Tag: frigidaire

10 Steps on How to Remove a Frigidaire Water Filter

10 Steps on How to Remove a Frigidaire Water Filter
$title$

Your Frigidaire water filter is a crucial component, ensuring you access clean, healthy water. However, replacing it regularly is essential to maintain its effectiveness. If you’ve been putting off changing your filter, fret not; the process is straightforward and requires minimal effort. Contrary to popular belief, you won’t need any tools or professional assistance. In this guide, we’ll walk you through the simple steps to remove your Frigidaire water filter, ensuring you have a steady supply of fresh, filtered water.

Before embarking on this task, locate your refrigerator’s water filter housing. It’s typically found either behind the refrigerator’s grille or inside the refrigerator compartment. Once you’ve identified the housing, the first step is to shut off the water supply to your refrigerator. This is a crucial safety measure to prevent water from spilling during the filter replacement process. You’ll find the water shut-off valve behind the refrigerator, usually near the bottom. Simply turn the valve clockwise to close it. Next, locate the filter cap on the housing and turn it counterclockwise to loosen it. Once it’s loose enough, pull it straight out to detach it from the housing. With the cap removed, gently pull the old filter straight down to disengage it from the housing.

Once the old filter is out, it’s time to insert the new one. Before installing the new filter, apply a small amount of petroleum jelly to the O-rings on both ends of the filter. This will help create a tight seal and prevent leaks. Align the new filter with the housing and push it straight up until it fits snugly. Make sure it’s securely in place. Next, replace the filter cap and turn it clockwise to tighten it. The final step is to turn the water supply back on by turning the valve counterclockwise. Check for any leaks around the filter housing and cap. If everything seems fine, you’re all set! Your Frigidaire refrigerator is now equipped with a fresh water filter, ensuring you and your family have access to clean, refreshing water.

Removing the Water Filter Compartment

To remove the water filter compartment on your Frigidaire refrigerator, follow these steps:

Locate the Water Filter Compartment

The water filter compartment is typically located inside the refrigerator, on the upper right or left-hand side, near the top. Look for a small, rectangular or round compartment with a handle or a button.

Disengage the Handle or Button

If the compartment has a handle, simply pull it down to disengage the filter compartment. If it has a button, press the button while pulling down on the compartment to release it.

Pull Out the Compartment

Once the handle or button is disengaged, gently pull out the water filter compartment. It should slide out easily. Be careful not to spill any water that may have collected in the compartment.

Remove the Old Filter

Once the compartment is removed, you can remove the old water filter. To do this, simply twist the filter counterclockwise until it becomes loose. Pull the filter straight out of the compartment.

Insert the New Filter

Take the new water filter and insert it into the compartment. Make sure that the filter is properly aligned and that the arrow on the filter is pointing towards the bottom of the compartment.

Twist the Filter into Place

Twist the filter clockwise until it is snug. Do not overtighten the filter.

Reinsert the Compartment

Gently slide the water filter compartment back into the refrigerator, making sure that it is properly seated.

Reset the Filter Indicator Light (if applicable)

Some Frigidaire refrigerators have a filter indicator light that will come on when the filter needs to be replaced. If your refrigerator has this light, you will need to reset it after replacing the filter.

To reset the filter indicator light, press and hold the “Filter Reset” button for 5 seconds. The light should turn off.

Locating the Water Filter

Depending on your Frigidaire refrigerator model, the water filter can be positioned in two primary locations: inside the refrigerator compartment or behind the grille at the bottom of the refrigerator.

Inside the Refrigerator Compartment:

1. Open the refrigerator door and locate the upper right-hand corner.
2. Find the removable air filter grille or cover and detach it by pressing the tabs or release button.
3. Behind the grille, you will find the water filter cartridge. It is typically held in place by a twist-and-lock mechanism.

Behind the Grille at the Bottom of the Refrigerator:

Model Type Location
Top Freezer Behind the bottom grille, accessed from the front of the refrigerator.
Bottom Freezer Behind the bottom grille, accessed from the rear of the refrigerator.
French Door Inside the refrigerator compartment, behind a removable panel in the top right corner.

4. Locate the grille at the bottom of the refrigerator, typically spanning the width of the appliance.
5. Carefully remove the grille by pressing on the release tabs or levers.
6. The water filter cartridge will be accessible behind the grille, typically connected to water lines.

Twisting the Filter Counterclockwise

Step 1: Locate the filter. The water filter is typically located in the lower right corner of the refrigerator. It is usually covered by a small plastic panel.

Step 2: Remove the panel. Use a flathead screwdriver or your fingernail to pry the panel off. The panel is usually held in place by two small tabs.

Step 3: Twist the filter. Once the panel is removed, you will see the water filter. Grip the filter and twist it counterclockwise. The filter will release from the refrigerator.

Tips:

Tip Details
Use a wrench. If you have difficulty twisting the filter by hand, you can use a wrench to help.
Turn off the water supply. It is a good idea to turn off the water supply before changing the filter. This will prevent water from leaking out when the filter is removed.
Replace the filter every 6 months. The water filter should be replaced every 6 months to ensure that your refrigerator is dispensing clean, fresh water.

Pulling the Filter Downward

Once you have cleared the path by removing the grille, you can proceed to pull the water filter downward. Grasp the filter firmly with one hand and gently pull it straight down. You may need to apply a bit of force as the filter may be slightly stuck in place due to mineral deposits or buildup. Avoid using excessive force, as you do not want to damage the filter or the refrigerator’s internal components.

As you pull the filter down, observe its movement. It should slide smoothly out of the housing. If you encounter any resistance or the filter seems to be stuck, stop pulling and check if there are any obstructions or debris that may be preventing its removal. Remove any obstructions and try pulling the filter down again.

If the filter still does not come out easily, you can try twisting it slightly back and forth while pulling it down. This can help loosen any mineral deposits or buildup that may be holding the filter in place. Be careful not to overtwist the filter, as you could damage it or the refrigerator’s internal components.

Installing the New Water Filter

Once you have removed the old filter, you can install the new one. To do this, simply insert the new filter into the housing and twist it clockwise until it is snug. Be sure not to overtighten the filter, as this can damage the housing.

Things you will need:

– New water filter
– Adjustable wrench or pliers

Instructions:

1. Turn off the water supply to the refrigerator.
2. Open the refrigerator door and locate the water filter housing.
3. Turn the filter housing counterclockwise to remove it.
4. Remove the old filter from the housing.
5. Insert the new filter into the housing and turn it clockwise until it is snug. Be sure not to overtighten the filter.
6. Turn on the water supply to the refrigerator and check for leaks.
7. Reset the filter indicator light by pressing and holding the “Filter Reset” button for 3 seconds.

After you have installed the new water filter, be sure to reset the filter indicator light. This will help you keep track of when it is time to replace the filter again.

Aligning the Filter with the Compartment

  1. Locate the water filter compartment on your Frigidaire refrigerator. It’s usually found on the top or bottom of the fridge.
  2. Open the compartment by pressing the release button or latch.
  3. Remove the old water filter by turning it counterclockwise and pulling it straight out.
  4. Align the new water filter with the slots in the compartment. The filter should fit snugly into place.
  5. Push the filter all the way into the compartment until it clicks into place.
  6. **Reset the water filter indicator light:** Press and hold the “Filter” button for 3 seconds, or follow the instructions on your refrigerator’s display panel. The light will turn off to indicate that the filter is active.

Tips:

Tip Description
Lubricate the O-rings Apply a small amount of food-grade lubricant to the O-rings on the new filter to ensure a proper seal.
Check for leaks After replacing the filter, run water through the dispenser and check for any leaks around the compartment.
Replace the filter regularly It’s recommended to replace your Frigidaire water filter every 6 months or as indicated by the filter indicator light.

Twisting the Filter Clockwise

If your Frigidaire refrigerator’s water filter is located in the top grille, you’ll need to twist it clockwise to remove it.

To do this:

1. Unplug the refrigerator.
2. Locate the water filter housing in the top grille of the refrigerator.
3. Grip the filter housing and twist it counterclockwise to loosen it.
4. Pull the filter housing down to remove it from the refrigerator.
5. Twist the water filter clockwise to loosen it from the filter housing.
6. Pull the water filter out of the filter housing.

Here is a table summarizing the steps for removing a Frigidaire water filter by twisting it clockwise:

Step Description
1 Unplug the refrigerator.
2 Locate the water filter housing in the top grille of the refrigerator.
3 Grip the filter housing and twist it counterclockwise to loosen it.
4 Pull the filter housing down to remove it from the refrigerator.
5 Twist the water filter clockwise to loosen it from the filter housing.
6 Pull the water filter out of the filter housing.

Resetting the Filter Indicator Light

If you have replaced the water filter and the filter indicator light is still on, you will need to reset the filter indicator light. To reset the filter indicator light:

  1. Press and hold the Water Filter button for 5 seconds.

  2. The filter indicator light will flash rapidly for a few seconds and then turn off.

  3. The filter indicator light will now be reset and will turn on again when it is time to replace the water filter.

NOTE: If the filter indicator light does not turn off after following the above steps, there may be a problem with the water filter or the refrigerator. In this case, you will need to contact a qualified appliance repair technician.

Here is a table summarizing the steps to reset the filter indicator light:

Step Instructions
1 Press and hold the Water Filter button for 5 seconds.
2 The filter indicator light will flash rapidly for a few seconds and then turn off.
3 The filter indicator light will now be reset and will turn on again when it is time to replace the water filter.

Troubleshooting Common Issues

Filter Won’t Twist Off

If the filter is stuck and won’t twist off, try one of the following methods:

  • Use a pair of pliers or a strap wrench to get a better grip on the filter.
  • If the filter is still stuck, try soaking it in vinegar for a few hours to loosen any mineral buildup.
  • Use a butter knife or other flat object to gently pry the filter loose.

Water Leaking From Filter Head

If water is leaking from the filter head, it is likely due to one of the following issues:

Possible Cause Solution
The O-ring on the filter is not seated properly. Remove the filter and reinsert it, making sure that the O-ring is seated correctly.
The filter head is cracked or damaged. Replace the filter head.
The water line is not connected properly. Disconnect the water line and reconnect it, making sure that it is tight.

Maintaining Your Frigidaire Water Filter

1. Locate the water filter

The water filter is typically located in the bottom of the refrigerator, behind the bottom grille. Look for a blue cap or knob.

2. Turn off the water supply

Locate the water supply valve, which is usually located behind the refrigerator. Turn the valve clockwise to shut off the water.

3. Remove the old filter

Grasp the water filter and turn it counterclockwise to remove it. Some filters may have a release button that needs to be pressed first.

4. Lubricate the O-rings

Apply a small amount of food-grade lubricant to the O-rings on the new filter. This will help to prevent leaks.

5. Insert the new filter

Align the new filter with the housing and push it into place. Turn it clockwise to tighten it.

6. Turn on the water supply

Turn the water supply valve counterclockwise to turn on the water. Check for leaks around the filter.

7. Reset the filter indicator

Some Frigidaire refrigerators have a filter indicator light. If the light is on, press and hold the filter reset button for 5 seconds to reset it.

8. Run water through the filter

Run water through the dispenser for a few minutes to flush out any air or debris.

9. Check the water quality

Taste the water from the dispenser to make sure it is clean and free of any impurities.

10. Replace the filter regularly

Frigidaire water filters should be replaced every 6 months or 300 gallons of use. The actual lifespan of a filter will vary depending on the quality of your water. To keep your water tasting its best and flowing freely, it’s important to change the filter regularly.

Refrigerator Model Filter Type
Frigidaire FRS26H5ASB PureSource Ultra II
Frigidaire FGHC2331PF UFL-GB1000

How to Remove Frigidaire Water Filter

Frigidaire water filters are designed to remove impurities and improve the taste and smell of your water. Over time, water filters can become clogged with sediment and other contaminants which can reduce their effectiveness. It’s important to replace your Frigidaire water filter every 6 months to ensure that you’re drinking clean, healthy water.

To remove the water filter, follow these simple steps:

  1. Turn off the water supply to the refrigerator. This is usually done by turning the water valve behind the refrigerator to the “off” position.
  2. Find the water filter housing. The water filter housing is typically located on the back or side of the refrigerator. It will be a plastic housing with a blue cap.
  3. Twist the filter housing cap to unlock it. Be sure to hold onto the housing with your other hand so that it doesn’t fall off.
  4. Pull the old water filter straight out of the housing. Discard the old filter.
  5. Insert the new water filter into the housing. Make sure that the filter is aligned properly and that the o-rings are in place.
  6. Twist the filter housing cap to lock it into place. Turn the water supply back on and check for leaks.

People Also Ask About How to Remove Frigidaire Water Filter

Where is the water filter located on a Frigidaire refrigerator?

The water filter is typically located on the back or side of the refrigerator. It will be a plastic housing with a blue cap.

How often should I change my Frigidaire water filter?

Frigidaire recommends changing the water filter every 6 months.

What happens if I don’t change my Frigidaire water filter?

If you don’t change your Frigidaire water filter, it can become clogged with sediment and other contaminants. This can reduce the effectiveness of the filter and lead to decreased water quality.

Can I use a different brand of water filter in my Frigidaire refrigerator?

No, you should only use Frigidaire-branded water filters in your Frigidaire refrigerator.

5 Easy Ways to Fix Ice Maker in Frigidaire

10 Steps on How to Remove a Frigidaire Water Filter

Your Frigidaire ice maker should be constantly producing new ice to keep your drinks cold and refreshing. However, if you find yourself running low on ice or if the ice maker has stopped working altogether, there are a few things you can do to troubleshoot the problem and get it back up and running. First, check to make sure that the ice maker is turned on and that the water supply is connected. If both of these things are in order, then the problem may be with the ice maker itself.

There are a few common problems that can cause a Frigidaire ice maker to stop working. One possibility is that the water inlet valve is clogged. This valve is responsible for letting water into the ice maker, so if it is clogged, the ice maker will not be able to make ice. Another possibility is that the ice maker’s thermostat is malfunctioning. The thermostat is responsible for controlling the temperature of the ice maker, so if it is malfunctioning, the ice maker may not be able to freeze the water properly. Finally, the ice maker’s motor may have failed. The motor is responsible for turning the ice maker’s auger, which is what moves the ice out of the ice maker. If the motor has failed, the ice maker will not be able to produce any ice.

If you are unable to fix the ice maker yourself, you may need to call a qualified appliance repair technician. However, by following the troubleshooting tips above, you may be able to save yourself the cost of a service call. In the meantime, you can always use a portable ice maker to keep your drinks cold.

Diagnosing Electrical Problems

Electrical problems can be a more complex issue to troubleshoot. However, with some basic knowledge and tools, you may be able to diagnose and fix the problem yourself. Here are the steps on how to diagnose electrical problems with your Frigidaire ice maker:

Check the Power Supply

Make sure the ice maker is plugged into a working power outlet. You can check this by plugging in another appliance into the same outlet to see if it works. If the other appliance works, then the power outlet is not the problem. If the other appliance does not work, then the power outlet may be the issue and you should contact a qualified electrician to have it checked.

Check the Circuit Breaker

If the ice maker is plugged into a circuit breaker, check to see if the breaker has tripped. If the breaker has tripped, reset it by flipping the switch to the “off” position and then back to the “on” position. If the breaker trips again, there may be a short circuit in the ice maker or in the wiring. You should contact a qualified electrician to have the issue diagnosed and repaired.

Check the Wiring

Inspect the wiring of the ice maker for any loose connections or damage. If you find any loose connections, tighten them securely. If you find any damaged wires, you should replace them with new wires of the same gauge. If you are not comfortable working with electrical wiring, you should contact a qualified electrician to have the issue diagnosed and repaired.

Check the Electrical Components

The electrical components of the ice maker include the ice maker motor, the water inlet valve, and the thermostat. To check these components, you will need a multimeter. If you do not have a multimeter, you can purchase one at a hardware store or home improvement center. Here is how to check the electrical components of the ice maker using a multimeter:

  1. Unplug the ice maker from the power outlet.
  2. Set the multimeter to the ohms setting.
  3. Touch one probe of the multimeter to one terminal of the electrical component you are testing.
  4. Touch the other probe of the multimeter to the other terminal of the electrical component you are testing.
  5. The multimeter will display the resistance of the electrical component.
Electrical Component Resistance
Ice Maker Motor 0-10 ohms
Water Inlet Valve 10-20 ohms
Thermostat 0-10 ohms (when the thermostat is closed)

If the resistance of the electrical component is not within the specified range, the component is likely faulty and should be replaced.

Inspecting the Water Inlet Valve

The water inlet valve is responsible for supplying water to the ice maker. If the valve is not functioning properly, the ice maker will not be able to produce ice. There are a few things you can check to determine if the water inlet valve is the cause of your ice maker problems.

1. Check the water pressure

The water pressure to the ice maker should be between 20 and 80 psi. You can check the water pressure using a water pressure gauge. If the water pressure is too low, the ice maker will not be able to get enough water to produce ice. If the water pressure is too high, the water inlet valve may be damaged.

2. Check the water line

The water line to the ice maker should be free of kinks or leaks. If the water line is kinked or leaking, the ice maker will not be able to get enough water to produce ice. You can check the water line by turning off the water supply to the ice maker and then inspecting the line for any kinks or leaks.

3. Check the electrical connections

The water inlet valve is electrically connected to the ice maker. If the electrical connections are not secure, the ice maker will not be able to power the water inlet valve. You can check the electrical connections by unplugging the ice maker and then checking the wires for any loose connections. If you find any loose connections, you can tighten them using a screwdriver.

Possible Problem Solution
Water pressure is too low Increase the water pressure to the ice maker.
Water line is kinked or leaking Check the water line for any kinks or leaks and repair as necessary.
Electrical connections are not secure Tighten the electrical connections to the water inlet valve.

Replacing the Ice Maker Module

If the ice maker module is faulty, it can prevent the ice maker from producing ice. To replace it, follow these steps:

  1. Unplug the refrigerator. This is a safety precaution to prevent electrical shock.

  2. Remove the access panel. The access panel is usually located at the front of the refrigerator, behind the ice maker.

  3. Locate the ice maker module. The ice maker module is a small, rectangular device that is attached to the ice maker.

  4. Disconnect the wires from the ice maker module. Use a pair of needle-nose pliers to gently disconnect the wires from the ice maker module.

     <table>
     <thead><tr><th>Wire Color</th><th>Terminal</th></tr></thead>
     <tbody>
         <tr><td>White</td><td>Neutral</td></tr><tr><td>Black</td><td>Line</td></tr><tr><td>Red</td><td>Crankshaft</td></tr><tr><td>Green</td><td>Ground</td></tr>
     </tbody>
 </table>

  5. Remove the ice maker module. Once the wires are disconnected, you can remove the ice maker module by unscrewing the mounting screws.

  6. Install the new ice maker module. Install the new ice maker module by screwing it into place.

  7. Connect the wires to the new ice maker module. Connect the wires to the new ice maker module in the same way that they were connected to the old ice maker module.

  8. Reinstall the access panel. Reinstall the access panel and plug the refrigerator back in.

Cleaning and Resetting the Ice Maker

Cleaning the Ice Maker

Cleaning your ice maker regularly helps prevent clogs and promotes optimal performance. To clean it:

  1. Empty the ice bin and turn off the ice maker.
  2. Remove the ice maker by pushing up on the release button or lever.
  3. Fill a small bowl with warm water and a mild dish detergent.
  4. Dip a clean cloth or sponge into the solution and wipe down all surfaces of the ice maker, including the mold, fill tube, and ejector arm.
  5. Rinse the ice maker thoroughly with clean water and let it dry completely before reinstalling it.

Resetting the Ice Maker

Resetting the ice maker can sometimes resolve common issues:

  1. Disconnect the refrigerator from the power source for 5 minutes.
  2. Reconnect the refrigerator to the power source.
  3. Press the “Reset” or “Ice Maker” button, if available on your model.
  4. If your model has a door-mounted ice dispenser, locate the “Reset” button on the dispenser panel and press it.
  5. Note that some models do not have a dedicated reset button; in such cases, simply power-cycling the refrigerator as described in step 1 should suffice.

Troubleshooting Common Ice Maker Issues

If your ice maker is still not functioning properly after cleaning and resetting, consult the following table for common issues and solutions:

Issue Solution
Ice maker won’t produce ice
  • Check if the ice maker is turned on.
  • Ensure the freezer is cold enough (0°F or below).
  • Verify that the water supply to the refrigerator is adequate.
  • Clean the ice maker as described above.
  • Reset the ice maker.
Ice maker produces little ice
  • Check if the ice maker is turned on.
  • Ensure the freezer is cold enough (0°F or below).
  • Verify that the water supply to the refrigerator is adequate.
  • Clean the ice maker as described above.
  • Replace the water filter (if applicable).
Ice maker produces too much ice
  • Check if the ice maker is turned on.
  • Verify that the freezer is not too cold (below 0°F).
  • Clean the ice maker as described above.
  • Reset the ice maker.
Ice maker produces crescent-shaped ice
  • Clean the ice maker as described above.
  • Replace the water filter (if applicable).
  • Check if the refrigerator is level.
Ice maker produces hollow or clear ice
  • Clean the ice maker as described above.
  • Replace the water filter (if applicable).
  • Check if the refrigerator is level.

Checking for Refrigerant Leaks

Refrigerant leaks are a common cause of ice maker problems in Frigidaire refrigerators. To check for leaks, follow these steps:

Visually Inspect for Leaks

Look for any visible signs of refrigerant leaks, such as oil or bubbles on the refrigerant lines or condenser coils. If you see any leaks, contact a qualified technician for repair.

Use a Soap Solution

Mix a solution of soap and water in a spray bottle. Spray the solution onto the refrigerant lines and condenser coils. If there are any leaks, you will see bubbles forming at the leak site.

Use an Electronic Leak Detector

Electronic leak detectors are available for purchase at hardware stores. These detectors can be used to detect refrigerant leaks by sensing the presence of refrigerant gas. Follow the manufacturer’s instructions for using the leak detector.

Check the Refrigerant Pressure

Using a pressure gauge, check the refrigerant pressure in the system. The correct pressure will vary depending on the model of your refrigerator. Consult the owner’s manual for the correct pressure range.

Additional Troubleshooting Tips

Possible Cause Solution
Clogged refrigerant line Clear the line of any obstructions.
Faulty compressor Replace the compressor.
Damaged condenser coils Repair or replace the condenser coils.

Resetting the Refrigerator

If your ice maker is not working, one of the simplest things you can try is to reset the refrigerator. This will clear any error codes that may have been stored in the refrigerator’s memory and may resolve the issue with the ice maker. To reset the refrigerator, follow these steps:

1. Unplug the refrigerator from the power outlet.
2. Wait 5 minutes.
3. Plug the refrigerator back into the power outlet.
4. Press the “Ice Maker” button on the control panel.
5. The ice maker should now start working again.

If resetting the refrigerator does not resolve the issue with the ice maker, you may need to troubleshoot the ice maker itself. Here are some additional steps you can try:

Inspect the water line to the ice maker. Make sure that it is not kinked or blocked.
Check the water filter. If the water filter is clogged, it can restrict the flow of water to the ice maker.
Clean the ice maker. Ice makers can become clogged with ice and debris over time. To clean the ice maker, remove the ice maker from the refrigerator and clean it with warm water and a mild detergent.
Replace the ice maker. If the ice maker is not working properly, it may need to be replaced. You can replace the ice maker yourself or contact a qualified appliance repair technician to do it for you.

Here is a table summarizing the steps involved in resetting the refrigerator:

Step Action
1 Unplug the refrigerator from the power outlet.
2 Wait 5 minutes.
3 Plug the refrigerator back into the power outlet.
4 Press the “Ice Maker” button on the control panel.
5 The ice maker should now start working again.

How to Fix an Ice Maker in a Frigidaire

If your Frigidaire ice maker is not producing ice, there are a few things you can check to troubleshoot the problem. Here are the most common causes of ice maker problems and how to fix them:

  • Frozen water line. The water line that supplies water to the ice maker can freeze, especially in cold weather. This will prevent water from reaching the ice maker, and it will not be able to produce ice. To fix this, you can thaw the water line by pouring warm water over it. You can also try using a hair dryer to thaw the line.
  • Clogged water filter. The water filter in your refrigerator can become clogged over time, which will restrict the flow of water to the ice maker. This can cause the ice maker to produce less ice, or it may even stop producing ice altogether. To fix this, you can replace the water filter.
  • Faulty ice maker. If the water line and water filter are not the problem, then the ice maker itself may be faulty. You can test the ice maker by pressing the test button. If the ice maker does not produce ice, then it will need to be replaced.

People Also Ask

How do I reset my Frigidaire ice maker?

To reset your Frigidaire ice maker, you can follow these steps:

  1. Unplug the refrigerator from the power outlet.
  2. Wait 5 minutes.
  3. Plug the refrigerator back into the power outlet.
  4. Press the ice maker reset button. The reset button is usually located on the front of the ice maker.

Why is my Frigidaire ice maker making small cubes?

If your Frigidaire ice maker is making small cubes, it could be due to a problem with the water pressure. The water pressure should be between 40 and 60 psi. If the water pressure is too low, the ice cubes will be small. You can check the water pressure by using a water pressure gauge.