analog-watch Archives * flexco.com

5 Easy Steps to Change the Battery on a Timex Watch

Replacing the battery in your Timex watch is a simple task that can be completed in a few minutes with the right tools. Whether your watch is new or old, knowing how to change the battery will ensure it continues to keep accurate time. In this comprehensive guide, we will provide step-by-step instructions on how to change the battery on a Timex watch, including the necessary tools, safety precautions, and tips for a successful replacement.

Before you begin, gather the necessary tools: a small Phillips head screwdriver, a new watch battery (size 377), and a soft cloth. Ensure your work area is clean and well-lit to prevent any small parts from getting lost. To ensure safety, discharge any remaining power in the old battery by touching the positive and negative terminals with a metal object. This step is crucial to avoid short circuits and potential damage to the watch circuitry.

Now, let’s delve into the step-by-step process. First, turn the watch over and locate the small screws on the back casing. Using the screwdriver, carefully remove these screws and gently lift off the back casing. You will now see the battery, typically held in place by a small metal clip. Using a pair of tweezers or your fingers, gently pry the battery loose from the clip and remove it. Insert the new battery into the compartment, ensuring the positive (+) side faces upwards. Securely fasten the metal clip over the battery to hold it in place. Finally, replace the back casing, tighten the screws, and your Timex watch is ready to tell time once again.

Required Tools and Materials

To change the battery on a Timex watch, you’ll need the following tools and materials:

Tools

– A small Phillips head screwdriver
– A pair of needle-nose pliers
– A magnifying glass (optional)

Materials

– A new watch battery (type SR626SW or LR626)
– A small piece of cloth or tissue
– A watch repair kit (optional but recommended)

Choosing the Right Tools

It’s crucial to select the correct size and type of screwdriver for your watch model. Using an incorrect screwdriver can damage the watch’s screws. Additionally, a magnifying glass can be helpful for inspecting the watch’s components and ensuring proper alignment during reassembly.

Selecting a Suitable Battery

Before purchasing a new battery, ensure it matches the type specified in your watch’s manual. Using an incorrect battery type can lead to malfunctions or even damage the watch’s internal components. SR626SW or LR626 batteries are commonly used in Timex watches.

Preparing the Watch

Before you begin working on the watch, it’s essential to ensure your workspace is clean and well-lit. Cover the surface with a cloth or tissue to prevent scratches. Additionally, it’s recommended to discharge any residual electricity by shorting out the positive and negative terminals of the old battery with a pair of tweezers.

Removing the Back Cover

Before you begin, ensure you have the necessary tools: a small flathead screwdriver or a watchmaker’s knife. Additionally, spread a soft cloth or towel around the watch to prevent scratches during the process.

There are several methods for removing the back cover, depending on the specific model of your Timex watch:

Method 1: Snap-On Back

For snap-on back covers, simply use your fingernail or a thin, blunt object to carefully pry open the cover by inserting it into the notch. Twist gently until the cover pops off.

Method 2: Screw-On Back

For screw-on back covers, use a small flathead screwdriver or a watchmaker’s knife to gently pry open the notch on the side of the cover. Do not use excessive force, as you may damage the cover or the watch itself. Once the notch is opened, twist the cover counterclockwise to unscrew it.

Method 3: Pressure-Fit Back

Pressure-fit back covers are typically found on waterproof watches. To remove this type of cover, you will need a special watchmaker’s tool called a case wrench. Position the case wrench over the back cover and apply gentle pressure while rotating counterclockwise. Be careful not to overtighten, as you could damage the cover.

Disposing of the Old Battery Safely

Spent watch batteries contain hazardous materials and should never be disposed of in the trash. There are several ways to properly dispose of these batteries and keep toxic materials out of the environment:

Battery Recycling Programs

Many retailers and watch shops offer battery recycling programs. Bring your old battery to one of these locations for proper disposal. These programs recycle the battery materials and prevent them from ending up in landfills.

Hazardous Waste Drop-Offs

Local hazardous waste facilities accept spent watch batteries for disposal. Contact your local waste management authority for specific drop-off locations and hours. These facilities ensure that the batteries are handled and disposed of safely.

Mail-Back Programs

Some organizations provide mail-back programs for spent watch batteries. These programs typically involve collecting a specific number of batteries and sending them back to the organization using a pre-paid envelope. The organization then handles the proper disposal of the batteries.

Disposal Method	Requirements	Convenience	Cost
Battery Recycling Programs	Bring batteries to participating retailers or watch shops	Easy	Free or nominal fee
Hazardous Waste Drop-Offs	Locate and visit local hazardous waste facilities	Moderate	May vary, often free
Mail-Back Programs	Collect and mail batteries using pre-paid envelopes	Can be inconvenient	May have a fee

Inserting the New Battery

Once you have opened the watch case and removed the old battery, it is time to insert the new battery. Here are the steps to follow:

Orient the battery correctly. Most watch batteries are coin-shaped and have a positive (+) and negative (-) side. Make sure that the positive side of the battery is facing up towards the watch movement.
Insert the battery into the watch case. Gently press the battery into place, making sure that it fits snugly into the battery compartment. Do not force the battery or bend it excessively.
Secure the battery. Some watch cases have a small spring or clip that holds the battery in place. If your watch has one of these, make sure that it is properly secured before closing the case.
Test the battery. Once the battery is inserted, close the watch case and test if the watch is working properly. If the watch is not working, check the battery connections and make sure that the battery is oriented correctly.
**Double-check for water resistance.** If your watch is water-resistant, make sure that the gasket on the back of the case is properly seated before closing the case. This will help to prevent water from entering the watch and damaging the movement.

Reattaching the Back Cover

The final step in changing the battery on your Timex watch is to reattach the back cover. It is strongly advised to follow these detailed steps to avoid any damage or issues during the process:

1. Examine the Back Cover

Carefully inspect the back cover for any notches or alignment marks. Note these markings as they guide the proper orientation of the cover.

2. Lubricate the Gasket

If there is a rubber gasket or O-ring between the back cover and the watch case, apply a small amount of silicone grease or lubricant to the gasket. This helps create a watertight seal and prevents moisture intrusion. Avoid using excessive grease, as it can affect the seal’s effectiveness.

3. Align and Seat the Back Cover

Align the back cover according to the markings you noted earlier. Place it over the watch case and gently press it into place, ensuring that it fits snugly without resistance. Do not force the cover, as it may cause damage.

4. Secure the Screws

Most Timex watch back covers are secured with small screws. Using a suitable screwdriver, carefully tighten the screws around the cover. Avoid overtightening, which can strip the threads or damage the watch. Apply equal pressure to each screw to ensure uniform seating.

5. Water Resistance Check

If your watch is water-resistant, perform a water resistance test by submerging it in a glass of water for a few minutes. Observe if any water seeps into the watch. If there is water leakage, check for a damaged gasket or improper sealing. Allow the watch to dry thoroughly before further use.

Setting the Time and Date

Once the new battery is installed, you’ll need to set the time and date on your watch. Here’s how to do it:

Pull out the crown to the first position (one click).
Turn the crown to adjust the hour and minute hands.
Press the crown back in to the first position.
Pull out the crown to the second position (two clicks).
Turn the crown to adjust the date.
Press the crown back in to the second position.

Day of the Week (Optional)

If your watch has a day of the week display, you can set it by following these steps:

Pull out the crown to the third position (three clicks).
Turn the crown to adjust the day of the week.
Press the crown back in to the third position.

Additional Notes

Here are some additional tips for setting the time and date on your Timex watch:

If the watch has a 12-hour format, the hour hand will have two positions for each hour (one for AM and one for PM).
When setting the date, make sure to account for leap years if applicable.
Some Timex watches may have a “quick-set” feature that allows you to set the time and date more quickly. Refer to your watch’s instruction manual for more information.

Troubleshooting Common Issues

Watch Continues To Run After Battery Replacement

The battery contacts may be touching the watch case. Bend the battery contacts away from the watch case and try again.

The watch may be magnetized. Demagnetize the watch by holding a magnet near the watch for a few seconds. Remove the magnet and try again.

The watch may be dirty. Clean the watch with a soft cloth and try again.

Watch Not Running After Battery Replacement

The battery may be inserted incorrectly. Remove the battery and insert it again, making sure that the positive (+) side of the battery is facing up.

The battery may be dead. Replace the battery with a new one.

The watch may be damaged. Take the watch to a watch repair shop for service.

Watch Keeps Losing Time After Battery Replacement

The battery may be weak. Replace the battery with a new one.

The watch may be magnetized. Demagnetize the watch by holding a magnet near the watch for a few seconds, then remove the magnet.

The watch may be dirty. Clean the watch with a soft cloth.

Water Damage After Battery Replacement

The watch may not be water-resistant. Do not wear the watch in water.

The watch may have been damaged when the battery was replaced. Take the watch to a watch repair shop for service.

Other Issues

If you are having any other issues with your Timex watch, please contact Timex customer service.

Maintaining the Battery Life

Timex watches are known for their exceptional battery life, with some models lasting up to 5 years on a single battery. However, there are a few things you can do to help extend the battery life even further:

1. Avoid Exposing Your Watch to Extreme Temperatures

Extreme temperatures can damage the battery and shorten its lifespan. Avoid leaving your watch in direct sunlight for prolonged periods or exposing it to freezing temperatures.

2. Don’t Use the Backlight Excessively

The backlight is a power-hungry feature, so try to limit its use to when it’s absolutely necessary. If possible, use the ambient light feature instead, which allows you to see the time without using the backlight.

3. Turn Off the Watch When Not in Use

If you’re not going to be wearing your watch for an extended period, turn it off to conserve battery power. You can do this by pressing and holding the mode button for a few seconds.

4. Remove the Battery When Not in Use

If you’re going to be storing your watch for a long period, remove the battery to prevent it from draining. You can do this by opening the battery compartment and gently removing the battery.

5. Use a Compatible Battery

Always use a battery that is compatible with your Timex watch. Using an incompatible battery can damage the watch or shorten the battery life.

6. Change the Battery Regularly

Even with proper maintenance, all batteries eventually die. It’s important to change the battery regularly, according to the manufacturer’s recommendations. This will help keep your watch running smoothly and accurately.

7. Avoid Magnetic Fields

Magnetic fields can interfere with the watch’s movement and shorten the battery life. Avoid exposing your watch to strong magnetic fields, such as those found near magnets or power lines.

8. Other Tips for Extending Battery Life

Here are some additional tips for extending the battery life of your Timex watch:

Tip	Description
Use the power save mode.	This mode reduces the watch’s power consumption, extending the battery life.
Disable unnecessary features.	Features such as the alarm and hourly chime can drain the battery. Disable these features if you don’t need them.
Clean the battery contacts.	Dirty battery contacts can interfere with the battery’s connection, shortening its lifespan. Clean the contacts with a cotton swab dipped in rubbing alcohol.

Special Considerations for Different Timex Models

While the general steps above apply to most Timex watch models, there are some special considerations for certain models.

Timex TX6010E

This model features a snap-on case back that requires a special tool to open. You can purchase this tool online or at most watch repair shops.

Timex T5C831

This model has a screw-down case back that requires a screwdriver to open. Be careful not to overtighten the screws when closing the case back.

Timex T7901C2

This model has a water-resistant case that must be properly sealed after replacing the battery. You can purchase a water-resistant sealant at most watch repair shops.

Timex T46821

This model has a low-energy Bluetooth feature that must be re-enabled after replacing the battery. To do this, follow the instructions in the watch’s manual.

Timex T47341

This model has a digital display that may reset after replacing the battery. You can reset the display by following the instructions in the watch’s manual.

Timex T72401

This model has a solar-powered battery that does not need to be replaced. However, the watch may need to be charged if it is not getting enough sunlight.

Timex T2H301

This model has a hybrid analog/digital display that may need to be recalibrated after replacing the battery. To do this, follow the instructions in the watch’s manual.

Timex T49611

This model has a GPS feature that may need to be re-synced after replacing the battery. To do this, follow the instructions in the watch’s manual.

Timex T2M251

This model has a chronograph feature that may need to be reset after replacing the battery. To do this, follow the instructions in the watch’s manual.

Professional Timex Battery Replacement Services

If you need professional assistance, here are some options:

Authorized Timex Repair Center: Locate an authorized repair center near you using Timex’s website.
Jewelry Store: Many jewelry stores offer watch battery replacement services, including for Timex watches.
Watch Repair Shop: Local watch repair shops typically specialize in fixing and replacing watch batteries.

10. Troubleshooting

Issue	Possible Causes	Solutions
Watch not working after battery replacement	– Incorrect battery installed – Loose battery connections – Damaged watch movement	– Check the battery type and polarity – Securely connect the battery – Consult a professional for watch movement repairs
Watch losing time or running erratically	– Weak or depleted battery – Dirty or corroded battery contacts – Damaged timekeeping mechanism	– Replace the battery – Clean the battery contacts – Consult a professional for timekeeping repairs

How to Change the Battery on a Timex Watch

Changing the battery on a Timex watch is a relatively simple process that can be completed in a few minutes. Here are the steps on how to do it:

Gather the necessary tools. You will need a small Phillips head screwdriver and a new battery that is the correct size for your watch.
Open the back of the watch. Locate the small screws on the back of the watch and remove them with the screwdriver.
Remove the old battery. Once the back of the watch is open, you will see the old battery. Carefully remove it using a pair of tweezers or your fingers.
Insert the new battery. Align the new battery in the correct position and insert it into the watch. Make sure that the positive terminal of the battery is facing up.
Close the back of the watch. Replace the screws that you removed earlier and tighten them until the back of the watch is secure.
Test the watch. Once the battery is replaced, test the watch to make sure that it is working properly.

3 Easy Steps to Set the Time on an Armitron Watch

Navigating the intricate world of timekeeping can be a daunting task, especially when confronted with the complexities of an Armitron watch. However, unlocking the secrets of setting the time on this enigmatic timepiece is not as treacherous as it may initially appear. With a few deft maneuvers and a keen understanding of its inner workings, you can conquer the challenge and emerge victorious, your watch ticking in perfect harmony with the relentless march of time.

Before embarking on this horological adventure, it is imperative to gather the necessary tools. While some Armitron models may require a specialized tool known as a “pin pusher,” others can be adjusted with the simple use of your fingernails. With your tools at hand, you are now ready to embark on the time-setting odyssey.

The first step is to locate the crown, the small knob that protrudes from the side of the watch. Gently pull the crown out to the first position. In this position, you will be able to adjust the date by rotating the crown clockwise or counterclockwise. Once the correct date is displayed, gently push the crown back to the first position.

Accessing the Time-Setting Mode

The time-setting mode on Armitron watches is typically accessed by pressing a specific button or combination of buttons. Here’s a detailed step-by-step guide:

Locate the Time-Setting Button

Armitron watches usually have a dedicated button labeled “Time” or “Set” for time adjustment. This button is often found on the side of the watch, near the crown or other buttons.
Press and Hold the Time-Setting Button

Once you’ve identified the time-setting button, press and hold it for a few seconds (usually 3-5 seconds) until the watch enters the time-setting mode. The second hand will typically start flashing or moving to indicate that you’re in the time-setting mode.
Release the Time-Setting Button

After the watch enters the time-setting mode, release the time-setting button. The watch will now display the current time. You can now use the other buttons on the watch (typically marked with arrows or +/-) to adjust the time and other settings.

Here’s a table summarizing the time-setting mode access process:

Step	Action
1	Locate the Time-Setting Button
2	Press and Hold the Time-Setting Button for 3-5 Seconds
3	Release the Time-Setting Button

Using the Buttons for Adjustment

Step 1: Locate the Adjustment Buttons

Typically, Armitron watches come with two or three adjustment buttons located on the side of the case. One button is usually labeled "Mode" or "Set," while the others may be labeled "Adjust" or "Up/Down."

Step 2: Press and Hold the "Set" Button

To enter the time adjustment mode, press and hold the "Set" button for a few seconds. The watch will display a flashing number, which represents the current hour.

Step 3: Adjust the Hour

Use the "Up" or "Down" buttons to adjust the hour. Press the button corresponding to the direction you want to change the time. Hold down the button for continuous adjustment.

Step 4: Press the "Set" Button to Confirm Hour

Once you have set the desired hour, press the "Set" button to confirm your selection. The hour will stop flashing and the watch will display the current minute.

Step 5: Adjust the Minute

Follow the same steps as for adjusting the hour to set the minute. Press the "Up" or "Down" buttons to change the minute. Press the "Set" button to confirm your selection.

Step 6: Adjust the Second (Optional)

Some Armitron watch models also allow you to adjust the second. After setting the minute, press the "Set" button again. The second will start flashing. Use the "Up" or "Down" buttons to adjust the second. Press the "Set" button to confirm your selection.

Step 7: Exit Adjustment Mode

Press and hold the "Set" button again for a few seconds to exit the time adjustment mode. The watch will revert to normal display time.

Understanding the Hour Hand Movement

Step 1: Locate the Crown

On the side of the watch, you’ll find a small knob or wheel known as the crown. This is the primary way to adjust the time on your Armitron watch.

Step 2: Pull the Crown Out (First Position)

Gently pull out the crown to the first position. In this position, the second hand will stop moving, allowing you to set the time accurately.

Step 3: Turn the Crown to Adjust the Hour Hand

Turn the crown clockwise or counterclockwise to move the hour hand. One full turn will move the hand forward or backward by 12 hours. While adjusting the hour hand, pay attention to the 24-hour markings on the dial to ensure you set the correct time (AM/PM).

Step 4: Fine-Tune the Hour Hand Position

To fine-tune the position of the hour hand, gently push the crown in and out of the first position. Each time you push the crown in, the hour hand will move forward by one minute. This allows you to adjust the hand to the exact minute you desire.

Crown Position	Function
First Position	Set hour hand (while second hand is stopped)
Second Position	Set minute hand (while second hand continues to move)
Third Position	Set day of the week
Fourth Position	Set date

Sequencing the Minutes and Seconds

This step is crucial for setting the correct time on your Armitron watch. Here’s how to sequence the minutes and seconds:

Step 5: Adjust the Minutes and Seconds

Using the same push buttons from the previous step, now focus on adjusting the minutes and seconds. Here’s a detailed breakdown:

Action	Button	Effect
Advance minutes forward	Mode button (press repeatedly)	Moves the minute hand clockwise one minute at a time
Advance minutes backward	Start/Stop button (press and hold)	Moves the minute hand counterclockwise one minute at a time
Advance seconds forward	Reset button	Moves the second hand clockwise one second at a time
Reset seconds to zero	Start/Stop button + Reset button	Instantly sets the second hand to zero

Note: The rate at which the hands move depends on how long you press and hold the buttons. Press and hold for a shorter duration for slower movement or for a longer duration for faster movement.

Confirming the Time

Step 6: Verifying the Time:

Once you’re satisfied with the time setting, it’s crucial to double-check its accuracy before exiting the time-setting mode. To do so, simultaneously press the “Mode” and “Set” buttons again. This action will take you back to the normal time display mode, where you can observe if the time you configured corresponds to the current time. If it does, you’ve successfully set the time on your Armitron watch and can proceed to use it confidently.

In case the displayed time doesn’t match the current time, you can repeat steps 4 and 5 to make further adjustments until the time is accurately set. Additionally, to ensure the highest precision, consider setting the time by referring to a reliable time source, such as an atomic clock or a smartphone with an accurate time display.

Troubleshooting Tips

Possible Causes & Solutions

Time setting is not saving

Check if you’re holding down the “Set” button for 3 seconds during step 5. Ensure you’re pressing it firmly enough to activate the time-setting mode.

Buttons are unresponsive

Replace the battery with a new one. Clean any accumulated dirt or debris from the buttons using a soft brush or cotton swab.

Setting the Digital Time Display

To set the time on your Armitron watch, follow these steps:

Press the “Mode” button until you see the time display.
Press the “Adjust” button to enter time setting mode.
1. Press the “Up” or “Down” button to adjust the hour.
2. Press the “Mode” button to move to the minutes.
3. Press the “Up” or “Down” button to adjust the minutes.
4. Press the “Mode” button to move to the seconds.
5. Press the “Up” or “Down” button to adjust the seconds.
6. Press the “Adjust” button to exit time setting mode.

Setting the AM/PM Indicator

If your watch has an AM/PM indicator, you must also set the correct indicator. The following table shows how to set the AM/PM indicator:

AM	PM
Press the “Up” or “Down” button to highlight AM.	Press the “Up” or “Down” button to highlight PM.
Press the “Mode” button to save the setting.	Press the “Mode” button to save the setting.

Aligning the Time with a Reference Source

Once you have found the correct time, it’s time to align it with your watch. Here are the detailed steps:

8. Align the Hour Hand with the Nearest Hour Marker

a. Identify the number closest to the hour hand. This will be the hour that the watch will be set to.

b. Pull the crown out to the second position (one click). This will stop the watch from running.

c. Turn the crown clockwise until the hour hand points directly at the chosen hour marker. Make sure to pay attention to the 12 and 24-hour format, if applicable.

d. Double-check that the hour hand is aligned correctly. If not, repeat steps b and c.

Crown Position	Function
Pushed in	Normal operation
Pulled out one click (second position)	Set time
Pulled out two clicks (third position)	Set date and day (if applicable)

How to Set the Time on an Armitron Watch

Turn the Crown Counterclockwise to Position 2

Locate the crown on the side of the watch, usually at the 3 o’clock position. Pull it out one click, to position 2. This will put the watch into time-setting mode.

Rotate the Crown to Set the Hour

Turn the crown clockwise to move the hour hand forward. Rotate it counterclockwise to move it backward. Continue rotating until the correct hour is displayed.

Pull the Crown Out Fully to Set the Minute

Once the hour is set, pull the crown out further, to position 3. This will release the second hand and allow you to set the minutes.

Rotate the Crown to Set the Minute

Turn the crown clockwise to move the minute hand forward. Rotate it counterclockwise to move it backward. Continue rotating until the correct minute is displayed.

Push the Crown Back In to Position 1

Once the minute is set, push the crown back in one click, to position 1. This will lock the crown in place and save the time setting.

Troubleshooting Time-Setting Issues

Day/Date Not Changing

If the day or date is not changing, you may need to adjust the time by more than 24 hours. Try setting the time to noon and then rotating the crown 24 more hours to reach the correct time.

Second Hand Moving Fast or Slow

The second hand may move fast or slow if the battery is low. Replace the battery with a new one to ensure accurate timekeeping.

Time Resetting Randomly

If the time randomly resets, the watch may have a loose crown or a faulty capacitor. Contact a watch repair professional for assistance.

Maintaining the Time Accuracy

Maintaining accurate timekeeping is crucial for the reliability of Armitron watches. Several factors can affect the watch’s accuracy, including temperature fluctuations, external shocks, and magnetic fields. By following these tips, you can ensure that your Armitron watch continues to perform optimally:

10. Magnetic Field Resistance

Armitron watches are designed to resist magnetic fields up to a certain level. However, exposure to strong magnetic fields, such as those found near magnets, power lines, or MRI machines, can temporarily affect the watch’s accuracy. To minimize the impact of magnetic fields:

Avoid placing your watch near strong magnets or power lines.
If your watch has been exposed to a strong magnetic field, demagnetize it by placing it inside a demagnetizing coil or visiting a watch repair shop.

By following these tips, you can maintain the time accuracy of your Armitron watch and ensure its continued reliable performance.

How To Set The Time On A Armitron Watch

Setting the time on an Armitron watch is a simple process that can be completed in a few steps. First, locate the two buttons on the side of the watch. The top button is used to adjust the hours, and the bottom button is used to adjust the minutes. To set the hours, press and hold the top button until the hour hand moves to the correct time. Then, release the button and press it again to move the hour hand one hour forward. Repeat this process until the hour hand is set to the correct time.

To set the minutes, press and hold the bottom button until the minute hand moves to the correct time. Then, release the button and press it again to move the minute hand one minute forward. Repeat this process until the minute hand is set to the correct time.

Once the time is set, press and hold both buttons simultaneously for two seconds to save the changes. The watch will then display the correct time.

5 Simple Steps: Set Time on an Armitron Watch

Adjusting the time on your Armitron watch is a simple yet crucial task to ensure accurate timekeeping. Whether you’re setting the time for the first time or after a battery replacement, understanding the process will empower you to effortlessly keep your watch synchronized with the correct time zone. In this guide, we’ll delve into the step-by-step instructions for setting the time on your Armitron watch, ensuring you’re always on schedule and ready to seize the day.

Before embarking on the time-setting process, it’s essential to identify the type of crown your Armitron watch possesses. Most Armitron watches feature a single pull-out crown, while some models may have two or more. Once you’ve determined the type of crown, you can proceed with the following steps. For watches with a single pull-out crown, gently pull out the crown to the first position. This position allows you to adjust the day and date. To set the time, pull out the crown to the second position. You’ll notice that the second hand stops moving, indicating that the watch is now in time-setting mode.

Using the crown, rotate it clockwise or counterclockwise to adjust the hour and minute hands. If your watch has a rotating bezel, you can use it in conjunction with the hour hand to set the time accurately. Once the correct time is set, gently push the crown back into its original position. The second hand will resume moving, and your watch will now display the updated time. For watches with two or more crowns, refer to your watch’s user manual for specific instructions on setting the time.

Understanding Armitron Watch Timekeeping

Armitron watches are known for their accuracy and durability, and they feature a variety of timekeeping functions to meet the needs of different users. The most basic Armitron watches have an analog display with hour, minute, and second hands. More advanced models may have digital displays that show the time, date, and day of the week. Some Armitron watches also have chronograph functions, which allow the user to time events with accuracy. Additionally, many Armitron watches are water-resistant, making them suitable for use in a variety of environments.

Below is a table summarizing the different timekeeping functions available on Armitron watches:

Timekeeping Function	Description
Analog Display	Displays the time using hour, minute, and second hands.
Digital Display	Displays the time, date, and day of the week in a digital format.
Chronograph Function	Allows the user to time events with accuracy.
Water Resistance	Makes the watch suitable for use in a variety of environments, including water.

Step 7: Adjust the Day of the Week

Now that the time is set, you can adjust the day of the week. To do this, you will need to use the “Mode” button again.

Press the “Mode” button once to enter the “Time” mode.
Press the “Mode” button again to enter the “Day” mode.
Use the “+” and “-” buttons to adjust the day of the week.
Once the correct day of the week is displayed, press the “Mode” button to exit the “Day” mode.

Day of the Week	Number
Sunday	1
Monday	2
Tuesday	3
Wednesday	4
Thursday	5
Friday	6
Saturday	7

Now that the time and the day of the week are set, your Armitron watch is ready to use!

How to Set Time on an Armitron Watch

Setting the time on an Armitron watch is a simple process that can be done in a matter of minutes. Follow these steps to set the time on your watch:

Pull the crown out to the second position.
Turn the crown clockwise to move the hour hand forward.
Turn the crown counterclockwise to move the hour hand backward.
Once the hour hand is set, pull the crown out to the first position.
Turn the crown clockwise to move the minute hand forward.
Turn the crown counterclockwise to move the minute hand backward.
Once the minute hand is set, push the crown back into its original position.

Your watch is now set to the correct time.