schlage-lock-reset Archives * flexco.com

5 Easy Steps to Change Your Schlage Door Code

In the realm of home security, the ability to effortlessly alter access codes is paramount. Whether you’ve recently moved into a new abode or simply wish to enhance your current security measures, changing the code on your Schlage lock is a straightforward process that can be accomplished with ease. By following a series of simple steps, you can rest assured that your home remains protected while granting authorized individuals convenient entry.

The Schlage lock, renowned for its reliability and durability, boasts a user-friendly design that makes code modification a breeze. Unlike traditional locks that require disassembly or the assistance of a locksmith, the Schlage lock empowers you to swiftly and securely update its access code without the need for specialized tools or expertise. This feature not only saves you time and money but also provides peace of mind knowing that your home security is entirely under your control.

Before embarking on the code-changing process, ensure that you have the correct tools on hand. While most Schlage locks come equipped with a unique key, some models may require the use of a programming tool. Refer to your lock’s manual or consult the Schlage website to determine the specific requirements for your lock model. With the necessary tools at your disposal, you can proceed with the code-changing process with confidence.

Removing the Old Code

Changing the code on a Schlage is a relatively simple process, but it does require some preparation and attention to detail. Before you begin, gather the following tools and materials:

A Phillips head screwdriver
A new Schlage key code

A small piece of paper to write down the new code

If you don’t have a new key code, you must remove the old one from the lock’s interior first. To do this, follow these steps:

Remove the faceplate from the lock by unscrewing the two screws at the top of the faceplate.
Locate the small plastic tab on the inside of the lock, just above the keyhole.
Use a small screwdriver to depress the tab and lift the old key code out of the lock.
Write down the old key code on a piece of paper so you can refer to it later.
Replace the old key code with the new key code, making sure it is facing the correct direction.
Replace the faceplate on the lock and tighten the screws.
Test the new key code by inserting a key and turning it. The lock should open smoothly.

Program the Lock Manually

If you prefer to program your Schlage lock manually, you can follow these steps:

1. Remove the Battery Cover

Locate the battery cover at the bottom of the lock’s keypad. Use a screwdriver or your fingernail to gently pry it off.

2. Press the Programming Button

Once the battery cover is removed, you will see a small red button labeled “Program.” Press and hold this button for 2 seconds until the lock beeps.

3. Enter the New User Code

After the lock beeps, enter the new user code. The code must be between 4 and 8 digits long.

4. Create a Master Code

After entering the new user code, the lock will prompt you to create a master code. The master code is used to delete or change user codes and reset the lock’s settings. To create a master code, follow these steps:

a. Press the “1” and “3” Keys Simultaneously

This will initiate the master code programming mode.

b. Enter the New Master Code

Enter the new master code. The code must be between 6 and 8 digits long.

c. Press the “Prog” Button

Once you have entered the new master code, press the “Prog” button to save the changes.

5. Insert the Batteries

Once you have finished programming the lock, insert the batteries into the battery compartment and close the cover.

Utilizing a Master Code

1. Retrieve Your Master Code

Begin by locating your Schlage keypad’s front panel. Grip its bottom edge and pull it firmly towards you to detach it from the baseplate.

2. Access the Programming Button

Once the front panel is removed, you’ll see a small, black button inside the keypad mechanism. This is the programming button.

3. Enter Master Code Programming Mode

Press and hold the programming button for about 10 seconds. The keypad should emit a beep, indicating you’ve entered programming mode.

4. Input the Master Code

Enter your master code by pressing the corresponding number keys on the keypad. The keypad should emit another beep to acknowledge your input.

5. Select Code to Change

Use the arrow keys to navigate through the list of stored codes until you find the one you wish to modify.

6. Reprogram the Selected Code

Enter the new code by pressing the corresponding number keys. You can create a code consisting of 4 to 8 digits, ensuring it’s different from any existing codes.

7. Repeat for Additional Codes

If you need to change multiple codes, press the programming button again to re-enter programming mode and repeat steps 5 and 6 for each code.

8. Exit Programming Mode

Once all desired codes have been changed, remove the keypad from programming mode by pressing the programming button for about 5 seconds. The keypad should emit a double beep to indicate that you’ve successfully exited programming mode.

9. Reattach Front Panel

Realign the front panel with the baseplate and press it firmly until it clicks into place.

Backup Code

When programming a new Schlage lock, you must enter a unique backup code that will serve as a reset code in case you forget your primary code. This code is vital and should be stored securely. It can be found on the back of the lock’s battery pack. Keep this code confidential and accessible for future reference.

Programming Options

Schlage locks offer flexible programming options to accommodate different access needs. There are three primary methods:

Option	Description
Master Code	This is the main code used to manage the lock’s settings and create additional codes. It has the highest level of access.
User Code	These are personalized codes assigned to specific users. They do not have administrative privileges and can only unlock the door.
Temporary Code	These are temporary codes that can be programmed for limited durations or access. They are ideal for guests or short-term visitors.

Programming a Schlage Lock

To program a Schlage lock, follow these steps:

Enter the master code.
Press the asterisk (*) button.
Enter the new user code.
Press the pound (#) button to confirm.

Troubleshooting Common Issues

1. Code Not Accepted

Ensure the code is entered correctly. If it still doesn’t work, try resetting the lock by pressing the “Reset” button with a paperclip or thin object.

2. Lock Doesn’t Open

Check if the batteries are low and replace them if necessary. Also inspect the door jamb for any obstructions that may be preventing the latch from engaging.

3. Keypad Not Working

Clean the keypad with a damp cloth. if it still doesn’t work, the keypad may need to be replaced.

4. Auto-Lock Not Working

Ensure that the auto-lock feature is enabled in the settings. If it is, check the door jamb for any obstructions that may be interfering with the latch.

5. Door Not Closing Properly

Inspect the door frame and strike plate for any misalignment. Adjust the strike plate if necessary to ensure the door closes securely.

6. Beep Codes

Refer to the user manual for the specific beep code meanings. They usually indicate low battery or an incorrect code.

7. Wi-Fi Connectivity Issues

Check if your Wi-Fi network is active and stable. Also ensure the lock is within range of the router. If issues persist, try resetting the lock.

8. Advanced Troubleshooting

If you encounter more complex issues, refer to the table below for advanced troubleshooting steps:

How To Change Code

To change the code on your Schlage lock, you will need to follow these steps:

Enter your current code into the keypad.
Press the “Schlage” button.
Press the “1” button.
Enter your new code (between 4 and 8 digits).
Press the “Schlage” button again.

Your new code will now be active.

Issue	Troubleshooting Steps
Lock won’t pair with Wi-Fi	Check firewall settings, disable Bluetooth on your device, reset the lock, and try pairing again.
Alexa/Google Assistant integration failed	Ensure the lock is properly connected to Wi-Fi, check the app settings for integration, and follow the manufacturer’s instructions.
Code not working remotely	Confirm the lock is connected to Wi-Fi, ensure the correct code is entered, and check the app settings for any limitations.
App not detecting the lock	Ensure Bluetooth is enabled on your device, check the lock’s batteries, and try refreshing the app or restarting your device.

10 Steps to Reset Your Schlage Door Code

Have you ever forgotten your Schlage door code and found yourself locked out of your home? Don’t worry; you’re not alone. It’s a common problem that can be easily fixed. In this article, we’ll guide you through the process of resetting your Schlage door code, whether you have the original master code or not. We’ll also provide tips on how to choose a secure code and how to troubleshoot common problems.

If you have the original master code, resetting your Schlage door code is relatively simple. First, locate the programming button on the inside of the lock. It’s usually hidden behind the battery cover. Once you’ve found the programming button, press and hold it for about 5 seconds. The lock will emit a beep, and the keypad will light up. Enter your new code twice, and then press the programming button again. The lock will beep again, and the new code will be saved.

If you don’t have the original master code, resetting your Schlage door code is a bit more complicated. You’ll need to use the factory reset code, which is usually 12345. However, it’s important to note that using the factory reset code will erase all of the codes that are currently programmed into the lock. Once you’ve entered the factory reset code, the lock will beep, and the keypad will light up. Enter your new code twice, and then press the programming button again. The lock will beep again, and the new code will be saved.

Safety Precautions to Take

Before attempting to reset your Schlage door code, it is crucial to take the following safety precautions:

1. Ensure that you have physical access to the door from the outside. Resetting the code may temporarily lock you out of the building if you do not have an alternative way to enter.

2. Gather Necessary Tools and Information

To successfully reset your Schlage door code, you will need the following:

A small Phillips head screwdriver
A Schlage programming key
The Schlage door lock’s serial number (typically located on the back of the lock)

Additionally, it is recommended to do the following before initiating the reset process:

Make a backup of your existing code. This step ensures that you can easily restore the code if the reset process is interrupted or unsuccessful.
Choose a new code that is secure and easy to remember. Avoid using common combinations or personally identifiable information.
Have a plan for re-entering the building in case of an emergency. This could involve contacting a locksmith or having a spare key accessible.

By taking these precautions, you can help ensure a smooth and successful Schlage door code reset.

Identifying Your Schlage Model

To determine the model of your Schlage lock, follow these steps:

Locate the

Model Number

tag on the faceplate or inside the lock mechanism. It typically begins with the letter “FE” followed by a series of numbers, such as “FE599.”
Check the

Backset

, which is the distance from the edge of the door to the center of the deadbolt hole. Common backsets are 2-3/8 inches and 2-3/4 inches.

Identify the

Lock Type

by examining the shape and function of the lock. Common Schlage lock types include deadbolts, handle sets, and lever sets.

Lock Type	Features
Deadbolt	Single-cylinder or double-cylinder; thumbturn or key-operated from the inside
Handle Set	Lever or knob; single-cylinder or double-cylinder
Lever Set	Lever; single-cylinder or double-cylinder

Note the

Finish

of the lock, which refers to the color or material of the exterior components, such as satin nickel, polished brass, or black.

How To Reset Schlage Door Code

If you’ve forgotten your Schlage door code or if it’s no longer working, you can easily reset it by following these steps:

Remove the battery cover from the keypad.
Locate the “reset” button on the inside of the battery cover.
Use a small object, such as a paperclip, to press and hold the “reset” button for 10 seconds.
Release the “reset” button and replace the battery cover.
Your Schlage door code has now been reset to the default factory code, which is usually “1234”.

3 Quick Ways to Reset Code on Schlage Lock

Misplacing or forgetting the code to your Schlage lock can be a frustrating experience, preventing you from accessing your home. Fortunately, there’s a way to reset the code without the hassle of calling a locksmith. This comprehensive guide will walk you through the steps to reset the code on your Schlage lock, empowering you to regain control over your home’s security.

Before embarking on the reset process, ensure you have the correct tools for the job. You’ll need a screwdriver, a small pin or paperclip, and the Schlage programming card that came with your lock. Additionally, it’s crucial to work in a well-lit area where you can see clearly. Once you have gathered the necessary materials, follow the steps outlined in the following paragraphs to successfully reset the code on your Schlage lock.

To initiate the reset process, locate the small reset button situated inside the battery compartment of your Schlage lock. Using a paperclip or small pin, gently press and hold the reset button for approximately 10 seconds. While holding the reset button, insert the Schlage programming card into the designated slot on the lock. The lock will emit a series of beeps to indicate that it has entered programming mode. From here, you can proceed to set a new code for your Schlage lock by following the remaining steps.

Gather Necessary Tools

Tools Required:

Tool	Description
Schlage Lock Reset Key	A unique tool provided with the lock for resetting the code.
Phillips-Head Screwdriver	For removing the lock’s faceplate.
Flat-Head Screwdriver	For pressing the reset button on the lock’s interior.
Clean Cloth	For wiping away any dust or debris from the lock.

Additional Tips:

* Ensure you have the correct reset key for your specific Schlage lock model.
* Work in a well-lit area with ample space to avoid mistakes.
* If you do not have the reset key, contact Schlage customer support for assistance.

Locate Reset Button

Finding the reset button on your Schlage lock is crucial for restoring the device to its default settings. Here’s a detailed guide to help you locate the reset button:

Inside the Battery Compartment

For some models, the reset button is tucked inside the battery compartment. To access it, follow these steps:

Remove the battery cover.
Locate the small, recessed button in the battery compartment.
Use a paper clip or similar object to press and hold the reset button for 10 seconds.

Beneath the Escutcheon

In some Schlage models, the reset button is located beneath the escutcheon (the metal plate that covers the keypad). Here’s how to find it:

Remove the escutcheon by unscrewing the two screws that secure it to the door.
Locate the small reset button on the lock’s interior.
Press and hold the reset button for 10 seconds.

Inside the Lock Mechanism

For the remaining Schlage models, the reset button is concealed within the lock mechanism. To access it, you’ll need to disassemble the lock as follows:

Table of Disassembly Steps

Step	Instruction
1	Remove the faceplate.
2	Unscrew the two screws that hold the lock mechanism in place.
3	Pull out the lock mechanism.
4	Locate the reset button inside the lock mechanism.
5	Press and hold the reset button for 10 seconds.

Once you’ve found the reset button, follow the lock’s specific reset instructions to restore it to its factory settings.

Insert Reset Pin

The reset pin is a small, usually plastic, tool that comes with your Schlage lock. It is used to reset the lock to its factory settings, which will erase all of the programmed codes.

To insert the reset pin, follow these steps:

Locate the reset button on the inside of the lock. It is usually located near the bottom of the lock, behind the battery cover.
Insert the reset pin into the button, and push it in gently until you hear a click.
Hold the reset pin in for about 10 seconds, until the lock beeps and the LED light flashes.

Once you have inserted the reset pin, the lock will be reset to its factory settings. You will need to reprogram the lock with a new code before you can use it again.

Step	Description
1	Locate the reset button on the inside of the lock.
2	Insert the reset pin into the button and push it in gently until you hear a click.
3	Hold the reset pin in for about 10 seconds, until the lock beeps and the LED light flashes.

Depress Reset Button

The reset button is typically located on the inside of the lock, beneath the battery compartment. To depress the reset button, use a small, pointed object such as a pen or paperclip. Press and hold the reset button for at least 10 seconds. The lock will emit a series of beeps to indicate that it has been reset.

Once the lock has been reset, all of the user codes will be deleted. You will need to reprogram the lock with new user codes before you can use it again.

Additional Information

Here are some additional things to keep in mind when resetting your Schlage lock:

If you do not know the current user code, you will not be able to reset the lock.
Resetting the lock will not delete any of the programmed access codes.
If you reset the lock, you will need to reprogram any keypads that are connected to the lock.

Reset Button Location	Lock Model
Inside the lock, beneath the battery compartment	Schlage Connect, Schlage Encode, Schlage Sense
On the back of the lock, near the bottom	Schlage BE365
Inside the lock, behind the faceplate	Schlage F Series

Release Reset Button

To access the reset button, remove the battery cover on the back of the lock. You will see a small, round button located near the top of the battery compartment. Use a paperclip or a similar object to press and hold the reset button for about 10 seconds.

While holding the reset button, you will hear the lock beep twice. Release the button after the second beep. The lock will now be reset to factory default settings.

Here is a table summarizing the steps for releasing the reset button:

Step	Action
1	Remove the battery cover on the back of the lock.
2	Locate the small, round reset button near the top of the battery compartment.
3	Use a paperclip or a similar object to press and hold the reset button for about 10 seconds.
4	Release the button after the second beep.
5	The lock will now be reset to factory default settings.

Remove Reset Pin

If you have forgotten the reset pin, you can perform a factory reset by following these steps:

Press and hold the Schlage button for 10 seconds.
Release the button and then press it again for 3 seconds.
Release the button and then press the # key.
Enter the factory default code (00, 00, 00, 00).
The lock will now be reset to the factory default settings.

Factory Default Code	Value
User Code 1:	00, 00, 00, 00
User Code 2:	00, 00, 00, 01
User Code 3:	00, 00, 00, 02
User Code 4:	00, 00, 00, 03

Please note that performing a factory reset will erase all existing codes and settings from the lock. It is recommended to create a new master code and reprogram the lock after performing a factory reset.

Enter New Master Code

To reset the code on your Schlage lock, you must first enter a new master code. This code will be used to override all other codes on the lock. To enter a new master code:

1. Press and hold the Schlage button for 3 seconds.
2. Enter the existing master code.
3. Press the Schlage button again.
4. Enter the new master code.
5. Press the Schlage button again.
6. The new master code has now been programmed into the lock.

Here is a table summarizing the steps to enter a new master code:

Step	Action
1	Press and hold the Schlage button for 3 seconds.
2	Enter the existing master code.
3	Press the Schlage button again.
4	Enter the new master code.
5	Press the Schlage button again.
6	The new master code has now been programmed into the lock.

Once you have entered a new master code, you can use it to reset the code on your Schlage lock. To do this, simply follow the steps in the “Reset Code” section of this guide.

Re-insert Reset Pin

Step 8: Re-insert Reset Pin

Once the code has been reset, remove the battery door to access the reset pin hole. Take the reset pin and insert it into the hole. You should feel a slight resistance as you push the pin in. Push the pin in all the way until it clicks into place.

Once the reset pin is inserted, the lock will beep twice to indicate that the code has been reset. Remove the reset pin and reinsert the battery door to secure the lock.

The lock will now be in the default factory settings. You can now program the lock with a new code using the instructions in the user manual.

Reset Complete

Once you have followed the steps outlined above, the reset process will be complete. The lock will now be in factory default settings, and all existing user codes will be deleted. You can now proceed to create new user codes as per your preference, ensuring the security of your home or office.

Here are some additional tips to keep in mind during the reset process:

Ensure that you have all necessary tools and materials, including a small Phillips head screwdriver and a pair of needle-nose pliers.
Carefully follow each step to avoid any mistakes or damage to the lock.
If you encounter any difficulties during the reset process, refer to the user manual or contact the manufacturer for assistance.
Regularly reset your lock code, especially if you have shared it with others or suspect a security breach. This helps prevent unauthorized access to your property.

Verify New Master Code

Once you have entered the new master code, you need to verify it. To do this, press the Schlage button on the keypad. The lock will beep once and the LED will flash green. Then, enter the new master code again. The lock will beep twice and the LED will flash green again. This confirms that the new master code has been successfully programmed.

Now, you can use the new master code to unlock the door. Simply enter the code on the keypad and press the Schlage button. The lock will beep once and the door will unlock.

To verify that the new master code is working properly, you can try the following steps:

Enter the new master code on the keypad.
The lock will beep once and the LED will flash green.
Enter the new master code again.
The lock will beep twice and the LED will flash green again.
The door will unlock.

If you are able to complete these steps successfully, then the new master code is working properly.

Troubleshooting

If you are having trouble verifying the new master code, you can try the following troubleshooting tips:

Make sure that you are entering the new master code correctly.
Make sure that the lock is in programming mode.
Try resetting the lock to factory default settings.

If you are still having trouble, you can contact Schlage customer service for assistance.

How to Reset Code on Schlage Lock

Step 1: Remove the battery cover.

Locate the battery cover on the bottom of the lock and remove it by pressing the tab and sliding the cover down.

Step 2: Remove the batteries.

Once the battery cover is removed, take out the batteries. This will reset the lock to factory settings.

Step 3: Reinstall the batteries.

After a few seconds, put the batteries back into the lock. Make sure the positive (+) and negative (-) terminals are aligned correctly.

Step 4: Replace the battery cover.

Slide the battery cover back into place and press the tab to secure it.

Step 5: Reprogram the lock.

Follow the instructions in the Schlage lock user manual to program a new code for the lock.

Note: Resetting the lock will erase all the existing codes.