Tag: how-to-charge

When your NOCO Boost Plus GB40 portable jump starter runs out of power, you’ll need to recharge it as soon as possible to ensure it’s ready for use when you need it most. The GB40 can be recharged using either a 12-volt DC power source or a 110-volt AC power source. In this article, I will explain both methods in detail, so you can get your GB40 back up and running in no time. The NOCO Boost Plus GB40 is a powerful portable jump starter that can be used to jump-start cars, trucks, and other vehicles. It is also a great source of power. You can use it to power other devices and also use it to recharge your devices.

To charge the GB40 using a 12-volt DC power source, you will need a 12-volt DC power adapter. The power adapter should have a cigarette lighter plug on one end and a barrel connector on the other end. The barrel connector should be the same size as the input port on the GB40. Once you have the power adapter, simply plug the cigarette lighter plug into the 12-volt power outlet in your vehicle and the barrel connector into the input port on the GB40. The GB40 will begin charging immediately. It will take approximately 3 hours to fully charge the GB40 using a 12-volt DC power source.

To charge the GB40 using a 110-volt AC power source, you will need a 110-volt AC power adapter. The power adapter should have a standard 3-prong plug on one end and a barrel connector on the other end. The barrel connector should be the same size as the input port on the GB40. Once you have the power adapter, simply plug the standard 3-prong plug into a 110-volt AC power outlet and the barrel connector into the input port on the GB40. The GB40 will begin charging immediately. It will take approximately 6 hours to fully charge the GB40 using a 110-volt AC power source.

Powering Up the Noco Boost Plus GB40: Essential Steps

1. Preparation: Essential Guidelines for Safe and Effective Power Connection

Before connecting your Noco Boost Plus GB40 to a power source, it’s imperative to adhere to these safety precautions to ensure optimal performance and longevity of your device:

• Verify Voltage Compatibility: Confirm that your power outlet voltage matches the specification of the Noco Boost Plus GB40 (120V AC). Attempting to connect it to an incompatible voltage can damage the device.

• Ensure Proper Ventilation: Avoid placing the Noco Boost Plus GB40 in confined or poorly ventilated areas during charging. Heat dissipation is crucial, and obstructed ventilation can result in overheating and potential damage.

• Ground the Battery: If applicable, connect the negative terminal clamp to a grounded metal surface on the vehicle you intend to jump-start. This grounding step helps dissipate static electricity, minimizing potential shocks or sparks.

• Wear Protective Gear: As a safety measure, donning safety glasses and gloves is recommended when handling the Noco Boost Plus GB40, especially when jump-starting a vehicle. These protective gear shield you from potential sparks or chemical spills.

• Secure Connections: Ensure that both the positive and negative clamps are securely fastened to the corresponding terminals on the vehicle’s battery. Loose connections can impede proper charging or jump-starting.

2. Connecting to Power Source: Step-by-Step Instructions

Once the safety precautions are met, follow these steps to connect the Noco Boost Plus GB40 to a power outlet:

1. Insert AC Adapter: Plug the provided AC adapter into the designated input port on the Noco Boost Plus GB40.
2. Connect to Outlet: Insert the other end of the AC adapter into a compatible power outlet (120V AC).
3. Monitor Charging Status: The Noco Boost Plus GB40 will display its charging status through an LED indicator or a digital display, depending on the model. Refer to the user manual for specific details on how to interpret the charging indicators.

3. Charging Time: Understanding the Charging Process

The charging time for your Noco Boost Plus GB40 can vary depending on the following factors:

• Capacity of the Built-In Battery: The larger the battery capacity, the longer the charging time.
• Input Power Source: A higher wattage power outlet will charge the Noco Boost Plus GB40 faster than a lower wattage source.
• Ambient Temperature: Charging in colder temperatures may slow down the charging process.

Refer to the table below for approximate charging times based on different power sources:

Plugging into a Wall Outlet: The Direct Approach

The NOCO Boost Plus GB40 can be charged directly from a standard wall outlet using the included AC adapter. This is the most straightforward and convenient method for charging the device, as it does not require any additional equipment or adapters.

Step-by-Step Instructions for Plugging into a Wall Outlet:

1. Connect the AC adapter to the NOCO Boost Plus GB40.
2. Plug the AC adapter into a standard wall outlet.
3. The LED indicator on the NOCO Boost Plus GB40 will turn on to indicate that it is charging.
4. The charging time will vary depending on the remaining battery level of the NOCO Boost Plus GB40. It typically takes around 3-4 hours to fully charge the device from a depleted state.

Additional Tips:

• Ensure that the wall outlet is providing adequate power.
• Avoid charging the NOCO Boost Plus GB40 in extremely hot or cold environments.
• Disconnect the device from the wall outlet once it is fully charged.

Connecting to a USB Power Source: On the Go Charging

The NOCO Boost Plus GB40 can be charged on the go using a USB power source. This is a convenient way to keep your jump starter powered up while you’re on the road. To charge your GB40 using a USB power source, you will need a USB-C cable.

To connect your GB40 to a USB power source, follow these steps:

1. Connect the USB-C cable to the USB-C port on the GB40.
2. Connect the other end of the USB-C cable to a USB power source, such as a computer, laptop, or wall charger.
3. The GB40 will begin charging. The charging status will be indicated by the LED lights on the front of the GB40.

The GB40 can be charged from a USB power source with a power output of 5V/2A or higher. The charging time will vary depending on the power output of the USB power source.

Here is a table summarizing the charging times for the GB40 when using different USB power sources:

Maximizing Solar Energy: Charging via Sunlight

The NOCO Boost Plus GB40 can harness the power of the sun to recharge its internal battery, providing a convenient and eco-friendly charging option. To optimize solar charging, follow these steps:

1. Position for Maximum Sun Exposure:

Select an open area where the GB40 can receive direct sunlight for extended periods. Face the solar panel towards the sun to maximize energy absorption.

2. Charge in Adequate Sunlight:

The GB40 requires a minimum of 10,000 Lux of sunlight to initiate solar charging. Check the weather forecast or use a light meter to ensure sufficient sunlight intensity.

3. Orient Solar Panel Optimally:

For optimal solar energy conversion, adjust the GB40’s solar panel at a 90-degree angle to the sun’s rays. This ensures that the panel receives the maximum amount of direct sunlight.

4. Maintain Clean Solar Panel:

Dirt and debris can obstruct sunlight from reaching the solar panel, reducing charging efficiency. Clean the panel regularly with a soft cloth to ensure unobstructed light transmission. Consider using a brush or compressed air to remove stubborn dirt.

Utilizing a 12V Vehicle Outlet: Powering Up on the Road

When you’re far from a power source, a 12V vehicle outlet can be your lifeline for recharging your NOXO Boost Plus GB40. Here’s how to do it:

1. Connect the NOXO to the 12V Outlet: Plug the included 12V car charger into the vehicle’s 12V outlet.
2. Attach the NOXO to the Charger: Connect the other end of the car charger to the NOXO’s charging port.
3. Start the Vehicle: Turn on the vehicle’s engine to provide power to the 12V outlet.
4. Check the Charging Indicator: The NOXO will display a charging indicator light to indicate that it’s receiving power.
5. Monitor Charging Time: Refer to the table below for approximate charging times based on the NOXO’s current battery level:

Current Battery Level	Approximate Charging Time
25% or less	1-2 hours
50% or less	1-1.5 hours
75% or less	0.5-1 hour
90% or less	0.25-0.5 hours

6. Unplug and Go: Once the NOXO is fully charged, unplug it from the car charger and you’re ready to power up your devices.

Monitoring Charging Progress: Keeping Track of Battery Life

To monitor the charging progress of your NOCO Boost Plus GB40, simply press the power button. The device will display a series of LED lights to indicate the battery level:

LED Indicator	Battery Level
1 LED	<25%
2 LEDs	25-50%
3 LEDs	50-75%
4 LEDs	75-100%

The device will also display a percentage indicator on the LCD screen, providing a more precise estimate of the battery level.

6. Troubleshooting Common Charging Issues

If you are experiencing issues charging your NOCO Boost Plus GB40, try the following troubleshooting tips:

• Ensure that the charging cable is securely connected to both the device and the power source.
• Verify that the power outlet is functioning properly.
• Check if the device’s battery is completely discharged. If so, it may take several hours for it to start charging.
• Try using an alternative charging cable or power source.
• If the battery is not charging after trying the above steps, contact NOCO customer support for assistance.

To prevent common charging issues, it is recommended to follow these best practices:

• Use the original NOCO charging cable and power source.
• Do not fully discharge the battery before charging.
• Charge the device in a cool, dry environment.
• Avoid exposing the device to extreme temperatures.

Charging Procedure for Noco Boost Plus GB40

To charge the Noco Boost Plus GB40:

1. Connect the GB40 to an AC power outlet using the included charging adapter.
2. The charging indicator will illuminate, indicating the charging process has started.
3. Charging time varies depending on the power source and battery level, typically taking 2-3 hours.
4. Once fully charged, the charging indicator will turn green.
5. Unplug the GB40 from the power outlet and it’s ready for use.

Troubleshooting Charging Hiccups: Addressing Common Issues

1. No Charging Indicator

Ensure the AC power outlet is working and the charging adapter is properly connected to both the GB40 and the power outlet.

2. Slow Charging

Try using a different AC power outlet or a different power source (e.g., a laptop or solar panel).

3. Charging Intermittent

Check the charging cable and charging adapter for any damage or loose connections.

4. Overheating

Unplug the GB40 from the power outlet and allow it to cool down. If overheating persists, contact Noco support.

5. Battery not Holding Charge

The battery may need to be replaced. Contact Noco support for battery replacement options.

6. Other Issues

Refer to the GB40 user manual or contact Noco support for further assistance.

7. Advanced Troubleshooting Table

Issue	Possible Causes	Solutions
Charging restarts repeatedly	Unstable power source	Try using a different AC power outlet or power source
Charging stops before reaching 100%	Battery issues	Contact Noco support for battery replacement
GB40 not recognizing the charger	Faulty charging cable or adapter	Replace the charging cable or adapter

Maintaining Battery Health: Tips for Long-Lasting Performance

1. Avoid Extreme Temperatures

Extreme cold or heat can damage the battery’s internal components. Keep the GB40 within the recommended temperature range of 32°F (0°C) to 104°F (40°C).

2. Charge Regularly

Even when not in use, the GB40’s battery self-discharges at a slow rate. To maintain optimal battery health, charge it every 3-6 months using the provided charger.

3. Store Properly

When not in use, store the GB40 in a cool, dry place with a moderate temperature. Avoid leaving it in the car, where it could be exposed to extreme temperatures.

4. Avoid Deep Discharge

Letting the GB40’s battery drain completely can significantly shorten its lifespan. If the power level reaches below 20%, recharge it promptly.

5. Use the Correct Charger

Only use the provided charger or a compatible high-quality charger. Using an incorrect charger can damage the battery.

6. Clean the Terminals

Over time, corrosion can build up on the GB40’s terminals. To ensure proper connections, clean the terminals periodically with a wire brush or sandpaper.

7. Check for Damage

Inspect the GB40 regularly for any signs of damage, such as cracks or leaks. If you suspect damage, discontinue use and contact NO.CO customer support.

8. Lithium-Ion Battery Care and Maintenance

The GB40 uses a lithium-ion battery, which has specific care and maintenance requirements:

• Avoid overcharging: Only charge the GB40 until the indicator light turns green.
• Don’t store fully charged: For long-term storage, discharge the battery to around 50%.
• Balance charging: Regularly charge the GB40 for an extended period (10-12 hours) to improve overall battery health.
• Optimize charging temperature: Charge the GB40 within the recommended temperature range (32°F (0°C) to 104°F (40°C)).
• Calibrate battery: Periodically discharge the GB40 completely, then charge it fully to recalibrate the battery management system.
• Monitor battery health: Use the NO.CO Connect app or an external battery monitor to track the GB40’s battery health and performance.

Safety Precautions: Handling the Noco Boost Plus GB40 Responsibly

Before using the Noco Boost Plus GB40, it’s crucial to prioritize safety. Always adhere to the following guidelines to prevent potential accidents or damage:

1. Inspect Before Use

Thoroughly examine the GB40 for any visible damage or defects. Ensure all cables are intact, and the unit is free of cracks or breaks.

2. Read the Manual

Take the time to carefully read and understand the user manual provided with the GB40. Familiarize yourself with the unit’s functions, safety instructions, and operating procedures.

3. Wear Gloves

When handling the GB40, always wear insulated gloves to protect your hands from electrical shocks or burns.

4. Park Safely

Park your vehicle on a flat, stable surface before connecting the GB40. Engage the parking brake to prevent accidental movement.

5. Disconnect Negatives

Before connecting the GB40 to the vehicle’s battery, disconnect the negative terminal of the battery. This prevents potential short circuits and ensures safety.

6. Connect Properly

Ensure the red clamp of the GB40 is connected to the positive terminal of the vehicle’s battery, and the black clamp is connected to the negative terminal.

7. Avoid Contact

Never touch the positive and negative clamps of the GB40 together or to any metal surfaces. This can create a short circuit and cause severe damage.

8. Start the Vehicle

Once the GB40 is connected, start the vehicle’s engine. If the vehicle does not start, disconnect the GB40 and seek professional assistance.

9. Disconnect Safely

When disconnecting the GB40, always remove the red clamp first, followed by the black clamp. Avoid touching the metal terminals of the unit or the battery.

Safety Feature	Benefit
Insulated Gloves	Protects hands from electrical shocks
Reverse Polarity Protection	Prevents damage if clamps are connected incorrectly
Overcurrent Protection	Prevents damage to the unit and vehicle in case of a short circuit

Additional Charging Options: Exploring Alternative Methods

1. Solar Charging: Harnessing Natural Energy

Harness the sun’s power to charge your NOCO Boost Plus GB40 with solar panels. Connect compatible solar panels to the unit’s DC input port and let the sunlight do its magic. However, charging times may vary depending on the panel’s efficiency and solar conditions.

2. USB-C Power Bank: On-the-Go Convenience

Keep your GB40 powered up while on the move with a portable USB-C power bank. Simply connect the power bank to the unit’s USB-C input port for a convenient and mobile charging solution.

3. Wind Turbine: Embracing Green Energy

Take advantage of natural wind power by connecting a compatible wind turbine to the DC input port. As the turbine spins, it generates electricity to charge your GB40, making this a sustainable and eco-friendly option.

4. Vehicle Battery: Jump-Starting Your Charge

If you have access to a vehicle, you can jump-start the charging process of your GB40 by connecting it to the vehicle’s battery using jumper cables. This method provides a quick and effective way to restore power to your unit.

5. External AC Power Adapter: Wall Socket Charging

For a more traditional charging method, connect an external AC power adapter to the unit’s AC input port. Plug the adapter into a wall socket to charge your GB40 via a conventional power outlet.

6. Inductive Charging Pad: Wireless Convenience

Enjoy the ease of wireless charging by using an inductive charging pad compatible with the GB40. Simply place the unit on the pad and watch as it charges without the hassle of cables.

7. Fuel Cell Charger: Power in Remote Areas

For off-grid situations, consider a fuel cell charger. These chargers generate electricity using a chemical reaction, allowing you to charge your GB40 in remote locations without access to traditional power sources.

8. Thermoelectric Generator: Harvesting Ambient Heat

Harness the power of ambient heat with a thermoelectric generator. This device converts temperature differences into electricity, allowing you to charge your GB40 from the heat generated by your body, the environment, or other sources.

9. Hydraulic Charging System: Utilizing Water Flow

In areas with flowing water, you can explore hydraulic charging systems. These systems use the force of water to generate electricity, which can be used to charge your GB40 in a clean and sustainable manner.

10. Piezoelectric Charging: Converting Mechanical Energy

Transform mechanical energy into electrical energy with a piezoelectric charging system. By applying pressure or vibration to the system’s components, you can generate electricity to charge your GB40, making it a versatile option for unique charging needs.

Alternative Charging Method	Description
Solar Charging	Harnesses solar energy using panels
Wind Turbine	Utilizes wind power

How To Charge Noco Boost Plus Gb40

To charge the NOCO Boost Plus GB40, follow these steps:

1. Connect the charger to a power source, such as a wall outlet or a car’s cigarette lighter.
2. Connect the other end of the charger to the GB40’s charging port.
3. The GB40 will begin charging. The charging indicator lights will flash to indicate the charging progress.
4. Once the GB40 is fully charged, the charging indicator lights will turn solid.

People Also Ask About How To Charge Noco Boost Plus Gb40

How long does it take to charge the NOCO Boost Plus GB40?

The charging time for the NOCO Boost Plus GB40 depends on the power source being used. When using a wall outlet, the charging time is approximately 3 hours. When using a car’s cigarette lighter, the charging time is approximately 6 hours.

Can I use the NOCO Boost Plus GB40 while it is charging?

No, you cannot use the NOCO Boost Plus GB40 while it is charging. This could damage the product.

How do I know when the NOCO Boost Plus GB40 is fully charged?

When the NOCO Boost Plus GB40 is fully charged, the charging indicator lights will turn solid.