guide Archives * Page 30 of 34 * flexco.com

1. How to Obtain the National Dex in Pokémon Platinum

In the captivating world of Pokémon Platinum, the pursuit of the elusive National Pokédex is a coveted goal for every ardent Pokémon enthusiast. This coveted encyclopedia encompasses an awe-inspiring repertoire of Pokémon spanning generations, each possessing unique attributes and extraordinary abilities. To unlock the mysteries of the National Pokédex, intrepid trainers must embark on an arduous journey, navigating treacherous paths and overcoming formidable challenges to complete the arduous task of catching or trading for all 493 Pokémon.

The path to acquiring the National Pokédex requires unwavering dedication and meticulous planning. Trainers must traverse the vast expanse of the Sinnoh region, leaving no stone unturned in their quest to encounter and capture every indigenous Pokémon species. Moreover, they must venture beyond the familiar confines of Sinnoh, embarking on daring expeditions to distant lands, such as the enigmatic Distortion World, where rare and enigmatic Pokémon await discovery. Additionally, trainers can engage in strategic trading with fellow Pokémon enthusiasts, exchanging Pokémon to fill the gaps in their collection and forge invaluable connections.

Upon completion of this momentous undertaking, the National Pokédex will serve as an enduring testament to the trainer’s unwavering dedication and unparalleled expertise. It will not only provide a comprehensive guide to the vast array of Pokémon but also unlock access to exclusive events and tournaments, granting trainers the opportunity to showcase their hard-earned collection and engage in thrilling battles against formidable opponents. The National Pokédex is the ultimate accolade for any aspiring Pokémon Master, a symbol of profound knowledge and unwavering determination.

How To Get National Dex In Platinum

To get the National Dex in Pokémon Platinum, you must first complete the Sinnoh Pokédex by catching, trading, or evolving all 150 Pokémon found in the Sinnoh region. Once you have completed the Sinnoh Pokédex, talk to Professor Oak in Sandgem Town. He will give you the National Dex, which will allow you to catch and trade all 493 Pokémon in the game.

Here are some tips for completing the Sinnoh Pokédex:

Talk to every NPC in the game. Many of them will give you Pokémon or tell you where to find them.
Explore every area of the game. Some Pokémon can only be found in certain locations, such as the Safari Zone or the Underground.
Trade with other players. This is the best way to get Pokémon that you can’t find in your own game.
Use the GTS. The GTS is a global trading system that allows you to trade Pokémon with players from all over the world.

5 Ways to Obtain Avada Kedavra Early in Hogwarts Legacy

Unveiling the Secrets of Avada Kedavra: A Guide to Early Acquisition in Hogwarts Legacy

Prepare to delve into the enigmatic realm of forbidden magic as we unravel the secrets of obtaining the coveted Avada Kedavra spell in Hogwarts Legacy. This legendary dark art, capable of ending a life with a single incantation, has long been shrouded in mystery. However, through a series of clandestine encounters and enigmatic puzzles, it is possible to unlock the sinister power of Avada Kedavra long before its intended release. Embark on a perilous journey through the hallowed halls of Hogwarts, where hidden chambers and ancient artifacts await those intrepid enough to seek them out.

Unveiling the ethereal glow that guides your path, the Floo Flames serve as portals to hidden chambers concealed within the castle’s depths. Seek out the secluded chambers, adorned with arcane symbols and enigmatic books, and prepare to engage in mind-bending puzzles that test your wit and determination. With each puzzle solved, a piece of the coveted incantation will be revealed, bringing you closer to mastering the power of Avada Kedavra. The path is fraught with perils, and only the most skilled and cunning will prevail. As you venture deeper into the labyrinthine castle, rumors of an ancient artifact, whispered to hold the key to ultimate power, reach your ears.

Unlocking the Forbidden Curse

Avada Kedavra is one of the most powerful and unforgivable curses in the wizarding world. In Hogwarts Legacy, players can obtain this forbidden spell through a secret questline. Here’s a detailed guide on how to unlock the Avada Kedavra curse:

1. **Seek the Secrets of Black Magic:** To begin the questline, players must first progress through the main story until they reach the quest “In the Shadow of the Undercroft.” During this quest, players will encounter a secret room beneath Hogwarts containing forbidden books on dark magic. Interacting with these books will initiate the quest to unlock Avada Kedavra.

2. **Acquire the Forbidden Knowledge:** The questline will guide players to various locations throughout the castle, where they must solve puzzles and overcome challenges to unlock the secrets of dark magic. These challenges include defeating powerful enemies, deciphering ancient runes, and mastering forbidden spells.

The following table outlines the key steps and locations involved in acquiring the Forbidden Knowledge:

Step	Location
Solve the Ravenclaw Puzzle	Ravenclaw Tower
Defeat the Dementors	Azkaban Prison
Master the Cruciatus Curse	Forbidden Forest
Retrieve the Ancient Amulet	Tomb of Salazar Slytherin

3. **Confront the Shadow:** Once players have acquired the Forbidden Knowledge, they must confront the Shadow, a powerful entity that guards the secrets of dark magic. The encounter with the Shadow requires players to cast the three Unforgivable Curses (Avada Kedavra, Crucio, and Imperio) in succession. Successfully casting all three curses will grant players access to the Avada Kedavra spell.

Unrestricted Access with Cheats

To unlock Avada Kedavra early in Hogwarts Legacy using cheats, you will need to follow these steps:

1. Download the Cheat Engine software.

2. Launch Cheat Engine and select the “Hogwarts Legacy” process.

3. Go to the “Memory View” tab in Cheat Engine and search for the following values:

Table title: Cheat Engine Values

Value	Description
0x0053B51C	Unlocks Avada Kedavra
0x0053B51D	Sets the spell’s level to 1

4. Double-click on the “Value” column for each row and change it to the corresponding value from the table.

5. Once you have modified the values, click on the “Apply” button.

6. You can now cast Avada Kedavra by equipping it from the Spell menu.

Modding Your Way to Avada Kedavra

Unlocking the forbidden Avada Kedavra curse early in Hogwarts Legacy requires modding the game. Follow these steps:

Download a Mod Manager: Use a mod manager like Nexus Mod Manager to install and manage mods.
Find the “unmodded.ini” File: Located in the game’s installation directory (usually “Hogwarts Legacy/Phoenix/Content/Paks/~mods”).
Edit the File: Open “unmodded.ini” with a text editor and add the following line:
```
Spell_Forbidden_List=""
```
Unlock Avada Kedavra: With the modified “unmodded.ini” file, you can now learn Avada Kedavra from an in-game vendor.

Detailed Explanation of Step 4: Unlocking Avada Kedavra

Once you have edited the “unmodded.ini” file, you can acquire Avada Kedavra early in the game by following these steps:

Vendor	Location
Madam Kogawa	Hogsmeade, The Magic Neep

Visit the Vendor: Go to the specified vendor during business hours.
Speak to the Vendor: Interact with the vendor and select the “I’m interested in learning a few spells” dialogue option.
Purchase Avada Kedavra: Find Avada Kedavra in the spell list and purchase it with gold.

Note: Using Avada Kedavra may have moral implications and can affect certain gameplay elements.

Glitching into Forbidden Power

Acquiring the infamous Avada Kedavra curse before its intended time in Hogwarts Legacy requires exploiting a specific glitch. By following these steps, you can unlock the spell early and unleash its devastating power:

1. Secure a Broomstick

Obtain a broomstick to execute the glitch effectively.

2. Find the Cliff Edge

Locate a cliff edge within the game world. The Forbidden Forest’s western edge offers a suitable spot.

3. Approach the Abyss

Carefully position your character near the precipice, ensuring one foot hovers over the edge.

4. Fall into the Void

Take the plunge by falling off the cliff. Upon hitting the ground, you may experience a loading screen.

5. Respawn and Loot

Once the loading screen concludes, you should find yourself respawned at Hogwarts. Check your inventory, where you will now possess the Avada Kedavra spell. This trick grants you access to the curse much earlier than its standard acquisition point in the story.

Step	Action
1	Secure a Broomstick
2	Find the Cliff Edge
3	Approach the Abyss
4	Fall into the Void
5	Respawn and Loot

Unlocking Hidden Spells

Within the hallowed halls of Hogwarts Legacy, concealed spells lie in wait for those who seek arcane power. One such spell, the infamous Avada Kedavra, can be acquired through a tantalizing questline that tests your morality and resolve.

Hidden Spells and Intriguing Quests

Throughout the vast castle grounds, mysterious quests beckon you to uncover forgotten secrets and master forbidden magic. These quests often involve deciphering ancient runes, solving ingenious puzzles, and forging alliances with enigmatic characters.

The Shadow of Avada Kedavra

Among the hidden spells, Avada Kedavra stands alone as the most feared and lethal. Its acquisition is not for the faint of heart. As you progress through the questline, you will be confronted with moral dilemmas and forced to weigh the consequences of your actions. The path to Avada Kedavra is one of darkness, temptation, and ultimate power.

A Table of Secrets

The quest for Avada Kedavra requires you to complete several key tasks.

Quest Task
Acquire the Unforgivable Curses Book
Locate the Shadow of Death
Confront the Dark Lord

The Shadow of Death Revealed

The most challenging aspect of the quest is finding the Shadow of Death. This enigmatic figure holds the key to unlocking Avada Kedavra. Beware, though, for their motives remain shrouded in mystery, and their intentions may not align with your own.

Confronting the Dark Lord

The culmination of the questline leads to an epic confrontation with the Dark Lord himself. The choices you make in this battle will shape the fate of the wizarding world and determine whether you embrace the darkness or wield the power of Avada Kedavra for a noble cause.

How To Get Avada Kedavra Hogwarts Legacy Early

Avada Kedavra is one of the most powerful spells in the Harry Potter universe, and it’s also one of the most difficult to obtain in Hogwarts Legacy. However, there is a way to get it early on, if you’re willing to put in a little extra work.

To get Avada Kedavra early, you’ll need to complete the “In the Shadow of the Study” quest. This quest is available after you’ve completed the “Secrets of the Restricted Section” quest, and it will take you to the Headmaster’s office. Once you’re in the Headmaster’s office, talk to Professor Fig and he will give you the quest.

The “In the Shadow of the Study” quest is a bit tricky, but it’s not too difficult if you have the right spells. You’ll need to use the Lumos spell to light up the dark areas of the office, and the Revelio spell to reveal hidden objects. You’ll also need to use the Accio spell to move objects out of your way.

Once you’ve completed the “In the Shadow of the Study” quest, you’ll be rewarded with the Avada Kedavra spell. This spell is incredibly powerful, but it can also be very dangerous. Be sure to use it responsibly.

5 Ways To Build A Large Chest In Minecraft

In the realm of Minecraft, where creativity knows no bounds, players have devised a plethora of ingenious ways to enhance their gameplay experience. Among these is the art of crafting large chests, a coveted treasure that offers ample storage capacity. Whether you’re an avid collector or simply seeking a more organized way to store your hard-earned loot, this guide will unveil the secrets to creating this colossal storage solution.

Before embarking on this chest-making adventure, it’s essential to gather the necessary materials. You’ll need wood planks, which can be obtained by chopping down trees with an axe. The number of planks required will depend on the size of the chest you desire. For a large chest, you’ll need a minimum of 8 planks, but for a truly spacious storage solution, consider gathering 16 planks. Additionally, you’ll need a crafting table, which serves as the workbench for all your in-game crafting endeavors.

With your materials in hand, it’s time to transform those humble wood planks into a majestic chest. Open your crafting table and arrange the planks in a specific pattern. For a large chest, place the planks in three rows of three, ensuring that there’s a space in the center of the crafting grid. Once the planks are in place, you’ll witness the magic as the chest takes shape within the crafting window. Click on the newly crafted chest and drag it into your inventory, marveling at the ample storage space it offers. Now, get ready to embark on countless adventures, secure in the knowledge that your precious belongings are safely stashed away in your colossal chest.

How to Make a Large Chest in Minecraft

In this guide, we’ll show you how to expand your storage capabilities by crafting a massive chest in Minecraft. This enhanced chest offers a lot more space to store your precious items and cuts down on the need for multiple, smaller chests.

Crafting the Large Chest

To craft a large chest, you’ll need:

8 Wooden Planks (any type of wood)
1 Trapped Chest

Creating Wooden Planks

If you don’t have any wooden planks, you can collect wood from trees and convert them into planks using a crafting table.

Acquiring a Trapped Chest

Trapped chests are a special type of chest that, when opened, trigger a redstone signal. You can find trapped chests in jungle temples, woodland mansions, or by crafting them using 8 oak planks and 1 tripwire hook.

Assembling the Large Chest

At a crafting table, place the trapped chest in the center slot. Then, surround it with the 8 wooden planks, as shown in the following pattern:

[Plank] [Plank] [Plank]
[Plank] [Trapped Chest] [Plank]
[Plank] [Plank] [Plank]

Expanding the Large Chest

You can further expand the large chest by placing additional chests on its sides. To do this, simply approach the edge of the chest and place another chest next to it. The two chests will automatically merge to create an even larger chest.

5 Foolproof Ways to Make True Friends in Infinite Craft

In the realm of infinite possibilities, embark on a captivating journey to forge an unbreakable bond with a kindred spirit. Infinite Craft, a haven for aspiring architects, beckons you to transcend the boundaries of mere acquaintance and embrace the profound connection of true friendship. As you navigate this immersive digital landscape, let me guide you through the labyrinth of interactions and reveal the secrets to unlocking a lifelong companion within the enigmatic realm of Infinite Craft.

First and foremost, remember that a genuine bond is built upon the solid foundation of common interests. Seek out individuals who share your passion for meticulous crafting, intricate designs, and collaborative creativity. Participate actively in community challenges and global projects. These shared experiences provide ample opportunities to connect with like-minded souls who ignite your inspiration and spark meaningful conversations.

Beyond shared passions, true friendship blossoms in the soil of mutual respect and open-mindedness. In Infinite Craft, where diverse perspectives converge, embrace the beauty of collaboration. Listen attentively to the ideas of others, valuing their unique contributions. Offer constructive feedback, gently guiding them towards their full potential. In this spirit of support and encouragement, you create a fertile ground where friendships can flourish. As you traverse the expansive world of Infinite Craft, let your heart remain open to the possibility of finding that one extraordinary soul with whom you can share your creations, your dreams, and your unwavering support.

How to Make Best Friends in Infinite Craft

Making best friends in Infinite Craft can be a rewarding and fulfilling experience. Here are a few tips to help you do just that:

– **Be yourself.** The best way to attract genuine friends is to be yourself. Don’t try to be someone you’re not, because people will be able to tell. Just be yourself and let people see the real you.

– **Be kind and helpful.** One of the best ways to make friends is to be kind and helpful to others. Offer your help when you see someone struggling and be there to listen when someone needs a friend. People will be drawn to your kindness and will be more likely to want to be around you.

– **Be open to meeting new people.** One of the best ways to make friends is to be open to meeting new people. Talk to people you don’t know and ask them questions about themselves. You never know who you might meet and what kind of friendship you might form.

4 Ways to Get Souls of Night in Terraria

Embark on a mystical adventure in the enchanting world of Terraria, where the night conceals a hidden treasure—the Souls of Night. These ethereal orbs, pulsating with the essence of darkness, possess extraordinary power and hold the key to unlocking unimaginable secrets.

Navigating the treacherous terrain of the night can be a daunting task. As the sun dips below the horizon, casting long shadows across the land, formidable creatures emerge from the depths, their eyes glowing with an eerie intensity. But fear not, intrepid adventurers, for with a keen eye and a strategic approach, the Souls of Night can be yours.

As the moonlight casts its silvery glow upon the world, your quest begins. Summoning the might of your arsenal, venture forth into the nocturnal wilderness, where danger lurks at every turn. Seek out your quarry—the enigmatic Shadow Orb and Crimson Heart—and unleash your combat prowess to shatter their defenses. With each successful confrontation, you will be rewarded with the coveted Souls of Night, fragments of the celestial tapestry that holds the fate of the realm.

Using Soul Eater

The Soul Eater is a Hardmode yoyo that has a chance to drop from the Hallowed Mimic. It has a base damage of 60 and a very fast use time of 12. Its unique ability is that it can consume souls to deal extra damage.

To use the Soul Eater effectively, you need to collect souls. Souls can be obtained by killing enemies with the Soul Eater. Each enemy you kill will drop a certain number of souls, depending on the enemy’s type. You can also collect souls by using the Soul Magnet accessory.

Once you have collected enough souls, you can use them to power up the Soul Eater. To do this, simply hold down the attack button and release it when the bar at the bottom of the screen is full. When you release the attack button, the Soul Eater will release a powerful beam of energy that deals damage to all enemies in front of you. The amount of damage dealt by the beam depends on the number of souls you have collected.

Enemy Type	Souls Dropped
Normal enemies	1-3
Mini bosses	5-10
Bosses	20-50

Utilizing Night’s Edge

The Night’s Edge is a powerful sword that can be crafted by combining a Muramasa, a Fiery Greatsword, and a Blade of Grass at a Demon Altar or Crimson Altar. It deals 40 damage and has a fast swing speed, making it a great weapon for dealing with both single targets and groups of enemies.
It also has a unique ability that allows it to release a wave of energy that damages all nearby enemies. This ability can be used to deal with large groups of enemies or to clear out an area.
The Night’s Edge is a great weapon for early to mid-game content and can be used to defeat most of the bosses in the game. It is also a good weapon for farming Souls of Night, which can be used to craft powerful items.

Farming Souls of Night

Souls of Night are items that can be obtained by defeating enemies in the Corruption biome at night. They are used to craft powerful items, such as the Shadow Orb and the Night’s Edge.
There are a few different ways to farm Souls of Night. One way is to simply kill all of the enemies that you see in the Corruption biome at night.
Another way to farm Souls of Night is to use a Water Candle. A Water Candle will increase the spawn rate of enemies in the area where it is placed. You can place a Water Candle in the Corruption biome at night to increase the number of enemies that you kill and the number of Souls of Night that you obtain.
Finally, you can also use Battle Potions to increase your chances of obtaining Souls of Night. Battle Potions will increase the amount of damage that you deal to enemies and the amount of health that you receive from healing items.
The following table shows the drop rates for Souls of Night from different enemies in the Corruption biome:

Enemy	Drop Rate
Corruptor	1/150
Eater of Souls	1/100
Corrupt Slime	1/200
Zombie	1/250
Demon	1/500

Crafting the Shadowflame Hex Doll

To craft the Shadowflame Hex Doll, you will need the following materials:

Item	Quantity
Ectoplasm	10
Tissue Sample	5
Hellstone Bar	5
Obsidian	5
Bottled Water	1

Combine these materials at a Demon Altar or Crimson Altar to create the Shadowflame Hex Doll.

Once you have the Shadowflame Hex Doll, you can use it to summon the Soul of Night by throwing it into the lava in the Underworld.

The Soul of Night will spawn as a boss enemy that you must defeat to collect their soul.

Defeating the Soul of Night will reward you with the Shadowflame Bow, a powerful ranged weapon.

The Shadowflame Hex Doll can be used multiple times to summon the Soul of Night, so you can farm it for additional loot.

How To Get Souls Of Night Terraria

In Terraria, Souls of Night are a hardmode crafting material that can be obtained by defeating enemies in the underground Corruption or Crimson biomes at night time. They are used to craft a variety of items, including the Night’s Edge sword, the Muramasa, and the Fetid Baghnakhs.

To get Souls of Night, you will need to find an underground Corruption or Crimson biome. These biomes are characterized by their dark, purple or red environment and the presence of Corruptors or Crimson Mimics. Once you have found an underground Corruption or Crimson biome, you will need to wait until night time. At night time, the enemies in these biomes will have a chance to drop Souls of Night when they are defeated.

The drop rate for Souls of Night is 1/250, so you may need to defeat a few enemies before you get one. However, you can increase the drop rate by using a Battle Potion or a Water Candle. These items will increase the enemy spawn rate, which will give you more chances to get Souls of Night.

How To Hang Microwave On Wall

Mounting your microwave on the wall is a brilliant solution for maximizing kitchen space and enhancing functionality. Not only does it free up valuable counter space, but it also allows you to create a sleek, modern look. However, the process of hanging a microwave on the wall may seem daunting, but it’s surprisingly straightforward and can be accomplished with a few simple tools and some careful planning.

Before embarking on this task, it’s essential to gather the necessary tools and materials. You’ll need a drill, drill bits, screws, anchors (if necessary), a level, a tape measure, and a pencil. Additionally, you’ll require a mounting bracket that is specifically designed for your microwave model. The mounting bracket typically comes with the microwave, but if not, you can purchase one separately from the manufacturer or a hardware store.

Once you have all the necessary tools and materials, you can begin the installation process. Start by marking the location on the wall where you want to hang the microwave. Use a level to ensure that the location is straight and level. Next, drill pilot holes into the wall at the marked locations. Insert the anchors into the pilot holes if necessary. Finally, attach the mounting bracket to the wall using the screws and tighten them securely. With the mounting bracket in place, you can now lift the microwave onto the bracket and secure it.

Selecting the Optimal Wall Location

Choosing the ideal wall location for your microwave is crucial to ensure both safety and convenience. Consider the following factors when selecting a spot:

Accessibility: The microwave should be within easy reach when standing or sitting. Avoid mounting it too high or too low, as this can strain your back or arms.

To determine the ideal height, you can experiment by placing your microwave on a counter at different levels and using it as you would normally. You should be able to comfortably open the door and operate the controls without bending or straining.

Clearance Above and Below: Ensure there is sufficient clearance above and below the microwave for ventilation and ease of use. The manufacturer’s instructions will typically specify the minimum clearance required, which is usually around 12 inches above and 2 inches below.

Appliance	Minimum Clearance Above	Minimum Clearance Below
Microwave	12 inches	2 inches

Avoid placing the microwave in a cabinet or enclosed space, as this can restrict airflow and pose a fire hazard.

Proximity to Power Outlet: The microwave must be located near a grounded power outlet. Make sure the outlet is easily accessible and not behind the appliance, as this can make it difficult to unplug in case of an emergency.

Installing the Mounting Bracket

Before proceeding with the installation, it’s crucial to gather the necessary tools and components. These typically include:

Mounting bracket
Screwdriver (Phillips and/or flathead)
Drill
Measuring tape
Level
Pencil

With the necessary materials at hand, follow these detailed steps to securely mount the bracket:

1. Determine the Mounting Location

Select a suitable location for your microwave, ensuring that it is easily accessible and has sufficient ventilation. Use a measuring tape to mark the desired height for the bottom of the microwave, ensuring it is level with your countertop or other work surfaces.

2. Mark the Bracket Placement

Hold the mounting bracket against the wall at the designated height and use a pencil to mark the location of the mounting holes. Ensure that the bracket is centered and level, using the level tool to verify accuracy.

3. Drill the Pilot Holes

Using the marked locations, carefully drill pilot holes into the wall. The depth of the holes should be slightly shallower than the length of the screws provided with the bracket. This will ensure a secure hold without damaging the wall. If possible, use a drill bit slightly smaller than the screw diameter to create a snug fit.

Screw Type	Recommended Drill Bit Diameter
#8 Wood Screw	1/16 inch
#10 Wood Screw	5/32 inch
#12 Wood Screw	3/16 inch

Note: The table above provides general recommendations for drill bit diameters based on screw size. Always refer to the manufacturer’s instructions or consult a professional for specific guidance.

Hanging the Microwave on the Wall

1. Choose the Right Location

Select a spot that is over 3 feet off the ground and at least 6 inches away from any surrounding cabinets or walls. Ensure there is sufficient clearance for the microwave door to open fully.

2. Mark the Mounting Holes

Use a level to mark the location of the mounting holes on the wall. Make sure the holes are aligned horizontally.

3. Drill Pilot Holes

Drill pilot holes in the marked locations using a drill bit that is slightly smaller than the screws you will be using.

4. Insert Wall Anchors

Insert wall anchors into the pilot holes if necessary. This is particularly important for drywall or plaster walls.

5. Mount the Microwave Support

Line up the microwave support bracket with the marked holes and secure it using the screws provided.

6. Lift the Microwave into Place

Carefully lift the microwave and align it with the support brackets. Ensure that the hooks or latches engage securely.

7. Secure the Microwave

Tighten the screws or nuts that hold the microwave to the support brackets. Ensure the microwave is firmly secured and level.

Screw Size	Pilot Hole Size
#6 or #8	1/16 inch
#10 or #12	3/16 inch

Leveling and Aligning the Microwave

Ensuring that the microwave is level and aligned is crucial for both its stability and functionality. Follow these steps carefully:

1. Mark the Hanging Points

Refer to the template provided in the microwave’s manual and mark the hanging points on the wall.

2. Install the Mounting Bracket

Screw the mounting bracket into the marked points on the wall, ensuring it’s level.

3. Slide on the Microwave

Lift the microwave and slide it onto the mounting bracket.

4. Adjust the Height

Use the adjustable feet on the bottom of the microwave to level it perfectly. Check the front and sides with a spirit level.

5. Align the Top

If the microwave is slightly tilted forward or backward, adjust the screws on the mounting bracket until it aligns perfectly with the wall.

6. Check for Stability

Ensure that the microwave is securely in place and does not wobble or move when pushed gently.

7. Secure the Screws

Tighten all the screws on the mounting bracket and the feet of the microwave.

8. Adjust the Microwave’s Position (Optional)

Some microwaves offer additional adjustment options to fine-tune their position once mounted. These adjustments may include:

Adjustment	Purpose
Side-to-Side Leveling Screws	Adjust the microwave’s side-to-side alignment.
Flange Positioning Adjustment	Adjust the flange on the bottom of the microwave to align it perfectly with the mounting bracket.
Height Adjustment Bolts	Make minor height adjustments without removing the microwave from the bracket.

By carefully following these steps, you can ensure that your microwave is level, aligned, and securely mounted on the wall, ensuring both optimal performance and safety.

How to Hang a Microwave on the Wall

Hanging a microwave on the wall can be a great way to save counter space and keep your kitchen looking organized. However, it’s important to make sure that the microwave is hung securely and properly to avoid any accidents. Here are the steps on how to hang a microwave on the wall:

Choose the right location for the microwave. The microwave should be placed at a height that is comfortable for you to use, and it should be close to an electrical outlet.
Mark the location of the mounting bracket on the wall. The mounting bracket will come with a template that you can use to mark the location of the holes.
Drill the holes for the mounting bracket. Use a drill bit that is the same size as the screws that came with the mounting bracket.
Insert the mounting bracket into the holes and secure it with the screws.
Hang the microwave on the mounting bracket. The microwave should fit snugly onto the bracket.
Plug the microwave into the electrical outlet.

Top 5 Best Bases in Palworld

In the captivating realm of Palworld, embarking on an extraordinary adventure filled with unique and enigmatic creatures known as Pals is an experience unlike any other. Among the vast array of Pals that inhabit this intriguing world, certain individuals stand out as exceptional companions due to their extraordinary abilities and unwavering loyalty. However,

to truly harness the full potential of your Pal companions, it is imperative to establish a robust and well-equipped base. A base serves as your sanctuary, a haven where you can nurture your Pals, craft essential items, and prepare for the countless challenges that lie ahead. With meticulous planning and careful consideration, you can transform your base into an indispensable fortress, providing both comfort and strategic advantage as you traverse the untamed wilderness of Palworld.

When selecting the ideal location for your base, it is wise to seek out areas that offer access to abundant resources, such as water sources and fertile soil for cultivating crops. Proximity to key landmarks, such as towns and dungeons, can also prove advantageous. By establishing your base in a well-positioned location, you will not only expedite your daily tasks but also gain access to valuable trading opportunities and essential supplies.

Best Bases in Palworld

When choosing a base in Palworld, there are several factors to consider, such as location, resources, and defenses. With a wide variety of bases available, it can be challenging to decide which one is the best for you. Here are a few of the top bases in Palworld and their key features:

1. **Starlight Sanctuary**: Located in the lush forests of the Starlight Zone, this base offers a peaceful and tranquil setting for players. With abundant resources, including trees, rocks, and water, players can easily gather materials and build their base. The base also features a central lake that provides fishing opportunities for food and other resources.

2. **Mountaineer’s Lodge**: Perched high in the mountains of the Storm Peaks Zone, this base provides a breathtaking view of the surrounding landscape. It is an excellent location for players who enjoy exploring and hunting, as there are many animals and monsters roaming the nearby mountains. The base also offers convenient access to valuable resources, such as ore and gems.

3. **Coastal Haven**: Situated along the coast of the Azure Shores Zone, this base offers a serene and relaxing environment. With a steady supply of fish and other seafood, players can easily sustain themselves. The base also provides access to various resources, such as sand, shells, and driftwood, which can be used for building and crafting.

4. **Tech City**: Located in the urban center of the Tech Zone, this base offers a modern and futuristic atmosphere. With access to advanced technology, players can research and develop powerful weapons and equipment. The base also features a bustling marketplace where players can trade items and interact with other players.

5. **Eden’s Oasis**: Hidden deep within the desert of the Oasis Zone, this base provides a lush and verdant sanctuary. With a self-sustaining ecosystem, players can easily grow crops and raise animals for food. The base also features a large pool of water that serves as a source of irrigation and recreation.

5 Easy Steps to Put On Retainers

After months of wearing braces, you’ve finally reached the finish line. Your teeth are now straight and beautiful, and you can’t wait to show them off to the world. But before you can do that, you need to learn how to put on your retainers. Retainers are essential for keeping your teeth in their new positions, and they need to be worn as directed by your orthodontist. Putting on retainers can be a little tricky at first, but with a little practice, you’ll be a pro in no time. Here’s a step-by-step guide to help you get started.

First, wash your hands thoroughly with soap and water. This will help to prevent bacteria from getting into your mouth. Next, take your retainers out of their case and rinse them with water. Gently insert the retainers into your mouth, and position them over your teeth. The upper retainer should fit snugly over your upper teeth, and the lower retainer should fit snugly over your lower teeth. Once the retainers are in place, gently bite down to secure them. You may feel some pressure at first, but this is normal. The retainers should fit comfortably within a few minutes.

If you have any trouble putting on your retainers, don’t hesitate to ask your orthodontist for help. They can show you the proper way to insert and remove your retainers, and they can answer any questions you may have. Wearing retainers is an important part of orthodontic treatment, and it’s important to wear them as directed by your orthodontist. By following these simple steps, you can help to keep your teeth straight and beautiful for years to come.

Understanding the Purpose of Retainers

Preventing Teeth from Shifting

The primary purpose of retainers is to prevent teeth from shifting out of their new alignment after orthodontic treatment. When braces are removed, teeth may naturally try to return to their original positions. Retainers act as a barrier, holding teeth in their corrected positions and allowing bone and tissue to stabilize around them. Without retainers, teeth can gradually move, leading to a relapse of orthodontic problems.

Types of Retainers

There are two main types of retainers: fixed and removable.

	Type
Fixed Retainers	Bonded to the back of the teeth Permanent and cannot be removed by the wearer Less visible and more discreet
Removable Retainers	Made of plastic or wire Can be removed for eating, brushing, and special occasions Require more diligent wear to be effective

Preparing Your Retainers for Use

Before inserting your retainers, it’s crucial to prepare them properly to ensure their cleanliness and effectiveness. Here are the steps involved:

Cleaning Your Retainers

Regularly cleaning your retainers is essential for maintaining oral hygiene. Here’s how to do it:

Rinse Your Retainers: Use lukewarm water to remove any food debris or saliva from your retainers.
Use a Retainer-Specific Cleaner: If available, use a specialized cleaner designed for retainers. Follow the instructions on the product.
Brush with a Soft-Bristled Toothbrush: Gently brush the retainers with a toothbrush and mild toothpaste or denture cleaner. Avoid abrasive brushes or toothpastes that could scratch or damage them.
Soak Overnight (Optional): To remove stubborn stains or odors, consider soaking your retainers overnight in a denture-cleaning solution or hydrogen peroxide solution.

Fitting Your Retainers

If your retainers fit snugly but not too tightly, they’ll be most effective. Here’s how to check the fit:

Insert the Retainers: Gently place the retainers into your mouth and press them into place with your fingers.
Check for Comfort: Your retainers should fit comfortably, allowing you to speak, smile, and eat without any discomfort.
Adjust if Loose: If the retainers feel loose, they may need to be adjusted by your dentist or orthodontist.
Avoid Overtightening: Make sure the retainers are not too tight, as this could cause discomfort and damage to your teeth.

Storing Your Retainers

Proper storage prevents damage to your retainers while keeping them clean. Follow these tips:

Use a Retainer Case: Always store your retainers in a dedicated case to protect them from dust and scratches.
Keep Them Moist: Retainers can dry out, so store them in a case with a damp paper towel or a retainer-soaking solution.
Avoid Extreme Temperatures: Keep your retainers away from extreme heat or cold, which could warp or damage them.

Inserting the Upper Retainer

To insert your upper retainer, follow these steps:

Start from the back of the retainer. Align the back of the retainer with the molars on your upper arch.
Press gently inward. Using your thumbs, gently push the retainer inward so that it fits snugly against the back of your teeth.
Push the retainer into place. Once the back of the retainer is in place, use your fingertips to push the remaining part of the retainer over your teeth. Start from the molars and work your way forward to the front teeth.
Use a rocking motion. If the retainer is slightly too tight, try using a gentle rocking motion as you push it into place. This will help to distribute the pressure and make it easier to insert.

Tip:

If you have difficulty inserting the upper retainer, try using a warm water rinse to soften the plastic. This can make it easier to manipulate and fit into place.

Description	Image
Align the back of the retainer with the molars.	” alt=”Align the back of the retainer with the molars.”
Press gently inward.	” alt=”Press gently inward.”
Push the retainer into place.	” alt=”Push the retainer into place.”
Use a rocking motion.	” alt=”Use a rocking motion.”

Inserting the Lower Retainer

Inserting the lower retainer requires similar steps to the upper retainer. However, there are slight variations due to the different shape and positioning of the lower jaw.

Step 1: Rinse and Check the Retainer

Rinse the lower retainer thoroughly with lukewarm water to remove any debris or saliva.

Step 2: Position the Retainer

Hold the retainer with its labial bow facing down. Place the archwire along the inner surface of your lower teeth, starting at the back molars.

Step 3: Insert the Labial Bow

Gently push the labial bow over the lower teeth, applying even pressure on both sides. Ensure that the bow fits snugly against the teeth, but not too tightly.

Step 4: Secure the Clasps

The lower retainer typically has clasps or hooks that attach to the molars or premolars. Locate these clasps and guide them onto the corresponding teeth. Apply gentle pressure to ensure the clasps slide into place securely.

Additional Tips
If the clasps are difficult to insert, try using a dental floss threader to guide them over the teeth. Avoid biting or chewing on the retainer while securing the clasps. If the retainer is causing any discomfort or pain, remove it and consult with your orthodontist.

Removing the Upper Retainer

To remove the upper retainer, gently hold the front of the retainer with your index finger and thumb, close to the right and left molars. With your other hand, pull the retainer down, away from your teeth until it snaps out.

Tips for Removing the Upper Retainer:

**Be gentle:** Avoid using excessive force to remove the retainer, as it could damage your teeth or the retainer.
**Don’t bite the retainer:** Biting down on the retainer can cause it to break.
**Pull straight down:** If you pull the retainer at an angle, it could become stuck or break.
**Use a mirror:** This can help you see better and avoid accidentally putting your fingers in your mouth.
**If it’s difficult to remove:** Don’t force it. Try soaking the retainer in warm water for a few minutes to soften the material.
**Clean the retainer before reinserting it:** Remove any food or debris from the retainer before putting it back in your mouth. This will help prevent bacteria from accumulating.

Removing the Lower Retainer

Step-by-Step Guide:

Wash your hands: To maintain hygiene, wash your hands thoroughly with soap and water before handling your retainers.
Locate the retainer: The lower retainer usually has a wire or plastic bar that fits across the back of your lower teeth.
Gently lift the front: Using your fingers, gently lift the front part of the lower retainer upwards and away from your teeth.
Pull the bar forward: Continue lifting and pulling the bar of the retainer forward over your teeth. Keep your grip firm and steady.
Unhook the back: Once the bar is free of your teeth, carefully unhook the ends of the wire or plastic from the attachments on the back molars.
Additional tips:

a. Avoid using excessive force: Be gentle and avoid pulling or tugging on the retainer too forcibly. Excessive force can damage the retainer or your teeth.

b. Take breaks if needed: If you encounter resistance while removing the retainer, take a short break and try again later. Waiting a few minutes can allow for the retainer to loosen naturally.

c. Use a mirror: A mirror can provide better visibility and help you ensure that you are removing the retainer correctly.

d. Store the retainer safely: Once removed, rinse the lower retainer thoroughly with lukewarm water and store it in a clean case or container.

Maintaining Your Retainers

Properly maintaining your retainers will ensure their effectiveness and longevity.

7. Cleaning Your Retainers

Regularly cleaning your retainers is essential to prevent bacterial buildup and maintain their hygienic condition. Follow these steps for effective cleaning:

1. Rinse: Rinse your retainers thoroughly with lukewarm water to remove any food particles or debris.
2. Brush: Use a soft-bristled toothbrush and a mild, non-abrasive toothpaste to gently brush the surfaces of the retainer, inside and out. Avoid using harsh chemicals or abrasive cleansers.
3. Soak: Soak your retainers in an approved retainer-cleaning solution for the recommended duration, typically 15-30 minutes.
4. Rinse again: Rinse the retainers thoroughly with lukewarm water to remove any residual cleaning solution.
5. Dry: Pat your retainers dry with a clean towel before storing them.

Handling Discomfort with Retainers

Wearing retainers can initially cause some discomfort. Here are some tips to alleviate this:

1. Start with short wearing periods

Gradually increase the duration you wear your retainers each day.

2. Use a cold compress

Apply a cold compress to your face around your retainer to numb the discomfort.

3. Take pain relievers

Over-the-counter pain relievers, such as ibuprofen or acetaminophen, can help reduce soreness.

4. Rinse your mouth with warm water

Rinse your mouth with warm salt water to soothe and disinfect the irritated areas.

5. Eat soft foods

Avoid hard or chewy foods that can put pressure on your teeth.

6. Use a dental wax

Apply dental wax to the edges of your retainer that are rubbing against your cheeks or gums.

7. Sleep with your retainers

Wearing your retainers while sleeping can help reduce discomfort during the day.

8. Medications for Severe Discomfort

In some cases, your orthodontist may prescribe medications such as muscle relaxants or oral steroids to relieve severe discomfort and inflammation. It is crucial to consult your orthodontist if you experience significant pain or discomfort while wearing your retainers.

Tips for Successful Wear Time

Break Them In Gradually

Start by wearing your retainers for a few hours each day and gradually increase the wear time as you become more comfortable. This will help reduce discomfort and prevent irritation.

Clean Your Retainers Regularly

Brush your retainers twice a day with a soft toothbrush and toothpaste. You can also soak them in a retainer cleaning solution as directed by your dentist.

Remove Before Eating and Drinking

Take out your retainers before eating or drinking anything other than water. This will prevent them from becoming stained or damaged.

Store Your Retainers Properly

When you’re not wearing your retainers, store them in a hard case filled with water. This will keep them moist and prevent them from drying out.

See Your Dentist Regularly

Visit your dentist for regular checkups to ensure that your retainers are fitting properly and that your teeth are staying in place.

Follow Your Dentist’s Instructions Carefully

Your dentist will provide you with specific instructions on how to wear and care for your retainers. Be sure to follow these instructions carefully to achieve the best results.

Other Tips

Be patient and consistent with wearing your retainers.
Don’t be afraid to ask your dentist or orthodontist for help if you have any questions or concerns.
Remember that wearing your retainers is essential for keeping your teeth straight and in place after orthodontic treatment.

Troubleshooting Common Problems

Problem	Solution
Discomfort	Break in your retainers gradually and use a pain reliever if necessary.
Staining	Clean your retainers regularly with a retainer cleaning solution.
Damage	Store your retainers properly and avoid chewing on them.

Fitting the Retainer

Start by placing the retainer on your teeth. The retainer should fit snugly against your teeth, with no gaps or spaces. If the retainer is too tight, it can cause pain or discomfort. If it is too loose, it may not be able to hold your teeth in place properly. Gently adjust the retainer until it fits comfortably and securely.

Wearing the Retainer

Wear your retainer as directed by your orthodontist. This will vary depending on your individual circumstances. Some people may need to wear their retainer only at night, while others may need to wear it full-time. It is important to follow your orthodontist’s instructions carefully to ensure that your teeth remain in the correct position.

Cleaning the Retainer

Clean your retainer every day. Use a soft-bristled toothbrush and toothpaste to gently brush away any food or debris. You can also soak your retainer in a denture cleaning solution or a mixture of white vinegar and water. Do not use hot water, as this can damage the retainer.

Common Mistakes to Avoid with Retainers

Here are some common mistakes to avoid when using retainers:

1. Not wearing your retainer as directed

It is important to wear your retainer as directed by your orthodontist. Failure to wear your retainer as directed can result in your teeth shifting back to their original position. This can undo all the progress that you have made with your orthodontic treatment.

2. Damaging your retainer

Retainers are delicate appliances. They can be easily damaged if they are not handled with care. Avoid dropping your retainer or chewing on it. Also, do not use hot water to clean your retainer, as this can damage the plastic.

3. Eating with your retainer in

You should not eat with your retainer in. Food can get trapped in the retainer and damage it. It can also make it difficult to clean your teeth and gums properly.

4. Drinking sugary drinks with your retainer in

Sugary drinks can damage your teeth and your retainer. Avoid drinking sugary drinks while you are wearing your retainer.

5. Losing your retainer

Retainers are small and can be easily lost. Be sure to keep your retainer in a safe place when you are not wearing it. If you lose your retainer, contact your orthodontist immediately.

6. Ignoring pain or discomfort

If you experience any pain or discomfort while wearing your retainer, contact your orthodontist. They may need to adjust the retainer or recommend another treatment option.

7. Leaving your retainer in too long

It is important to follow your orthodontist’s instructions regarding how long to wear your retainer. Wearing your retainer for too long can damage your teeth and gums.

8. Not cleaning your retainer properly

It is important to clean your retainer every day. Failure to clean your retainer can lead to bacteria buildup, which can cause infection.

9. Using a retainer that is not made for you

Using a retainer that is not made for you can cause pain and damage your teeth. Be sure to get a retainer that is properly fitted by your orthodontist.

10. Not following up with your orthodontist

It is important to follow up with your orthodontist regularly to make sure that your retainer is working properly and that your teeth are staying in the correct position. Failure to follow up with your orthodontist can result in problems with your retainer or your treatment.

How to Put On Retainers

Retainers are orthodontic appliances that help maintain the alignment of your teeth after orthodontic treatment. To properly put on retainers, follow these steps:

Wash your hands thoroughly.
Inspect the retainer. Check for any cracks, chips, or breaks. If you notice any damage, do not put the retainer in your mouth and contact your orthodontist.
Wet the retainer. Run the retainer under cold water for a few seconds to make it easier to insert.
Place the retainer in your mouth. Position the retainer over your teeth and gently press it into place. Use your fingers to apply even pressure all around.
Bite down gently. Once the retainer is in place, bite down gently to secure it. Do not bite down hard or chew with the retainer in.

Top 5 Ways to Craft Gruel in Conan Exiles

Conan Exiles is a survival game where players must gather resources, build shelter, and craft tools in order to survive. One of the most important resources in the game is food, and gruel is a simple but filling dish that can be made from a variety of ingredients. Gruel is a versatile dish that can be used to restore health, stamina, and hunger. It is also a good source of vitamins and minerals. In this guide, we will show you how to make gruel in Conan Exiles. To make gruel, you will need the following ingredients:

• 1 cup of water
• 1/2 cup of grain (such as wheat, barley, or oats)
• 1/4 cup of cooked meat (optional)
• Salt and pepper to taste
Instructions:
1. Combine the water and grain in a cooking pot.
2. Bring the mixture to a boil over a fire.
3. Reduce heat and simmer for 15 minutes, or until the grain is cooked through.
4. Stir in the cooked meat, if desired.
5. Season with salt and pepper to taste.
Your gruel is now ready to serve. Enjoy!

In addition to the basic recipe, there are several ways to customize your gruel. For example, you can add fruits, vegetables, or herbs to the mixture for extra flavor. You can also use different types of grain, such as quinoa or rice. If you are feeling creative, you can even experiment with different cooking methods, such as baking or frying. No matter how you choose to make it, gruel is a delicious and nutritious dish that is sure to keep you going in the harsh world of Conan Exiles.

Gathering Essential Ingredients

To craft gruel in Conan Exiles, you’ll need to gather several essential ingredients. These include:

1. Plant Fiber

Plant Fiber is the most abundant ingredient required for gruel. It can be harvested from most plants and bushes throughout the Exiled Lands. Simply approach a suitable plant and interact with it to gather Plant Fiber. You can also obtain Plant Fiber by harvesting Aloe Vera plants. Aloe Vera can be found in abundance in the warmer, desert regions of the Exiled Lands.

Plant Source	Harvest Yield
Tall Grass	3-6 Plant Fiber
Desert Shrub	2-4 Plant Fiber
Aloe Vera	10 Plant Fiber
Bush	4-8 Plant Fiber

You will need to gather a total of 10 Plant Fiber to craft one unit of gruel.

2. Water

Water is an essential ingredient for all cooking recipes in Conan Exiles. You can gather water from any water source, such as rivers, lakes, or water wells. Simply equip a Waterskin or empty flask and interact with the water source to fill it.

You will need to gather one unit of Water to craft one unit of gruel.

3. Raw Meat

Raw Meat is another essential ingredient for gruel. You can obtain Raw Meat by hunting and killing animals. Once you have killed an animal, interact with its corpse to harvest Raw Meat.

You will need to gather two units of Raw Meat to craft one unit of gruel.

The Art of Cooking Gruel

Ingredients

To craft Gruel in Conan Exiles, you will need the following ingredients:

Flour: 2 units. Flour is a basic ingredient obtained by grinding Grain in a Millstone.

Water: 1 unit. Water can be collected from water sources like rivers, lakes, or wells.

Cooking Process

Once you have gathered the necessary ingredients, you can start cooking Gruel at a Cooking Station.

Step-by-Step Instructions

Place the Flour and Water into the Cooking Station.
Initiate the cooking process. This will take a few seconds.
Once complete, collect the Gruel from the Cooking Station.

Gruel is a basic food item that can help sustain your character’s hunger. It can also be used as an ingredient in other recipes, such as Spicy Gruel.

Nutritional Information

Here is the nutritional information for Gruel in Conan Exiles:

Nutrient	Amount
Calories	150
Hunger	10
Thirst	10

Crafting a Cooking Pot

To craft a Cooking Pot in Conan Exiles, you will need the following resources:

Resource	Quantity
Hardened Brick	10
Iron Bar	2

Once you have gathered the required resources, open your Crafting Menu (default key: E) and navigate to the “Tools” tab. Locate the “Cooking Pot” recipe and click on it. Then, click on the “Craft” button to begin the crafting process.

Additional Tips for Crafting a Cooking Pot:

Hardened Bricks can be crafted at a Furnace using Clay and Stone.
Iron Bars can be crafted at a Blacksmith’s Bench using Iron Ore.
The Cooking Pot can also be purchased from certain NPC vendors in the game.
Placing the Cooking Pot on a Stove or Campfire will allow you to use it.

Selecting the Ideal Fuel Source

When choosing a fuel source for cooking gruel in Conan Exiles, several factors come into play. Each fuel type offers unique advantages and drawbacks, so it’s essential to select one that best suits your needs. Here are the key considerations:

Fuel Efficiency

Fuel efficiency measures how much gruel you can cook with a given amount of fuel. Some fuels, such as Wood and Thatch, burn quickly and provide less cooking time than others. Conversely, Emberwood and Coal offer higher efficiency, allowing you to cook more gruel with fewer resources.

Temperature

The temperature of the fire is crucial for cooking gruel effectively. Some fuels, like Wood and Thatch, produce high temperatures but burn out quickly. In contrast, Emberwood and Coal maintain a steady temperature for longer, ensuring that your gruel cooks evenly throughout.

Availability

The availability of fuel sources in your chosen area can significantly impact your choice. Wood is readily found in forests, while Thatch can be gathered from grassy plains. Emberwood is less common but can be obtained by burning Wood. Coal, the most efficient fuel, is typically found in mines and requires specific tools to extract.

The following table summarizes the key characteristics of each fuel type:

Fuel Type	Fuel Efficiency	Temperature	Availability
Wood	Low	High	High
Thatch	Low	Low	High
Emberwood	High	Medium	Moderate
Coal	Very High	Medium	Low

Mastering the Cooking Process

To ensure perfect gruel every time, follow these crucial steps:

1. Selecting the Right Ingredients

Choose fresh, ripe ingredients for optimal flavor. Avoid using bruised or spoiled produce.

2. Precise Measurements

Use accurate measuring cups and spoons to ensure the correct proportions of ingredients. This helps maintain the proper consistency of the gruel.

3. Adjusting for Altitude

If cooking at high altitudes, adjust the liquid level slightly. Add a few extra tablespoons of water or broth to prevent the gruel from becoming too thick.

4. Stirring Regularly

Stir the gruel continuously throughout the cooking process. This prevents scorching and ensures even distribution of flavors.

5. Determining Consistency

The perfect gruel strikes the balance between creaminess and thinness. Refer to the table below for guidance:

Consistency	Characteristics
Thin	Pours easily, similar to water
Medium	Slightly thickened, coats the back of a spoon
Thick	Holds its shape, spreads slowly on bread

Adjust the amount of liquid accordingly to achieve your desired consistency.

Ingredients

Gruel is a thick porridge that is a staple food in the game Conan Exiles. It is made from grain, water, and salt, and can be cooked over a campfire or in a stove using a cooking pot or cauldron.

To make gruel, you will need:

10x Grain
10x Water
1x Salt

Instructions:

Combine the grain, water, and salt in a cooking pot or cauldron.
Place the cooking pot or cauldron over a campfire or stove.
Cook the gruel until it is thick and creamy, stirring occasionally.
Serve the gruel hot or cold.

Preserving and Storing Gruel

Gruel can be preserved and stored for later use. To preserve gruel, place it in a sealed container and store it in a cool, dark place. Gruel will last for several days when stored in this manner.

To store gruel, you will need:

A sealed container
A cool, dark place

Instructions:

Place the gruel in a sealed container.
Store the container in a cool, dark place.
The gruel will last for several days when stored in this manner.

Here are some additional tips for preserving and storing gruel:

Tip	Description
Use a clean container.	This will help to prevent the gruel from becoming contaminated.
Store the gruel in a cool, dark place.	This will help to prevent the gruel from spoiling.
Do not store the gruel for more than a few days.	Gruel will eventually spoil, so it is important to eat it or discard it within a few days of making it.

Gruel’s Nutritional Value

Gruel is a versatile dish that can be a valuable source of nourishment in Conan Exiles. Its nutritional content varies depending on the ingredients used, but in general, gruel offers the following nutrients:

Calories

Gruel is a calorie-rich food, providing roughly 400 calories per serving. This makes it an ideal meal for those who need to replenish their energy quickly.

Carbohydrates

The majority of gruel’s calories come from carbohydrates, which are essential for providing energy to the body. One serving of gruel contains approximately 60 grams of carbohydrates.

Protein

Gruel also provides a moderate amount of protein, which is necessary for building and repairing tissues. Each serving contains about 15 grams of protein.

Fat

Gruel is a low-fat food, with only about 5 grams of fat per serving. This makes it a good option for those who are trying to lose weight or maintain a healthy weight.

Vitamins and Minerals

Gruel is a good source of several vitamins and minerals, including:

Nutrient	Amount per serving
Vitamin C	10 mg
Iron	2 mg
Calcium	100 mg
Potassium	200 mg

Overall, gruel is a nutritious and filling food that can be a valuable addition to any diet. It is easy to prepare and can be made with a variety of ingredients, making it a versatile option for those who are trying to eat a healthy and balanced diet.

Culinary Variations for Enhanced Flavor

While gruel may seem like a simple dish, there are several ways to enhance its flavor. By experimenting with different ingredients and cooking methods, you can create a delicious and satisfying meal. Here are a few variations to try out:

Spiced Gruel

Add a kick to your gruel by adding a pinch of spices. Cumin, coriander, and paprika are all good options that will add depth and complexity to the flavor. You can also add a touch of chili powder for a spicy kick.

Herbed Gruel

Fresh herbs can also add a burst of flavor to your gruel. Try adding chopped basil, parsley, or cilantro to the pot. These herbs will give your gruel a bright and refreshing taste.

Creamy Gruel

If you want a richer and creamier gruel, try adding a dollop of milk or cream. This will make the gruel more decadent and satisfying.

Savory Gruel

For a more savory gruel, add some cooked meat or vegetables to the pot. This will give your gruel a hearty and filling boost. Some good options include bacon, sausage, onions, or carrots.

Sweet Gruel

If you have a sweet tooth, try adding some fruit to your gruel. Dried fruits, such as raisins or cranberries, are a great way to add sweetness and flavor. You can also add a drizzle of honey or maple syrup to the finished product.

Flavor Variations Table

Variation	Ingredients
Spiced Gruel	Cumin, coriander, paprika, chili powder
Herbed Gruel	Basil, parsley, cilantro
Creamy Gruel	Milk or cream
Savory Gruel	Cooked meat or vegetables (bacon, sausage, onions, carrots)

Ingredients

* 1 hide
* 4 fibrous leaves

Instructions

1. Combine the hide and fibrous leaves in a cooking pot.
2. Add water to the pot until the ingredients are covered.
3. Place the pot over a fire source and allow the gruel to boil.
4. Once the gruel has boiled, reduce the heat to low and simmer for 30 minutes.
5. Remove the pot from the heat and allow the gruel to cool slightly before serving.

Optimizing Gruel for Survival

Increasing Nutrients

* Add cooked meat to the gruel for extra protein.
* Include vegetables or berries for vitamins and minerals.

Enhancing Flavor

* Season the gruel with salt and pepper to taste.
* Add herbs or spices for extra flavor.

Preserving Gruel

* Store gruel in a cool, dry place.
* It will keep for up to 3 days.

Versatile Survival Food

* Gruel can be eaten hot or cold.
* It can be used to thicken soups and stews.
* It can be added to breads and other baked goods.

Optimizing Gruel for Survival

Gruel, a simple and nutritious meal, is essential for survival in Conan Exiles. By optimizing its ingredients, nutritional value, and versatility, you can maximize its benefits in your fight against the harsh wilderness:

Nutritional Value:

Add cooked meat to enhance protein content.
Include vegetables or berries for vitamins, minerals, and antioxidants.

Flavor and Preservation:

Season with salt and pepper for taste.
Add herbs or spices to elevate flavor.
Store in a cool, dry place to extend its shelf life (up to 3 days).

Versatility:

Consume gruel hot or cold for convenience.
Thicken soups and stews with gruel for added nourishment.
Incorporate gruel into breads and baked goods to boost their nutritional profile.

Gruel in Conan Exiles: Tips and Tricks

Gathering Ingredients

Gruel requires water and grain, both of which are readily available in most areas of the Exiled Lands. Water can be collected from rivers, lakes, and oases, while grain can be harvested from grass clumps or purchased from vendors.

Cooking Gruel

To cook gruel, you will need a cooking pot or stove and a source of fuel. Place the grain and water in the cooking receptacle and light the fuel. The cooking time will vary depending on the type of cooking device and fuel used.

Cooling Gruel

Once the gruel is cooked, it will need to be cooled before consuming. You can do this by placing the cooking pot or stove in a cool place or using a cooling rack. Cooling the gruel will help prevent it from spoiling.

Storing Gruel

Gruel can be stored in a refrigerator or other cool place for up to 24 hours. It is not recommended to store gruel for longer than this as it can spoil and become unsafe to eat.

Eating Gruel

Gruel is a nourishing food that can help you replenish your health and stamina. It is also a good source of hydration. However, it is important to note that gruel is not a complete meal and should be supplemented with other foods.

Using Gruel to Tame Animals

Gruel can be used to tame certain animals in Conan Exiles. These animals include dogs, horses, and camels. To tame an animal, simply feed it gruel until it becomes tame.

Nutritional Value of Gruel

Gruel is a good source of carbohydrates, protein, and iron. It is also a low-fat and low-sodium food. The nutritional value of gruel can vary depending on the type of grain used.

Nutritional Value of Gruel

Nutrient	Amount per Serving
Calories	150
Carbohydrates	25 grams
Protein	5 grams
Iron	2 milligrams
Fat	1 gram
Sodium	10 milligrams

Health Benefits of Gruel

Gruel is a healthy food that can provide several health benefits. These benefits include:

Improved digestion
Reduced cholesterol levels
Lower blood sugar levels
Increased energy levels
Improved sleep

Tips for Making the Most of Gruel

Here are a few tips for making the most of gruel:

Use a variety of grains to create different flavors and textures.
Add fruits, vegetables, or herbs to your gruel for added flavor and nutrition.
Cook your gruel in a slow cooker to allow the flavors to meld.
Serve your gruel warm or cold, depending on your preference.
Enjoy your gruel as a healthy and satisfying meal or snack.

How To Make Gruel In Conan Exiles

Gruel is a simple but filling food that can be made in Conan Exiles. It is made from flour and water, and can be cooked over a campfire or in a cooking pot. Gruel can be eaten on its own, or it can be used to make other dishes, such as stew or porridge. Below are the steps on how to make gruel in Conan Exiles:

Gather the necessary ingredients. You will need 1x Waterskin and 1x Grain.
Combine the ingredients in a Cooking Pot or Cauldron. If you don’t have a Cooking Pot or Cauldron, you can also cook the Gruel over a campfire.
Cook the Gruel until it is done. The cooking time will vary depending on the type of cooking device you are using.
Once the Gruel is done, it can be eaten or used to make other dishes.

5 Best Queens Blood Decks for Final Fantasy 7 Rebirth

Featured Image: [Image of Final Fantasy VII Rebirth: Queen’s Blood Best Deck]

In the captivating world of Final Fantasy VII Rebirth: Queen’s Blood, strategic deck-building is paramount for triumph in the face of formidable adversaries. Among the myriad of decks at your disposal, one reigns supreme – the Queen’s Blood deck. This formidable deck harnesses the unwavering strength of the Blood Queen, granting players an unparalleled advantage in combat. As you embark on your epic journey, meticulously crafting the optimal Queen’s Blood deck is imperative to maximize your chances of victory. Join us as we delve into the intricacies of this extraordinary deck, unlocking its hidden potential and empowering you to conquer the most daunting challenges that await.

The cornerstone of the Queen’s Blood deck lies in the judicious selection of cards that synergize seamlessly with each other. At the heart of the deck, the Blood Queen herself stands as a beacon of indomitable strength. Her innate abilities, coupled with a carefully chosen retinue of cards, amplify her prowess to astonishing levels. By combining cards that increase her damage output, reduce the cost of her attacks, and provide her with additional resilience, you can transform the Blood Queen into an unstoppable force on the battlefield. Moreover, the deck’s versatility extends beyond its offensive capabilities, as it also incorporates cards that enhance defense and manipulation, ensuring your survival and control over the ebb and flow of combat.

To further enhance the effectiveness of the Queen’s Blood deck, meticulous attention must be paid to the balance of cards within its ranks. While a plethora of powerful cards are available, it is essential to avoid overloading the deck with high-cost cards that may hinder your ability to consistently draw the cards you need when they are most crucial. By strategically diversifying your deck with a mix of low-cost and high-value cards, you can maintain a consistent flow of options while maximizing the impact of your Blood Queen’s devastating abilities. Additionally, incorporating cards that provide card draw and manipulation will further enhance your ability to swiftly access the cards you need to secure victory, allowing you to adapt effortlessly to the ever-changing circumstances of battle.

Queens of the Blood Throne

The Queens of the Blood Throne are a powerful archetype in Final Fantasy VII Rebirth that revolves around manipulating and sacrificing units to gain advantages in battle. Their core mechanic involves using the “Blood Throne” ability, which allows them to sacrifice a unit to gain a powerful bonus. This bonus can range from increased attack power to healing effects, making the Queens of the Blood Throne a versatile and adaptable archetype.

Core Cards

Card Name	Effect
Blood Throne	Sacrifice a unit to gain a bonus equal to its attack power.
Crimson Queen	When summoned, allows you to sacrifice a unit without using the Blood Throne ability.
Blood Knight	Gains attack power equal to the number of units sacrificed this turn.

Strategy

The Queens of the Blood Throne archetype is best played aggressively, focusing on sacrificing units early to gain a significant advantage in attack power. However, it’s crucial to balance sacrifices with maintaining a steady flow of units to keep the pressure on your opponent. The Crimson Queen is a key card in this strategy, as she allows for additional sacrifices without consuming the Blood Throne ability. By carefully managing your resources and timing your sacrifices, you can overwhelm your opponents with an unrelenting stream of attacks.

The Crimson Gambit: Tricking Foes with Skill

The Crimson Gambit is a formidable deck in Final Fantasy VII Rebirth that specializes in manipulating the opponent’s strategy and capitalizing on their weaknesses. This deck revolves around the intricate use of status effects, delayed damage, and cunning card abilities to outwit and overwhelm foes. When played skillfully, the Crimson Gambit can turn the tide of battle in your favor, leaving adversaries baffled and vulnerable.

Unveiling the Crimson Gambit’s Strength

The Crimson Gambit draws its power from its ability to disrupt and control the opponent’s moves. By applying status effects such as Sleep or Paralyze, you can effectively restrict their card selection and prevent them from executing their plans. Furthermore, cards like “Delayed Attack” and “Poison” allow you to stack up damage over multiple turns, creating a persistent threat that your opponent must address.

Mastering the Crimson Gambit’s Tactics

To wield the Crimson Gambit effectively, you must possess keen observation skills and a deep understanding of your opponent’s cards. Pay close attention to their deck composition and anticipate their likely moves. By playing cards that disrupt their strategy early on, you can gain a decisive advantage and force them to adapt or lose. The key to success lies in staying one step ahead and exploiting their vulnerabilities with precision.

Case Study: Defeating the Emperor with the Crimson Gambit

One notable example of the Crimson Gambit’s effectiveness is in the battle against the Emperor, a formidable opponent in Final Fantasy VII Rebirth. By using “Poison” and “Delayed Attack” to accumulate damage over time, you can gradually weaken the Emperor while simultaneously disrupting his card selection with cards like “Sleep” and “Paralyze.” This approach effectively cripples his powerful attacks and forces him to spend precious CP on cards that counter your status effects. By playing patiently and exploiting his weaknesses, you can overcome the Emperor and achieve victory.

Synapse of Sacrifice: Blood for Power

The Queen’s Blood Synapse is a powerful tool in FF7 Rebirth. It allows players to sacrifice their own health to gain a temporary boost in power. While this can be a risky move, it can also be extremely effective when used strategically.

3. Benefits of Using the Queen’s Blood Synapse

There are several benefits to using the Queen’s Blood Synapse. First, it can provide a substantial boost to your damage output. When activated, the Synapse increases your attack power by 20%. This can make a significant difference in boss fights or other challenging encounters.

4. Risks of Using the Queen’s Blood Synapse

However, there are also some risks to consider before using the Queen’s Blood Synapse. First, it requires you to sacrifice your own health. Each time you activate the Synapse, you will lose 10% of your current health. This can put you in a dangerous position, especially if you are already low on health.

5. How to Use the Queen’s Blood Synapse Effectively

The key to using the Queen’s Blood Synapse effectively is to weigh the risks and benefits carefully. If you are facing a tough enemy and you need a quick boost in power, the Synapse can be a good option. However, if you are already low on health or if you are facing a long, drawn-out battle, it may be better to save the Synapse for a more opportune time.

Effect	Cost
+20% Attack Power	-10% Current Health

The Art of Evasion: Dancing Among Strikes

6. Finding Your Groove in the Queen’s Gambit

The Queens’ Gambit variation of Rebirth’s Blood deck revolves around strategically placing Queens on the field to gain an advantage. Here’s a detailed guide to mastering this finesse-driven style:

Positioning is Paramount: Place your Queens at key strategic points on the field to control lanes and disrupt your opponent’s movements. Consider blocking enemy units, protecting your own, and setting up potential combos.

Chain Reactions: Use your Queen’s abilities to trigger chain reactions within your team. Empress can heal allies, while Meteor Strike can take out multiple enemies. Think ahead and anticipate the ripple effects of each move.

Counterplay: Anticipate your opponent’s moves and plan your counters accordingly. If they threaten your Queens, use Evasion or Queen’s Waltz to dodge attacks and rearrange your formation.

Queen’s Waltz: This unique ability allows your Queen to dance around the battlefield, swapping positions with another unit. Use Queen’s Waltz for evasion, repositioning, or setting up powerful setups.

Final Gambit: As the game progresses, you’ll want to Consolidate your Queens into a single, unstoppable force. Use Unification to merge them, then unleash their combined might upon your opponents.

Notable Cards:

Card	Effect
Empress	Heals allies and grants Regen
Meteor Strike	Attacks multiple enemies, hitting for moderate damage
Queens Waltz	Swaps positions with another unit
Unification	Merges all Queens into one unit

The Veil of Malice: Obscuring the Path to Victory

The Veil of Malice is a powerful card in the Final Fantasy VII Rebirth Queen’s Blood game that can have a devastating impact on the battlefield. It allows the user to steal an opponent’s card and add it to their own deck, giving them access to powerful abilities and synergies that they would not otherwise have. However, using the Veil of Malice comes with a significant cost, making it a double-edged sword that players must wield with caution.

The Seven Key Factors

1. Card Value: The value of the card being stolen is a crucial factor to consider. Stealing a high-value card can provide a significant advantage, but it also increases the risk of retaliation from the opponent.
2. Synergies: The synergies between the stolen card and the user’s deck are essential. If the stolen card does not fit well with the user’s playstyle or strategy, it may not be worth the cost of using the Veil of Malice.
3. Cost to Use: The Veil of Malice has a significant energy cost, which can restrict its use in certain situations. Players need to weigh the cost of using the card against the potential benefits it provides.
4. Opponent’s Deck: The composition of the opponent’s deck can influence the effectiveness of the Veil of Malice. Stealing a valuable card from an opponent who has few other options can be devastating, but it may not be as impactful against an opponent with a diverse deck.
5. Timing: The timing of using the Veil of Malice is crucial. Stealing a card too early or too late can reduce its effectiveness. Players should carefully consider the current game state and their opponent’s strategy before using the card.
6. Opponent’s Strategy: Understanding the opponent’s strategy can help players predict which cards they are likely using and prioritize stealing those cards.
7. Risk Assessment: The Veil of Malice is a powerful yet risky card. Players should thoroughly assess the potential rewards and risks involved before using it. Stealing the wrong card or using it at an inopportune time can have dire consequences.

Tides of Blood: Draining Foes to Strengthen Allies

The Queens Blood deck in Final Fantasy VII Rebirth excels in empowering allies by draining the life force of foes. Here’s an in-depth look at its strengths and strategies:

Deck Overview

The Queens Blood deck centers around the Tides of Blood mechanic, which allows you to drain HP from enemies to fuel powerful abilities. By strategically targeting and eliminating foes, you can amass an overwhelming advantage and control the battlefield.

Key Units

The deck features several key units that enable the Tides of Blood strategy:

Yuffie Kisaragi: A swift and agile attacker who excels at draining HP from enemies.
Vincent Valentine: A ranged DPS with abilities that deal significant damage based on the HP drained from enemies.
Sephiroth: A powerful unit with abilities that empower allies and weaken enemies based on the amount of HP drained.

Tides of Blood Abilities

The Queens Blood deck offers a range of Tides of Blood abilities that empower allies:

Tides of Blood I: Drains a small amount of HP from an enemy and heals the attacker.
Tides of Blood II: Drains a moderate amount of HP from a single enemy and grants the attacker increased stats.
Tides of Blood III: Drains a significant amount of HP from all enemies and deals damage to the attacker. However, this ability also greatly increases the attacker’s damage output.

Strategy

To maximize the effectiveness of the Queens Blood deck, focus on the following strategies:

Target High-HP Enemies: Prioritize draining HP from enemies with high health pools to maximize the benefits of Tides of Blood abilities.
Use Yuffie’s Abilities: Utilize Yuffie’s abilities to drain HP and empower allies, setting up for devastating attacks from Vincent and Sephiroth.
Control the Battlefield: Enhance your units’ survivability by using Sephiroth’s abilities to reduce enemy damage and grant allies regeneration effects.

Unit	Tides of Blood Ability
Yuffie Kisaragi	Tides of Blood I, Tides of Blood II
Vincent Valentine	Tides of Blood II, Tides of Blood III
Sephiroth	Tides of Blood I, Tides of Blood II (Empowered)

Blood Moon Ascension: Rituals of Dominance

In Final Fantasy VII Rebirth, the Queens Blood Best Deck revolves around the concept of summoning powerful monsters through rituals, known as Blood Moon Ascension.

Blood Moon Ascension: Rituals of Dominance

Rituals are crucial to summoning monsters and progressing in Rebirth. The Blood Moon Ascension mechanic utilizes the power of the moon’s phases to enhance summon rituals.

Lunar Phases and Rituals

The moon’s appearance affects the success rate and strength of rituals.

Lunar Phase	Ritual Success Rate	Summon Strength
New Moon	Low	Low
Waxing Moon	Medium	Medium
Full Moon	High	High
Waning Moon	Medium	Medium

Ritual Preparation

Successful rituals require the collection of specific materials and a deep understanding of the target summon’s characteristics. Proper preparation increases ritual success rate and reduces the risk of failure.

Summoning Mechanics

Summoning involves selecting an appropriate ritual, collecting necessary materials, and performing the ritual during an auspicious lunar phase. The summoning process is complex and requires mastery of the Blood Moon Ascension mechanic.

Ritual Mastery

With repeated use, players can enhance their ritual proficiency, increasing their success rate, reducing material requirements, and unlocking special summon abilities.

Strategic Considerations

Choosing the right summons for different situations is essential. Balancing the strengths and weaknesses of summons and adapting the ritual strategy to the battlefield is key to maximizing the Blood Moon Ascension power.

Summoner Classes

Certain classes in Rebirth specialize in Blood Moon Ascension rituals. Embracing these classes provides unique advantages and unlocks powerful summon abilities.

Rare Blood Moons

During rare Blood Moon events, the moon’s power is at its peak. Engaging in rituals during these events grants significant bonuses and unlocks exclusive summon abilities.

Final Thoughts

The Queens Blood Best Deck in Final Fantasy VII Rebirth empowers players with the ability to summon formidable monsters through Blood Moon Ascension rituals. Understanding the lunar phases, ritual preparation, and summoning mechanics is essential for mastering this powerful playstyle.

FF7 Rebirth: Queen’s Blood Best Deck

In the upcoming Final Fantasy VII Rebirth, players will encounter various adversaries and challenges, requiring a well-constructed deck to succeed. Among the available decks, the Queen’s Blood deck stands out as a formidable choice, combining offensive and defensive capabilities to maximize effectiveness.

At the heart of the Queen’s Blood deck lies the exclusive Monarch unit, a powerful ally with high stats and abilities. The Monarch possesses both offense and defense prowess, making it a versatile addition to any team. Furthermore, the deck includes cards that enhance the Monarch’s abilities, granting it additional strength, resilience, and strategic advantages.

The deck also offers a range of support units to complement the Monarch’s capabilities. These units provide various abilities, such as healing, buffing, and debuffing, ensuring the team’s overall stability and endurance. By strategically combining the Monarch’s strength with the support units’ abilities, players can optimize their deck’s efficiency and adapt to various battles.

How To Get National Dex In Platinum

People Also Ask about How To Get National Dex In Platinum

How do I get the National Dex in Pokemon Platinum?

What are the benefits of having the National Dex?

Is it possible to get the National Dex without trading?

Unlocking the Forbidden Curse

Unrestricted Access with Cheats

Modding Your Way to Avada Kedavra

Detailed Explanation of Step 4: Unlocking Avada Kedavra

Glitching into Forbidden Power

1. Secure a Broomstick

2. Find the Cliff Edge

3. Approach the Abyss

4. Fall into the Void

5. Respawn and Loot

Unlocking Hidden Spells

Hidden Spells and Intriguing Quests

The Shadow of Avada Kedavra

A Table of Secrets

The Shadow of Death Revealed

Confronting the Dark Lord

How To Get Avada Kedavra Hogwarts Legacy Early

People Also Ask

How do I unlock Avada Kedavra in Hogwarts Legacy?

What is the most powerful spell in Hogwarts Legacy?

How do I get the Killing Curse in Hogwarts Legacy?

When can I learn Avada Kedavra in Hogwarts Legacy?

How to Make a Large Chest in Minecraft

Crafting the Large Chest

Creating Wooden Planks

Acquiring a Trapped Chest

Assembling the Large Chest

Expanding the Large Chest

People Also Ask

How do I lock a large chest in Minecraft?

Can I put items in the trapped chest inside the large chest?

How many items can a large chest hold?

How to Make Best Friends in Infinite Craft

People Also Ask

How do I approach someone in Infinite Craft?

How do I know if someone wants to be friends with me?

What should I do if I don’t make any friends?

Using Soul Eater

Utilizing Night’s Edge

Farming Souls of Night

Crafting the Shadowflame Hex Doll

How To Get Souls Of Night Terraria

People Also Ask About How To Get Souls Of Night Terraria

Where can I find Souls of Night?

How do I increase the drop rate for Souls of Night?

What items can I craft with Souls of Night?

Selecting the Optimal Wall Location

Installing the Mounting Bracket

1. Determine the Mounting Location

2. Mark the Bracket Placement

3. Drill the Pilot Holes

Hanging the Microwave on the Wall

1. Choose the Right Location

2. Mark the Mounting Holes

3. Drill Pilot Holes

4. Insert Wall Anchors

5. Mount the Microwave Support

6. Lift the Microwave into Place

7. Secure the Microwave

Leveling and Aligning the Microwave

1. Mark the Hanging Points

2. Install the Mounting Bracket

3. Slide on the Microwave

4. Adjust the Height

5. Align the Top

6. Check for Stability

7. Secure the Screws

8. Adjust the Microwave’s Position (Optional)

How to Hang a Microwave on the Wall

People Also Ask

How much weight can a microwave mounting bracket hold?

Most microwave mounting brackets can hold up to 50 pounds. However, it’s important to check the weight limit of the specific bracket that you are using.

Can I hang a microwave over the stove?

No, you should not hang a microwave over the stove. The heat from the stove can damage the microwave and cause it to malfunction.

How do I know if my wall is strong enough to hold a microwave?

Common Mistakes to Avoid with Retainers

Here are some common mistakes to avoid when using retainers: