Baking Soda and Salt: Create a paste by mixing 3 tablespoons of baking soda with 2 tablespoons of fine salt and 1/4 cup of water. Apply the paste to the oxidized areas using a soft cloth, rubbing gently. Let it sit for 10-15 minutes before rinsing with water and drying.
| Home Remedy |
Ingredients |
Method |
| Lemon Juice and Salt |
Lemon juice, fine salt |
Mix equal parts, apply on copper, scrub, rinse |
| White Vinegar |
White vinegar, salt |
Create solution, soak copper, brush away oxidation, rinse |
| Ketchup or Tomato Paste |
Ketchup or tomato paste |
Apply thick layer, let sit, scrub away, rinse |
| Baking Soda and Salt |
Baking soda, fine salt, water |
Mix paste, apply on copper, let sit, scrub, rinse |
Chemical Solutions for Severe Oxidation
Phosphoric Acid and Muriatic Acid
Phosphoric acid and muriatic acid are both powerful acids that can effectively remove heavy oxidation. However, they should only be used on thick copper objects, as they can damage thinner ones. To use these acids, follow these steps:
- Wear rubber gloves and eye protection.
- Dilute the acid in a 1:1 ratio with water.
- Apply the diluted acid to the copper using a brush or cotton swab.
- Allow the acid to sit for 10-15 minutes, then rinse it off thoroughly with water.
- Repeat steps 3 and 4 as necessary until the oxidation is removed.
Caution: Do not mix phosphoric acid and muriatic acid together, as this can create toxic fumes.
Citric Acid
Citric acid is a milder acid that can be used to remove light to moderate oxidation. It is safe to use on most copper objects, but it may not be as effective as stronger acids on severe oxidation.
Electrochemical Cleaning
Electrochemical cleaning is a process that uses electricity to remove oxidation from copper. This method is particularly effective for removing heavy oxidation from large or intricate objects. To perform electrochemical cleaning, you will need the following equipment:
| Item |
Description |
| Electrolyte solution |
A solution that conducts electricity, such as vinegar or salt water. |
| Anodes |
Pieces of metal that connect to the positive terminal of a battery. |
| Cathodes |
Pieces of metal that connect to the negative terminal of a battery. |
| Battery charger |
A device that provides a source of electricity. |
To perform electrochemical cleaning, follow these steps:
- Fill a container with the electrolyte solution.
- Connect the anodes to the positive terminal of the battery charger and the cathodes to the negative terminal.
- Place the copper object in the solution between the anodes and cathodes.
- Turn on the battery charger and allow the current to flow through the solution for 30-60 minutes.
- Remove the copper object from the solution and rinse it thoroughly with water.
Abrasive Techniques for Stubborn Stains
When more gentle methods fail, abrasive techniques may be necessary to remove stubborn oxidized stains from copper. Steel wool, with its fine abrasive fibers, is an effective and readily available option. However, it’s important to use the finest grade possible (e.g., 0000) to minimize scratching. Rub the steel wool gently in the direction of the grain to avoid damaging the surface. Similarly, a fine-grit sanding sponge can be used to remove stubborn stains and smooth out rough surfaces. Always use the finest grit (e.g., 220-320) and sand with the grain.
For heavily oxidized or deeply embedded stains, chemical abrasives may be necessary. These products, such as Brasso or Bar Keepers Friend, contain mild abrasives suspended in a cleaning solution. Apply the abrasive with a soft cloth or sponge, and rub gently in small circular motions. Take care to avoid prolonged contact and test the product on an inconspicuous area to ensure it does not damage the copper.
In extreme cases, a wire brush can be used to remove thick or stubborn oxidation. However, this method should be used with great caution as it can easily scratch or damage the copper surface. Use a fine-bristled wire brush and work gently with the grain. Always test the brush on a scrap piece of copper to ensure it does not cause damage.
Cautionary Tips for Abrasive Techniques:
| Abrasive |
Caution |
| Steel Wool |
Use finest grade (0000) and rub in direction of grain. |
| Sanding Sponge |
Use finest grit (220-320) and sand with the grain. |
| Chemical Abrasives |
Test on inconspicuous area first, avoid prolonged contact. |
| Wire Brush |
Use fine-bristled brush, work gently with the grain, test on scrap piece. |
Post-Cleaning Care and Protection
Once you have successfully cleaned your oxidized copper, it is crucial to take proper care and protective measures to maintain its pristine condition.
Drying and Polishing
After cleaning, thoroughly dry the copper item using a soft, clean cloth to prevent water stains. You can gently polish it with a non-abrasive polish or cloth to restore its shine.
Applying a Protective Coat
To protect the copper from further oxidation, consider applying a clear protective coat such as a lacquer, varnish, or wax. This will create a barrier against moisture and air, which are the main causes of oxidation.
Handling and Storage
Handle cleaned copper items with care to avoid scratching or damaging the surface. Store them in a dry, protected area away from direct sunlight or excessive humidity to minimize oxidation.
Regular Maintenance
Regularly inspect your copper items for signs of oxidation. If minor oxidation occurs, use a mild vinegar solution or a commercial copper cleaning product to clean it. Avoid using harsh chemicals or abrasive cleaners as they can damage the copper.
Table of Protective Measures
| Measure |
Description |
| Applying a clear protective coat |
Creates a barrier against moisture and air |
| Storing in a dry, protected area |
Minimizes exposure to oxidation-causing factors |
| Regular inspection and maintenance |
Allows for early detection and treatment of oxidation |
Additional Tips
For heavily oxidized copper items, consider professional restoration services to ensure proper cleaning and protection.
Materials You’ll Need:
1. White vinegar
2. Salt
3. Lemon juice
4. Baking soda
5. Ketchup
6. Toothpaste
7. Commercial copper cleaner
Best Practices for Maintaining Copper’s Shine
8. Regular Cleaning and Maintenance
To keep your copper looking its best, regular cleaning and maintenance are essential. Here are some tips:
– Wash copper items with warm, soapy water and a soft cloth. Avoid using harsh detergents or abrasive cleaners.
– Avoid exposing copper to excessive moisture or heat, as these can cause oxidation.
– If copper becomes tarnished or oxidized, clean it immediately to prevent further damage.
– Apply a thin layer of wax or lacquer to the copper surface to protect it from oxidation.
By following these practices, you can keep your copper items looking beautiful and shiny for years to come.
Common Mistakes to Avoid When Cleaning Copper
Cleaning oxidized copper requires careful attention to avoid damaging its delicate surface. Here are some common mistakes to steer clear of:
9. Using Abrasive Cleaners or Harsh Chemicals
Employing abrasive cleaners like steel wool, sandpaper, ammonia, or bleach can irreparably scratch or pit the copper’s surface. These substances are too aggressive and should be avoided at all costs. Instead, opt for gentle and pH-neutral cleaning agents specifically designed for copper.
| Abrasive Cleaners |
Harmless Cleaners |
| Steel wool |
Copper polish |
| Sandpaper |
Mild soap |
| Ammonia |
Baking soda |
| Bleach |
Vinegar |
Tips for Restoring Antique Copper
Restoring oxidized copper to its former glory requires a delicate approach. Follow these tips to effectively clean and revitalize your antique copper treasures.
1. Identify the Type of Oxidation
Copper oxidizes in different ways, forming various types of patina:
| Patina Type |
Appearance |
| Red |
Bright, reddish-brown |
| Green |
Verdigris, a bluish-green |
| Brown |
Chocolate-colored, caused by sulfur |
| Black |
Heavy oxidation, often found on outdoor copper |
2. Use Mild Cleaners
Harsh cleaners can damage the copper. Instead, opt for gentle options like:
- Distilled white vinegar
- Lemon juice
- Baking soda
- Commercial copper cleaning solutions
3. Create a Cleaning Paste
For stubborn oxidation, create a paste using your chosen cleaner and water or baking soda. Apply it to the copper and let it sit for several minutes.
4. Scrub Gently
Use a soft brush or sponge to gently scrub away the loosened oxidation. Avoid using abrasive materials that can scratch the copper.
5. Rinse Thoroughly
Rinse the copper with plenty of clean water to remove any remaining cleaner or oxidation.
6. Dry Completely
Use a clean, soft cloth to pat the copper dry. Avoid leaving any moisture on the surface, as it can lead to further oxidation.
7. Protect the Copper
To prevent future oxidation, apply a protective coating such as wax, oil, or lacquer.
8. Avoid Over-Cleaning
Over-cleaning can remove the protective patina and damage the copper. Only clean as often as necessary.
9. Test First
Always test your cleaning method in an inconspicuous area first to ensure it doesn’t harm the copper.
10. Seek Professional Help for Valuables
If you’re dealing with a highly valuable or antique copper piece, consider consulting a professional conservator. They have the expertise to restore your copper safely and effectively.
How To Clean Oxidized Copper
Copper is a beautiful metal that is often used in jewelry, cookware, and other decorative items. However, over time, copper can oxidize and turn a dull brown or green color. This oxidation is caused by a reaction between the copper and oxygen in the air. While oxidized copper is not harmful, it can be unsightly and may diminish the value of your copper items.
There are a few different ways to clean oxidized copper. One method is to use a commercial copper cleaner. These cleaners are typically made with a mild acid, such as vinegar or lemon juice, which helps to dissolve the oxidation. Another method is to use a homemade cleaning solution. There are several different recipes for homemade copper cleaners, but one common recipe is to mix equal parts vinegar and salt. Apply the cleaning solution to the oxidized copper and let it sit for a few minutes. Then, use a soft cloth to rub away the oxidation. Rinse the copper item with water and dry it thoroughly.
If the oxidation is severe, you may need to use a more abrasive cleaning method. One option is to use a metal polish. Metal polishes are typically made with a fine abrasive, such as pumice or diatomaceous earth, which helps to remove the oxidation. Another option is to use a wire brush. Wire brushes are effective at removing oxidation, but they can also scratch the copper surface. Therefore, it is important to use a wire brush with care.
People Also Ask About How To Clean Oxidized Copper
How do you clean oxidized copper pennies?
To clean oxidized copper pennies, you can use a commercial copper cleaner or a homemade cleaning solution. One common recipe for a homemade copper cleaner is to mix equal parts vinegar and salt. Apply the cleaning solution to the oxidized pennies and let it sit for a few minutes. Then, use a soft cloth to rub away the oxidation. Rinse the pennies with water and dry them thoroughly.
How do you clean oxidized copper jewelry?
To clean oxidized copper jewelry, you can use a commercial copper cleaner or a homemade cleaning solution. One common recipe for a homemade copper cleaner is to mix equal parts vinegar and salt. Apply the cleaning solution to the oxidized jewelry and let it sit for a few minutes. Then, use a soft cloth to rub away the oxidation. Rinse the jewelry with water and dry it thoroughly.
How do you clean oxidized copper cookware?
To clean oxidized copper cookware, you can use a commercial copper cleaner or a homemade cleaning solution. One common recipe for a homemade copper cleaner is to mix equal parts vinegar and salt. Apply the cleaning solution to the oxidized cookware and let it sit for a few minutes. Then, use a soft cloth to rub away the oxidation. Rinse the cookware with water and dry it thoroughly.
