Have you lost the key to your Sentry Safe and are unsure how to open it? Don’t worry, you’re not alone. Many people find themselves in this situation, but there are a few simple steps you can take to open your safe without damaging it.
First, you’ll need to gather a few tools. You’ll need a small screwdriver, a hammer, and a pair of needle-nose pliers. Once you have your tools, you can begin the process of opening your safe. Start by removing the screws from the back of the safe. Once the screws are removed, you can carefully pry the back of the safe off. Be careful not to damage the safe or its contents. Once the back of the safe is removed, you’ll need to locate the combination lock. The combination lock is usually located on the front of the safe. Once you’ve located the combination lock, you’ll need to use the screwdriver to remove the screws that hold it in place. Once the screws are removed, you can carefully remove the combination lock.
Now that you have the combination lock removed, you’ll need to reset it. To reset the combination lock, you’ll need to use the hammer and the needle-nose pliers. First, use the hammer to knock out the pins in the combination lock. Once the pins are knocked out, you can use the needle-nose pliers to remove them. Once the pins are removed, you can reassemble the combination lock and set a new combination. Once you’ve set a new combination, you can reattach the combination lock to the safe and replace the back of the safe.
Additional Methods for Opening a Sentry Safe
1. Resetting the Combination Using the Override Key
If you have lost the combination or it’s not working, you can reset it using the override key. Locate the override keyhole on the back or bottom of the safe. Insert the key and turn it clockwise to unlock the safe. Once the safe is open, change the combination according to the manufacturer’s instructions.
2. Drilling a Hole
If you don’t have the override key, you can drill a hole into the safe. This method is more destructive but may be necessary as a last resort. Use a 1/4-inch drill bit to drill a hole in the center of the dial. Once the hole is drilled, you can use a long, thin object to push the lock mechanism into the open position.
3. Using a Magnesia Pick
A magnesia pick is a tool that can be used to unlock combination locks. The pick is inserted into the lock and manipulated to align the tumblers into the open position. This method requires some skill and practice, but it can be effective with the right technique.
4. Grinding the Dial
If the lock is damaged or the tumblers are misaligned, you can grind down the dial using a power tool. This will expose the lock mechanism, allowing you to manipulate it and open the safe. However, be careful not to damage the safe itself during the process.
5. Using a Hacksaw
As a last resort, you can cut through the safe’s door using a hacksaw. This method is destructive and will likely damage the safe permanently. However, it may be necessary if all other methods have failed.
6. Contacting a Locksmith
If you’re unable to open the safe using any of the above methods, it’s best to contact a qualified locksmith. A professional locksmith will have the tools and expertise to open the safe without damaging it.
| Method |
Difficulty |
Damage Risk |
Effectiveness |
| Override Key |
Easy |
Low |
High |
| Drilling Hole |
Moderate |
Medium |
Moderate |
| Magnesia Pick |
Difficult |
Low |
Moderate |
| Grinding Dial |
Difficult |
Medium |
Moderate |
| Using Hacksaw |
Difficult |
High |
High |
| Contacting Locksmith |
Easy |
Low |
High |
How To Open Sentry Safe With Combination
Sentry safes are known for their durability and security. However, if you’ve forgotten the combination to your safe, you may be wondering how to open it. There are a few different ways to open a Sentry safe with combination, and the method you choose will depend on the type of safe you have. Here are the most common methods:
- Use the factory default combination. Sentry safes come with a factory default combination, which is usually 123456. If you’ve never changed the combination, this is the most likely combination to work.
- Look for the combination on the safe. Sometimes, the combination is written on the safe itself, either on the back or on the bottom. If you’re lucky, you may be able to find the combination this way.
- Contact Sentry customer service. If you can’t open the safe using the factory default combination or by looking for the combination on the safe, you can contact Sentry customer service. They will be able to help you reset the combination or open the safe for you.
People Also Ask About How To Open Sentry Safe With Combination
How do I reset the combination on my Sentry safe?
To reset the combination on your Sentry safe, you will need to contact Sentry customer service. They will be able to provide you with the instructions on how to reset the combination.
What do I do if I forget the combination to my Sentry safe?
If you forget the combination to your Sentry safe, you can contact Sentry customer service. They will be able to help you reset the combination or open the safe for you.
How do I open a Sentry safe without the combination?
There are a few ways to open a Sentry safe without the combination. However, these methods are not recommended, as they may damage the safe or its contents. If you are unable to open the safe using the combination, it is best to contact Sentry customer service.
