or removing dial spacers, the watchmaker can ensure that the dial is properly aligned and that the hands clear the crystal.

Dial Gaskets

A dial gasket is a thin, rubber gasket that is placed between the dial and the watch case. The dial gasket helps to seal the watch case and prevent moisture from entering the movement. When replacing the dial, it is important to use a new dial gasket to ensure a proper seal.

Dial Component	Description
Dial Feet	Metal tabs that hold the dial in place
Dial Spacers	Metal washers used to adjust the dial height
Dial Gasket	Rubber gasket that seals the watch case

Cleaning the Parts

Thoroughly cleaning the watch’s parts is crucial for its optimal functioning and longevity. Begin by disassembling the watch, carefully separating the individual components. Utilize a lint-free cloth or soft brush to gently remove any dirt or debris from the exterior of the parts.

For more delicate cleaning, immerse the parts in a solution of warm, soapy water. Submerge them for a few minutes, then use a soft brush to gently remove any remaining dirt. Rinse the parts thoroughly with clean water and pat them dry with a lint-free cloth.

For stubborn dirt or grime, consider using a specialized watch cleaning solution. Apply the solution sparingly and follow the manufacturer’s instructions for proper usage. Remember to rinse the parts thoroughly after cleaning.

Cleaning the watch’s parts also includes checking for wear or damage. Inspect each component仔细 for signs of cracks, scratches, or deformation that might affect the watch’s performance. If any problems are identified, consult a professional watchmaker for repair or replacement.

By thoroughly cleaning and inspecting the watch’s parts, you significantly increase its lifespan and ensure its reliable operation.

Cleaning Tools and Materials

For effective cleaning, gather the following tools and materials:

Lint-free cloth

Soft brush

Warm, soapy water

Specialized watch cleaning solution (optional)

Drying cloth

Reassembling the Movement

With all the components cleaned, it’s time to reassemble the movement. Begin by placing the balance wheel back into its place and securing it with the balance spring. Gently guide the balance spring onto the stud and ensure it’s properly seated. Next, carefully replace the escape wheel and pallet fork, ensuring they align correctly. Finally, insert the mainspring, pivoting it into the barrel.

Now, it’s time for the intricate process of setting the jewels. Carefully align each jewel with its corresponding hole using tweezers. Apply a small amount of oil to the jewel before inserting it for smoother movement. Repeat this process for all the jewels in the movement.

Next, place the train bridge over the movement and secure it with screws. Make sure all the gears are meshing properly and that there’s no binding or looseness. Install the escapement bridge, which holds the escape wheel and pallet fork, and secure it in place.

Carefully place the dial on top of the movement, aligning it with the movement studs. Secure the dial with screws or push-in pins. Finally, attach the hands to the dial, starting with the hour hand, followed by the minute hand, and lastly, the second hand if your watch has one.

Step	Description
1	Insert the balance wheel.
2	Replace the escape wheel and pallet fork.
3	Install the mainspring.
4	Set the jewels.
5	Place the train bridge.
6	Install the escapement bridge.
7	Attach the dial.
8	Add the hands.

Replacing the Dial and Hands

9. Replacing the Hands

Replacing the hands is a more delicate task than replacing the dial. Here’s a step-by-step guide to ensure precision and avoid damage:

Remove the old hands carefully: Use tweezers to gently lift and remove the second hand, then the minute hand, and finally the hour hand. Avoid touching the movement or the gears.
Clean the hands and the movement: Use a cotton swab dipped in cleaning solution to clean any dirt or debris from the hands and the movement’s surface.
Apply a small amount of adhesive to the hand’s base: Use tweezers to apply a tiny drop of adhesive to the base of each hand. Do not overdo it, as excess adhesive can interfere with the movement.
Install the second hand: Hold the second hand by its center and align it with the second hand shaft on the movement. Gently press it down until it is firmly seated.
Install the minute hand: Place the minute hand over the minute hand shaft, ensuring it is centered and aligned correctly. Press it down gently to secure it.
Install the hour hand: Repeat the same process for the hour hand, aligning it with the hour hand shaft and pressing it down to secure it.
Check the alignment: Once all the hands are installed, check that they are properly aligned with the dial markers and move smoothly without any friction.
Reassemble the watch: Replace the dial, movement, and case back in the reverse order you disassembled them. Ensure that all components are securely fastened.

Closing the Case Back

Once the movement has been placed back into the case, it’s time to close the case back. This can be a tricky process, so it’s important to take your time and be careful not to damage the watch.

There are a few different ways to close a case back. The most common method is to use a case press. A case press is a specialized tool that applies even pressure to the case back, forcing it into place.

If you don’t have a case press, you can also use a pair of pliers. However, it’s important to be very careful when using pliers, as you don’t want to damage the watch.

Tips for Closing the Case Back

Make sure the case back is clean and free of debris.
Place the watch in the case press or pliers.
Apply even pressure to the case back until it snaps into place.
If you’re using a case press, be sure to use the correct size dies for your watch.
If you’re using pliers, be sure to wrap the jaws with tape or cloth to protect the watch.
Be patient and don’t try to force the case back into place.
If you’re having trouble closing the case back, don’t hesitate to take it to a watchmaker.
Once the case back is closed, check to make sure it’s sealed properly.
If the case back is not sealed properly, it can allow water and dust to enter the watch, which can damage the movement.
To check if the case back is sealed properly, place the watch in a glass of water and look for any bubbles escaping from the case.

Case Back Type	Closing Method
Screw-down	Use a case wrench to tighten the screws.
Snap-on	Press the case back into place with your fingers or a case press.
Bayonet	Align the bayonet lugs on the case back with the corresponding slots on the case and twist to lock into place.

How to Open Watch

To open a watch, you will need the following tools:

A small screwdriver
A pair of tweezers
A soft cloth

1. Place the watch on a soft cloth to protect it from scratches.
2. Use the small screwdriver to remove the screws from the back of the watch.
3. Carefully lift off the back of the watch.
4. Use the tweezers to remove the battery from the watch.
5. Use the soft cloth to clean the inside of the watch.
6. Replace the battery and the back of the watch.
7. Tighten the screws to secure the back of the watch.

Your watch is now open and ready to be repaired or replaced.

5 Simple Steps on How To Change Armitron Watch Time

When it comes to reliable and stylish timepieces, Armitron watches stand out as a popular choice. However, adjusting the time on an Armitron watch may seem like a daunting task, especially for first-time users. In this comprehensive guide, we will delve into the step-by-step process of changing the time on your Armitron watch, making it a breeze for you to master this simple yet essential task.

To begin, it’s crucial to familiarize yourself with the watch’s crown, which is typically located on the right-hand side of the watch. This small, protruding knob serves as the primary means of adjusting various settings on your watch, including the time. To change the time, gently pull the crown out to its first position. You will notice that the second hand stops moving, indicating that the watch is now in time-setting mode. Using the crown, rotate it either clockwise or counterclockwise to adjust the time forward or backward, respectively.

Once you have set the correct time, gently push the crown back into its original position. This will lock the time in place and resume the second hand’s movement. It’s important to ensure that the crown is fully pushed in to prevent any water damage to your watch. With these simple steps, you can easily adjust the time on your Armitron watch, ensuring it always displays the correct time and keeps you on schedule.

Setting the Time Using the Crown

The crown is typically located on the right-hand side of the watch case. It is usually a small, round knob that can be pulled out to set the time and date.

To set the time using the crown, follow these steps:

Pull out the crown to the first position. This will stop the second hand and allow you to set the time.
Turn the crown clockwise to move the hour hand forward. Turn the crown counterclockwise to move the hour hand backward.
Once the hour hand is set, pull out the crown to the second position. This will allow you to set the minute hand.
Turn the crown clockwise to move the minute hand forward. Turn the crown counterclockwise to move the minute hand backward.
Once the minute hand is set, push the crown back into the first position. This will restart the second hand and lock the time in place.

**Tips:**

If you need to change the date, pull out the crown to the second position and turn it counterclockwise.
If you want to set the time in 12-hour format, make sure the hour hand is set to the correct AM/PM position.
If you have a watch with a screw-down crown, you will need to unscrew the crown before you can pull it out.

Crown Position	Function
First position	Set the time
Second position	Set the date

Adjusting the Time Using the Quick-Set Button

This method is ideal for quickly setting the time without fumbling with multiple buttons. The Quick-Set button is generally located on the right side of the watch, opposite the watch face. It usually has a label or symbol indicating its function.

To adjust the time using the Quick-Set button:

1. Press and hold the Quick-Set button. The seconds display will begin to advance rapidly.

2. Once the seconds reach the correct position, release the button. The minutes will now start to advance.

3. Continue holding the button until the minutes are correct. Release the button again.

4. The hours will now start to advance. Hold the button until you reach the desired hour.

5. Release the button, and the time will be set.

Note: Some Armitron watches may have a slightly different Quick-Set procedure. Refer to your watch’s manual for detailed instructions.

Using the Rotating Bezel to Adjust the Time

The rotating bezel on an Armitron watch is a crucial feature for outdoor enthusiasts, divers, and anyone who needs to keep track of time in different time zones. Here’s a detailed guide on how to use it to adjust the time:

1. Locate the Rotating Bezel

The rotating bezel is the outer ring on the watch, usually marked with numbers or markers. It can be rotated clockwise or counterclockwise.

2. Align the 12 O’Clock Mark

To set the time, ensure that the triangle or arrow on the bezel is aligned with the 12 o’clock mark on the watch face.

3. Rotate the Bezel to the Desired Time

Now, grasp the bezel and rotate it clockwise or counterclockwise to the desired time. Each click on the bezel represents one hour. You can also rotate the bezel past the 24-hour mark to set the time in a different time zone.

4. Set the Time on the Watch Face

Once the bezel is at the correct time, pull out the watch’s crown to the first position (one click). This will stop the second hand and allow you to adjust the time on the watch face.

5. Adjust the Watch Face Hands

Turn the crown to set the hour, minute, and second hands to the desired time. Match the hands to the time displayed on the rotating bezel.

6. Push In the Crown

When the time is set correctly, press the crown back into the watch to resume normal operation.

Additional Tips

If the bezel is too tight to rotate, apply gentle pressure.
You can use the rotating bezel to track elapsed time by setting the triangle marker to the starting time and rotating the bezel until it aligns with the current time.
Some Armitron watches have a unidirectional bezel that can only rotate clockwise, which prevents accidental time changes.

Advanced Time Setting Tips and Tricks

Setting the Time Manually

To set the time manually, first pull the crown out to the second position. This will stop the second hand. Next, turn the crown clockwise or counterclockwise to adjust the time. Once the time is set, push the crown back in to the first position.

Setting the Time Using the Atomic Clock Signal

Some Armitron watches have the ability to set the time using the atomic clock signal. This signal is broadcast from Fort Collins, Colorado, and is accurate to within one second. To set the time using the atomic clock signal, first make sure that your watch is in range of the signal. Next, pull the crown out to the second position and hold it there for a few seconds. The second hand will start to move, and the watch will automatically adjust the time to match the atomic clock signal.

Setting the Time for Different Time Zones

If you travel frequently, you may need to set your watch to different time zones. To do this, first pull the crown out to the third position. This will stop the second hand and allow you to adjust the hour and minute hands. Turn the hour hand clockwise or counterclockwise to adjust the time for the new time zone. Once the time is set, push the crown back in to the first position.

Calibrating the Watch

Over time, watches can lose or gain time. To calibrate your watch, first set the time manually using one of the methods described above. Next, observe the watch for a few days and note how much time it loses or gains. Once you have a good estimate of how much time the watch is losing or gaining, you can adjust the regulator to correct the error.

Here is a table that summarizes the different time setting options available on Armitron watches:

Time Setting Option	How to Set
Manually	Pull the crown out to the second position and turn it clockwise or counterclockwise to adjust the time. Push the crown back in to the first position when finished.
Using the Atomic Clock Signal	Make sure the watch is in range of the atomic clock signal. Pull the crown out to the second position and hold it there for a few seconds. The watch will automatically adjust the time to match the atomic clock signal.
For Different Time Zones	Pull the crown out to the third position. Turn the hour hand clockwise or counterclockwise to adjust the time for the new time zone. Push the crown back in to the first position when finished.
Calibrating the Watch	Observe the watch for a few days and note how much time it loses or gains. Adjust the regulator to correct the error.

How to Change Armitron Watch Time

Follow these steps to adjust the time on your Armitron watch:

Pull out the crown to the second position (one click out).
Turn the crown clockwise to adjust the hour hand. When the correct hour is reached, turn the crown counterclockwise to fine-tune the minute hand.
Push the crown back in to the first position to save the changes.

Troubleshooting Common Time Adjustment Issues

The time can’t be adjusted

If the time cannot be adjusted, it may be because the crown is not pulled out far enough. Ensure that the crown is pulled to the second position (one click out) before attempting to adjust the time.

The time is incorrect after adjustment

If the time is incorrect after adjusting it, it may be because the watch is not set to the correct time zone. To set the time zone, pull out the crown to the third position (two clicks out) and turn it clockwise or counterclockwise until the correct time zone is displayed. Push the crown back in to the first position to save the changes.

The time keeps resetting

If the time keeps resetting, it may be because the battery is low. Replace the battery with a new one of the same type.

The watch is not digital

The steps outlined above only apply to digital Armitron watches. If you have an analog Armitron watch, you will need to use the following steps to adjust the time:

Pull out the crown to the second position.
Turn the crown to move the hour and minute hands to the correct time.
Push the crown back in to the first position to save the changes.

Synchronizing Your Armitron Watch with an Atomic Clock

You can manually set your Armitron watch to the current time, but you can also synchronize it with an atomic clock. This will ensure that your watch is always accurate, even if you travel across time zones. To synchronize your Armitron watch with an atomic clock, you will need:

An Armitron watch that is capable of receiving the atomic clock signal
A clear view of the sky
A quiet location

Once you have gathered your materials, follow these steps:

Put your watch in a location where it has a clear view of the sky.
Make sure that the watch is not near any metal objects, as this can interfere with the signal.
Press and hold the “Set” button on the watch for 3 seconds.
The watch will now enter synchronization mode.
The watch will automatically search for the atomic clock signal.
Once the watch has found the signal, it will set the time and date.

It is important to note that not all Armitron watches are capable of receiving the atomic clock signal. If you are not sure if your watch is capable of receiving the signal, you can contact Armitron customer service.

Model	Signal
WR112	WWVB
WR113	DCF77
WR114	JJY
WR115	MSF

Maintaining the Accuracy of Your Watch’s Timekeeping

To ensure that your Armitron watch keeps accurate time, it’s essential to follow a few simple guidelines:

Avoid Extreme Temperatures

Extreme temperatures can affect the watch’s movement, causing it to run faster or slower. Avoid exposing the watch to prolonged periods of heat or cold.

Minimize Impacts

Rough impacts or accidental drops can jar the watch’s movement, compromising its accuracy. Handle the watch with care and protect it from sudden jolts.

Service the Watch Regularly

Regular servicing by a qualified watchmaker is crucial for maintaining the watch’s precision. Servicing typically involves cleaning, lubrication, and adjustment of the movement, which can restore its optimal performance.

Minimize Magnetic Fields

Exposure to strong magnetic fields can temporarily or permanently magnetize the watch’s components, causing it to gain or lose time. Keep the watch away from appliances such as MRI scanners, magnets, and electronic devices.

Set the Time Manually

When setting the time, avoid using the crown to move the second hand forwards and backwards. This can stress the movement and potentially affect its accuracy. Instead, set the time in one direction only.

Calibrate the Watch

If you suspect that the watch is not keeping accurate time, you can calibrate it using a time signal or a reliable reference timepiece. Instructions for calibration vary depending on the specific watch model.

Calibrating Your Armitron Watch for Precise Timekeeping

Once you have set the time on your Armitron watch, you may need to calibrate it for precise timekeeping. This process involves adjusting the watch’s timekeeping accuracy by comparing it to a reference time source, typically an atomic clock or a highly accurate wristwatch.

Step 8: Fine-Tuning for Precision

Once you have completed the initial calibration, you can further fine-tune the watch’s accuracy by observing its performance over time. Wear the watch for several days and note any deviations from the reference time source. If necessary, make minor adjustments to the timekeeping parameters using the aforementioned steps. It is important to be patient and meticulous during this process, as it may take several iterations to achieve optimal precision.

Setting Armitron Watch Time

Adjusting the time on your Armitron watch is a straightforward process, whether you have a digital or analog model. Here’s a step-by-step guide:

**For Digital Armitron Watches:**

1. Press and hold the "Mode" button until you see the time setting mode.
2. Use the "+" and "-" buttons to adjust the hours, then press "Mode" again.
3. Repeat for the minutes and any additional settings (e.g., date, time zone).
4. Press "Mode" one final time to exit the setting mode.

**Special Considerations for Analog Armitron Watches:**

1. Locate the crown on the side of the watch.
2. Pull the crown out to the first position (first click). This will unlock the hands.
3. Rotate the crown to adjust the hours.
4. Pull the crown out to the second position (second click). This will allow you to set the minutes.
5. Rotate the crown to adjust the minutes.
6. Push the crown all the way back into its original position. This will lock the hands and save the new time.

**Additional Notes for Analog Armitron Watches:**

1. If your watch has a screw-down crown, you will need to unscrew it before pulling it out.
2. When setting the time, it is recommended to set it to a few minutes ahead of the actual time to account for any slight inaccuracies in the watch's movement.
3. If your watch is not keeping accurate time, you may need to have it calibrated by a professional watchmaker.
4. Some analog Armitron watches have a "hack" feature that allows you to stop the seconds hand while setting the time. To use this feature, pull the crown out to the second position and then back in quickly to stop the seconds hand.
5. If you have any questions or encounter any difficulties, please refer to the user manual or contact Armitron customer service for assistance.

Adjusting Armitron Watch Time

1. Pull Out the Crown

Locate the crown, a small knob on the side of your watch. Pull it out to the first position to change the hour and minute hands.

2. Rotate the Crown

Turn the crown clockwise or counterclockwise to adjust the hour and minute hands to the correct time.

3. Push In the Crown

Once the time is set, gently push the crown back into place to lock it.

Maintaining Your Armitron Watch for Optimal Performance

1. Clean Regularly

Use a soft cloth to gently wipe away dirt and debris from the watch’s exterior and band. Avoid using harsh chemicals or solvents.

2. Change Battery Promptly

Replace the battery when it runs low to ensure uninterrupted watch operation. Refer to the watch’s manual for specific battery replacement instructions.

3. Handle with Care

Avoid dropping or subjecting the watch to excessive shocks or vibrations. This can damage the delicate mechanisms inside.

4. Protect from Water

Follow the water resistance rating of your watch. Do not expose it to water beyond its designated depth to prevent water damage.

5. Avoid Extreme Temperatures

Protect the watch from extreme heat or cold, as it can affect its accuracy and performance.

6. Calibrate Regularly

If the watch starts to lose or gain significant time, consider calibrating it. This involves using a specialized tool or consulting a watch repair professional.

7. Store Properly

When not in use, store the watch in a cool, dry place away from direct sunlight. Use a watch case or box for protection.

8. Avoid Magnetic Fields

Keep the watch away from strong magnetic fields, such as those produced by magnets or electronic devices. This can interfere with its timekeeping accuracy.

9. Service Regularly

Take the watch to a qualified watch repair professional for regular servicing and maintenance. This will help prolong its life and ensure optimal performance.

10. Troubleshooting Common Problems

Symptom: Watch Stops Suddenly

Possible Causes	Solutions
Weak battery	Replace the battery.
Improper crown operation	Ensure the crown is pushed in securely.
Mechanical failure	Contact a watch repair professional.

How To Change Armitron Watch Time

To change the time on your Armitron watch, pull and then turn the crown (the small knob on the side of the watch) clockwise until the hour hand moves to the correct hour. Then, turn the crown counterclockwise to move the minute hand to the correct minute. Once the time is set, push the crown back into its original position.

If your Armitron watch has multiple time zones, you can change the time zone by following these steps:

Pull out the crown to the first position.
Turn the crown clockwise to move the hour hand to the correct time for the desired time zone.
Push the crown back into its original position.

Safety Precautions

Essential Precautions:

Specific Considerations:

Identifying the Caseback Type

Removing a Screw-Back Caseback

Tools You’ll Need

Step 1: Prepare the Watch

Step 2: Insert the Caseback Opener Tool

Step 3: Gently Pry Open the Caseback

Removing a Snap-On Caseback

1. Gather tools

2. Pry the caseback off

3. Remove the caseback

4. Detailed Instructions for Difficult Cases

Removing a Bayonet-Style Caseback

Tips for Removing a Bayonet-Style Caseback

Removing a Pressure-Fitted Caseback

1. Gather Required Tools:

2. Protect the Watch:

3. Insert Case Opener Blade:

4. Apply Pressure and Wiggle:

5. Remove the Caseback:

6. Cleaning and Inspection:

Gasket Maintenance:

Avoiding Common Mistakes

1. Using the wrong tool

2. Overtightening

3. Forcing the back open

4. Damaging the gasket

5. Losing small parts

6. Touching the movement

7. Watch back shapes and methods for removing them

Utilizing Specialized Tools

Case Opener

Case Knife

Watchmaker’s Pliers

Watchmaker’s Screwdriver

Watch Press

Case Back Remover

Watch Back Opener

Reassembling the Watch

1. Clean the Case Back

2. Apply a Thin Layer of Grease

3. Replace the Case Back

4. Screw On the Case Back

5. Press On the Case Back

6. Wipe Off Excess Grease

7. Check the Water Resistance

8. Set the Time and Date

9. Inspect the Watch for Any Issues

Troubleshooting Reassembly Issues

Maintaining Your Watch

1. Gather the Necessary Tools

2. Protect the Watch

3. Insert the Knife or Screwdriver

4. Pry Open the Back

5. Remove the Back

6. Inspect the Gasket

7. Clean the Inside of the Watch

8. Reinstall the Back

9. Tighten the Back

10. Wipe Down the Watch

How To Remove The Back Of A Watch

People Also Ask

How do I remove the back of a screw-down watch?

How do I remove the back of a waterproof watch?

How do I remove the back of a watch without tools?

Creating a DIY Tool from a Spoon

Vacuum Device Assistance

Specialized Tools for the Task

Additional Tips

How To Take The Back Off A Watch

People Also Ask About How To Take The Back Off A Watch

How do I open the back of a watch without a tool?

You can use a small screwdriver or a coin to remove the back of the watch. To do this, follow these steps:

How do I remove a screw back watch?

To remove a screw back watch, you will need a special tool called a watch back remover. This tool is available at most hardware stores or online. You can also use a small screwdriver or a coin, but be careful not to damage the watch.

Can I change a watch battery myself?

Finding the Time Setting Button

Entering Set Mode