The Apple Remote is a sleek and compact device that allows you to control your Apple TV from across the room. However, even the most reliable devices require occasional maintenance, and replacing the battery in your Apple Remote is a simple task that can be completed in just a few minutes. By following these step-by-step instructions, you can ensure that your Apple Remote stays powered and ready to use.
To begin, you will need a new CR2032 coin battery. These batteries are widely available at most electronics stores and online retailers. Start by flipping the remote over and locate the small, circular battery compartment on the back. It will typically have a small notch or indentation that allows you to pry it open. Use a coin or a small flathead screwdriver to gently pry open the compartment, taking care not to damage the plastic. Once the compartment is open, remove the old battery and insert the new one positive side up. Ensure that the battery is seated correctly and close the compartment securely.
After replacing the battery, test the remote to ensure it is working properly. If the remote does not respond, try removing and re-inserting the battery. Additionally, you may need to pair the remote with your Apple TV again. To do this, simply hold the Menu and Volume Up buttons simultaneously for five seconds. The remote’s LED will blink rapidly, indicating that it is in pairing mode. Once the remote is paired, the LED will blink slowly. You can now enjoy using your Apple Remote with a fresh battery for many more hours of entertainment.
Essential Tools and Materials
To successfully change the battery in your Apple Remote, you will need the following essential tools and materials:
Required Tools
-
Small Phillips-head screwdriver: A small Phillips-head screwdriver, approximately 1.5 mm in width, is necessary to remove the screw securing the battery compartment.
-
Tweezers: Tweezers or a similar tool will be used to carefully remove the old battery from its compartment.
Replacement Battery
You will need a new CR2032 3-volt lithium coin battery to replace the old one. Ensure that the new battery matches the specifications of the original to ensure proper functionality and longevity.
Safety Precautions
Before you start, here are a few safety precautions to keep in mind:
1. Gather Your Tools
You will need a small screwdriver (preferably a Phillips head) and a new CR2032 coin battery.
2. Power Off the Remote
Slide the power switch on the back of the remote to the “Off” position.
3. Locate the Battery Compartment
The battery compartment is located on the bottom of the remote. You will see a small screw holding the compartment in place.
4. Remove the Screw
Use the screwdriver to remove the screw and set it aside.
5. Open the Battery Compartment
Gently pry open the battery compartment using your fingers or a plastic pry tool.
6. Remove the Old Battery
Use your fingers or a pair of tweezers to remove the old battery.
7. Insert the New Battery
Insert the new battery into the compartment with the positive (+) side facing up.
8. Close the Battery Compartment
Snap the battery compartment closed.
9. Tighten the Screw
Use the screwdriver to tighten the screw that holds the battery compartment in place.
10. Power On the Remote
Slide the power switch on the back of the remote to the “On” position. The remote should now be working properly.
How To Change Battery In Apple Remote
The Apple Remote is a small, handheld device that allows you to control your Apple TV or other Apple devices from a distance. It uses a small, coin-shaped battery to power its functions. When the battery dies, you will need to replace it in order to continue using the remote.
To change the battery in an Apple Remote, follow these steps:
1. Locate the battery compartment on the back of the remote. It is a small, round compartment with a slot for a coin.
2. Insert a coin into the slot and twist it counterclockwise to open the battery compartment.
3. Remove the old battery from the compartment.
4. Insert a new CR2025 battery into the compartment, positive side up.
5. Close the battery compartment by twisting the coin clockwise.
People Also Ask about How To Change Battery In Apple Remote
What type of battery does the Apple Remote use?
The Apple Remote uses a CR2025 battery.
How often do I need to change the battery in my Apple Remote?
The battery in an Apple Remote typically lasts for about a year. However, this may vary depending on how often you use the remote.
Can I use a different type of battery in my Apple Remote?
No, you should not use a different type of battery in your Apple Remote. Using a different type of battery may damage the remote.
