10 Easy Ways to Fix a Non-Charging PS4 Controller

10 Easy Ways to Fix a Non-Charging PS4 Controller

In the midst of intense gaming sessions, encountering a non-charging PS4 controller can be a frustrating ordeal. This electrical malfunction not only interrupts your gaming flow but also raises concerns about the controller’s longevity. However, before resorting to purchasing a replacement, it is worth exploring potential solutions to revive your trusty controller.

To begin, check for any physical damage to the charging port or cable. Inspect the port for bent or broken pins, and ensure the cable is free of any visible wear or tear. If any abnormalities are detected, attempt to clean the port gently with a cotton swab or a can of compressed air. Furthermore, try using a different charging cable or a different USB port on your console or computer to rule out any compatibility issues.

If the initial troubleshooting steps fail to resolve the issue, the problem may lie deeper within the controller’s internal circuitry. In such cases, it may be necessary to reset the controller. To do this, locate the small reset button located on the back of the controller near the L2 button. Use a paperclip or a similar object to press and hold the button for about 5 seconds until the controller’s light bar flashes. This process should reset the controller’s software and potentially resolve any charging issues.

Check for Physical Damage

Inspect the Charging Port

Meticulously examine the charging port on both the controller and the charging cable for any visible signs of damage, such as bent or broken pins. To do this, gently tilt the charging port and inspect it under a bright light. If you notice any deformities or corrosion, it may indicate physical damage that could hinder charging.

Clean the Charging Port

Sometimes, dust or debris can accumulate in the charging port, preventing a proper connection. Use a soft brush or a compressed air can to gently remove any buildup. Avoid using sharp objects or excessive force, as this could further damage the port.

Test with Different Cables and Ports

To rule out issues with the charging cable or charging source, try using different cables and plugging the controller into multiple USB ports, including both on the PS4 console and on a computer. If the controller charges with a different cable or port, the problem likely lies with the original components.

Possible Damage Troubleshooting Steps
Bent or broken pins in charging port Contact Sony support for repair
Corrosion or debris in charging port Clean the charging port with a soft brush or compressed air
Faulty charging cable Try using a different charging cable
Defective USB port Try plugging the controller into a different USB port

Disable Bluetooth Connection

If you’re still having trouble connecting your controller, try disabling Bluetooth on your PS4 console. This will force the controller to use a wired connection, which is more reliable than Bluetooth. To do this:

  1. On your PS4 console, go to Settings > Devices > Bluetooth Devices.
  2. Select your controller from the list of devices.
  3. Press the Options button on your controller.
  4. Select Forget Device.
  5. Now, connect your controller to your PS4 console using a USB cable.
  6. Once your controller is connected, go to Settings > Devices > Controllers.
  7. Select your controller from the list of controllers.
  8. Toggle the Enable Bluetooth Connection setting to Off.

Your controller will now be connected to your PS4 console using a wired connection. This should resolve any issues you were having with your controller not charging.

Bluetooth Connection Wired Connection
Less reliable More reliable
May cause interference with other devices Does not cause interference with other devices
Requires a clear line of sight between the controller and the console Does not require a clear line of sight between the controller and the console

Verify the Power Source

If your PS4 controller isn’t charging, the first step is to verify the power source. Here are a few things to check:

1. Check the charging cable. Make sure that the charging cable is securely connected to both the controller and the power source. If the cable is loose or damaged, it may not be providing enough power to charge the controller.

2. Try a different power source. If you’re using a USB port on your PS4 console, try plugging the charging cable into a different USB port. Alternatively, you can try plugging the charging cable into a wall outlet using a USB adapter.

3. Check the power outlet. If you’re using a wall outlet, make sure that the outlet is working properly. You can verify this by plugging in another device, such as a lamp or a phone charger.

4. Inspect the charging port on the controller. Look for any dirt or debris that may be blocking the port. If the port is dirty, use a cotton swab to gently clean it out.

5. Reset the controller. To reset the controller, press and hold the reset button on the back of the controller for about 5 seconds. This will clear any errors that may be preventing the controller from charging.

6. Update the controller firmware. If your controller is not charging, it may need a firmware update. To update the firmware, connect the controller to your PS4 console using a USB cable. Then, go to the Settings menu and select “System Software Update.” If there is a firmware update available, it will be downloaded and installed.

7. Contact PlayStation Support. If you have tried all of the above troubleshooting steps and your controller is still not charging, you may need to contact PlayStation Support for further assistance.

Power Source Troubleshooting Steps
USB port on PS4 console – Check the charging cable connection.
– Try a different USB port.
– Reset the controller.
– Update the controller firmware.
Wall outlet – Check the charging cable connection.
– Inspect the charging port on the controller.
– Check the power outlet.
– Reset the controller.
– Update the controller firmware.

How to Fix a Non-Charging PS4 Controller

If your PS4 controller is not charging, there are a few things you can do to try and fix the problem. First, check to make sure that the controller is properly plugged into the PS4 console. The charging port is located on the top of the controller, next to the headphone jack. If the controller is not plugged in all the way, it may not be able to charge.

If the controller is plugged in properly, try resetting it. To do this, press and hold the reset button on the back of the controller for about 5 seconds. The reset button is a small, recessed button that is located near the L2 button. After resetting the controller, try plugging it back into the PS4 console and see if it starts charging.

If the controller still does not charge, there may be a problem with the charging port or the battery. You can try cleaning the charging port with a cotton swab and rubbing alcohol. If that does not work, you may need to replace the charging port or the battery.

People Also Ask

Why is my PS4 controller not charging when plugged in?

There are a few reasons why your PS4 controller may not be charging when plugged in. First, check to make sure that the controller is properly plugged into the PS4 console. The charging port is located on the top of the controller, next to the headphone jack. If the controller is not plugged in all the way, it may not be able to charge.

If the controller is plugged in properly, try resetting it. To do this, press and hold the reset button on the back of the controller for about 5 seconds. The reset button is a small, recessed button that is located near the L2 button. After resetting the controller, try plugging it back into the PS4 console and see if it starts charging.

If the controller still does not charge, there may be a problem with the charging port or the battery. You can try cleaning the charging port with a cotton swab and rubbing alcohol. If that does not work, you may need to replace the charging port or the battery.

How do I reset my PS4 controller?

To reset your PS4 controller, press and hold the reset button on the back of the controller for about 5 seconds. The reset button is a small, recessed button that is located near the L2 button. After resetting the controller, try plugging it back into the PS4 console and see if it starts charging.

What do I do if my PS4 controller is still not charging?

If your PS4 controller is still not charging, there may be a problem with the charging port or the battery. You can try cleaning the charging port with a cotton swab and rubbing alcohol. If that does not work, you may need to replace the charging port or the battery.