5 Effortless Ways to Crop a Sweater

5 Effortless Ways to Crop a Sweater

Have you ever purchased a sweater that was the perfect fit in the store, only to find it was too long or boxy once you got it home? If so, you may have wondered if there was a way to crop it without ruining the garment. The good news is, cropping a sweater is a relatively simple process that can be done with a few basic tools, although there are a few things to keep in mind before you get started. First, it’s important to choose a sweater that is made from a fabric that will not fray easily. Secondly, you will need to decide how much you want to crop the sweater and where you want the new hem to fall. Once you have considered these factors, you can begin the cropping process.

To begin, lay the sweater flat on a table or other flat surface. Use a ruler or measuring tape to mark the desired length of the sweater. Once you have marked the new hemline, use a sharp pair of scissors to cut off the excess fabric then, fold up the raw edge of the fabric by 1/2 inch and press it with an iron. Fold the fabric up again by 1/2 inch and press it again to create a hem. Finally, topstitch the hem in place using a sewing machine or by hand.

Once you have finished cropping the sweater, you can try it on to make sure you are satisfied with the new length. If the sweater is still too long, you can repeat the cropping process until you are happy with the results. Cropping a sweater is a great way to give an old sweater a new look, or to simply make it fit better. So if you have a sweater that you’ve been thinking about getting rid of, try cropping it first. You may be surprised at how much you like the results.

$title$

Marking the Desired Crop Line

To mark the desired crop line, you will need:

  • A measuring tape or ruler
  • A piece of chalk or fabric marker
  • A pair of scissors

Once you have gathered your materials, follow these steps:

  1. Put on the sweater and stand in front of a mirror.
  2. Use the measuring tape or ruler to determine how much you want to crop off the bottom of the sweater.
  3. Mark the desired crop line with the chalk or fabric marker.
  4. Remove the sweater and lay it flat on a table.
  5. Use the scissors to cut along the marked crop line.
Tips
For a more precise crop, use a sewing machine to stitch along the marked crop line before cutting.
To prevent the edges of the cropped sweater from fraying, fold the edges under and stitch them in place.

With these steps, you can easily crop a sweater to achieve the desired length.

Using Scissors or Rotary Cutter to Crop the Sweater

The choice between using scissors or a rotary cutter depends on the size and thickness of your sweater. Scissors provide greater control for smaller or more intricate cuts, while a rotary cutter can make quicker work of large, straight cuts.

Using Scissors

1. Pin the sweater to a flat surface, smoothing out any wrinkles.
2. Mark the desired cropping lines using a measuring tape or tailor’s chalk.
3. Cut along the marked lines using sharp fabric scissors, being careful not to cut into any nearby fabric.

Using a Rotary Cutter

1. Place the sweater on a cutting mat and secure it with weights or clamps.
2. Use a ruler or measuring tape to mark the desired cropping lines on the sweater.
3. Position the rotary cutter along the marked line and cut through the fabric, applying moderate pressure.

Additional Tips for Using a Rotary Cutter

  • Use a sharp rotary blade for clean cuts.
  • Replace the blade regularly to maintain sharpness.
  • Cut slowly and carefully to avoid mistakes.
  • Practice on scrap fabric before cutting the actual sweater.
Tool Pros Cons
Scissors – Greater control for small or intricate cuts
– More precise than a rotary cutter
– Slower cutting process
– May require more skill to use
Rotary cutter – Faster cutting process
– More efficient for large, straight cuts
– Less control over the cut
– Requires a cutting mat to protect the surface

Finishing the Cropped Edges

Once you have cut the sweater to the desired cropped length, it’s time to finish the edges to prevent fraying and give the sweater a neat and polished look. Here are six detailed methods for finishing cropped edges:

1. Hemming:

Hemming involves folding the raw edge of the sweater up by about 1/2 inch and stitching it down to create a durable and concealed finish. Use a sewing machine or hand-stitch the hem for a professional-looking result.

2. Serging:

Serging uses a special sewing machine that trims, overcasts, and stitches the fabric edge simultaneously. This method creates a stretchy and clean finish that is commonly used on knitwear and garments with curved edges.

3. Binding:

Binding involves sewing a strip of bias tape or fabric along the raw edge of the sweater. The bias tape folds over the edge and is stitched in place, resulting in a decorative and reinforced finish that conceals the raw edge.

4. Top-stitching:

Top-stitching is a simple method that involves stitching along the raw edge of the sweater about 1/4 inch from the edge. This creates a visible and decorative finish that adds a touch of detail to the cropped edge.

5. Fray Check:

Fray Check is a liquid sealant that is applied to the raw edge of the sweater. When it dries, it forms a clear film that prevents the threads from unraveling and fraying. This method is easy to use and suitable for delicate fabrics that cannot be sewn.

6. Heat-sealing:

Heat-sealing is an advanced technique that uses a hot iron or a specialized heat-sealing machine to melt the fibers along the raw edge. This creates a fused and sealed finish that is extremely durable and resistant to fraying. It is commonly used in the production of athletic wear and garments with laser-cut edges.

| Method | Equipment | Finish | Uses |
|—|—|—|—|
| Hemming | Sewing machine or needle and thread | Durable, concealed | Straight edges |
| Serging | Serger | Stretchy, clean | Curved edges, knitwear |
| Binding | Bias tape or fabric | Decorative, reinforced | Any edge |
| Top-stitching | Sewing machine | Visible, decorative | Straight edges |
| Fray Check | Liquid sealant | Quick, easy | Delicate fabrics |
| Heat-sealing | Heat iron or machine | Durable, sealed | Laser-cut edges, athletic wear |

Styling the Cropped Sweater

The cropped sweater is a versatile piece that can be dressed up or down, depending on the occasion. Here are a few tips on how to style a cropped sweater:

With High-Waisted Bottoms

Cropped sweaters look great paired with high-waisted jeans, skirts, or pants. This will help to create a flattering silhouette that emphasizes your waistline.

With a Blazer or Jacket

For a more polished look, layer a cropped sweater under a blazer or jacket. This will help to add some warmth and coverage, while still showing off your midriff.

With a Skirt or Dress

Cropped sweaters can also be worn with skirts or dresses. For a more casual look, pair a cropped sweater with a denim skirt or a flowy dress. For a more formal look, pair a cropped sweater with a pencil skirt or a cocktail dress.

With Leggings or Tights

For a more casual and comfortable look, pair a cropped sweater with leggings or tights. This is a great option for running errands or lounging around the house.

With Shorts or Capris

Cropped sweaters can also be worn with shorts or capris. This is a great option for summer or warmer weather.

With Boots or Heels

Cropped sweaters can be dressed up or down with the right footwear. Pair a cropped sweater with boots for a more edgy look, or with heels for a more polished look.

How To Crop A Sweater

Cropping a sweater is a great way to give it a new look. It’s also a relatively easy DIY project that can be done in just a few hours. Here are the steps on how to crop a sweater:

  1. Put on the sweater and mark where you want to crop it. You can use a measuring tape or a piece of chalk to mark the desired length.
  2. Take off the sweater and lay it flat on a table. Smooth out any wrinkles.
  3. Use a sharp pair of scissors to cut along the marked line.
  4. If desired, you can hem the new edge of the sweater. To do this, fold the edge over by about 1/2 inch and press it with an iron. Then, fold the edge over again by about 1/4 inch and press it again. Stitch the hem in place by hand or machine.
  5. Try on the cropped sweater and make any necessary adjustments.

People Also Ask About How To Crop A Sweater

How much should I crop my sweater?

The amount you crop your sweater depends on your personal preference. However, a good rule of thumb is to crop it to about hip length. This will give you a cropped sweater that is still flattering and can be worn with a variety of outfits.

Can I crop any type of sweater?

Most sweaters can be cropped, but some fabrics are easier to work with than others. Sweaters made from knit fabrics, such as cotton or wool, are generally the easiest to crop. Sweaters made from woven fabrics, such as denim or corduroy, can be more difficult to crop because they tend to fray.

What if I make a mistake when cropping my sweater?

If you make a mistake when cropping your sweater, don’t panic. There are a few things you can do to fix it.

  • If you cut the sweater too short, you can add a band of fabric to the bottom. To do this, cut a piece of fabric that is the same width as the sweater and about 2 inches longer. Fold the fabric in half lengthwise and press it. Then, sew the fabric to the bottom of the sweater, right sides together. Fold the raw edge of the fabric under by 1/2 inch and press it. Then, topstitch the hem in place.
  • If you cut the sweater too wide, you can take in the sides. To do this, pin the sides of the sweater together, overlapping them by about 1 inch. Sew the sides together, using a serger or a zigzag stitch.

4 Foolproof Methods to Hem Sleeves

5 Effortless Ways to Crop a Sweater

Hemming sleeves is a simple task that can be completed in a few minutes with just a few basic supplies. However, it can be a little tricky to get the hem just right, especially if you’re new to sewing. In this article, we’ll provide step-by-step instructions on how to hem sleeves perfectly, even if you’re a beginner.

First, you’ll need to gather your supplies. You’ll need a needle, thread, scissors, and a measuring tape or ruler. You may also want to use a thimble to protect your fingers. Once you have your supplies, you’re ready to get started.

The first step is to measure the length of the sleeve. You’ll want to measure from the bottom of the sleeve to the point where you want the hem to be. Once you have the measurement, you can add about 1/2 inch to allow for the seam allowance. Now, you can fold up the bottom of the sleeve by 1/2 inch and press it with an iron. This will create a crease that will help you to sew a straight hem.

Measuring the Sleeve Length

Accurately determining the desired sleeve length is crucial for achieving a perfect hem. Follow these steps to ensure a precise measurement:

1. Stand Up Straight: Start by standing up straight with your arms relaxed at your sides.

2. Locate the Wrist Bone: On your inner wrist, identify the prominent bump where your wrist bone (ulna) ends. This is known as the “wrist crease”.

3. Measure from the Wrist Crease: Using a measuring tape or a ruler, measure the distance from the wrist crease to the desired sleeve length. If you want the sleeve to fall at a specific point on your hand, measure to that point.

4. Add a Hem Allowance: To ensure a clean and durable hem, add 1-2 inches (2.5-5 cm) to your measurement. This extra length will be used to create the hem.

5. Note the Measurement: Record the final measurement in a safe place where you can easily refer to it when hemming.

Tips:

Tip Description
Use a flexible measuring tape This will conform to the shape of your arm for a more accurate measurement.
Measure from the same wrist bone on both arms Even though your arms may be slightly different, it is best to start from the same point on both wrists.
Consider your body proportions The ideal sleeve length can vary depending on your height, shoulder width, and personal style.

Preparing the Sewing Tools and Fabric

Gathering the Necessary Materials

Before you begin, ensure you have all the essential materials for hemming your sleeves. These include:

Tool Purpose
Sewing machine Stitches the fabric together
Thread Holds the stitches in place
Iron and ironing board Presses the fabric flat and creates crisp folds
Measuring tape or ruler Determines the desired sleeve length
Fabric scissors Trims excess fabric
Pins Temporarily holds the fabric in place before sewing

Preparing the Fabric

Once you have gathered the necessary tools, prepare the fabric for hemming. This involves the following steps:

  1. Turn the sleeve inside out and smooth out any wrinkles or folds.
  2. Measure the desired sleeve length from the hem to the intended new length.
  3. Mark the measurement on the fabric using pins or chalk.
  4. Fold the fabric up along the marked line, bringing the raw edge towards the inside.
  5. Press the folded edge with an iron to create a crisp crease.

Folding the Hem

To fold the hem, start by measuring the desired length of the hem and marking it with a pin or a fabric marker. Fold the hem up by 1/4 inch, and then fold it up again by another 1/4 inch. Press the hem in place with an iron.

For a more durable hem, you can fold the hem up by 1/2 inch, and then fold it up again by another 1/2 inch. Press the hem in place with an iron.

If the fabric is thin, you can fold the hem up by 1/4 inch, and then fold it up again by another 1/4 inch. Press the hem in place with an iron.

Ironing the Hem

Once the hem is folded, it is important to iron it in place. This will help to set the hem and prevent it from coming undone.

To iron the hem, use a medium heat setting on your iron. Press the iron down on the hem for 10-15 seconds, or until the hem is set.

If the fabric is thin, use a low heat setting on your iron. Press the iron down on the hem for 5-10 seconds, or until the hem is set.

Pressing the Hem

Once the hem is ironed, it is important to press it to set the hem. This will help to keep the hem in place and prevent it from coming undone.

To press the hem, place a pressing cloth over the hem and press down on the iron for 10-15 seconds. Repeat this process until the hem is set.

If the fabric is thin, place a pressing cloth over the hem and press down on the iron for 5-10 seconds. Repeat this process until the hem is set.

Fabric Type Hem Width Iron Setting Pressing Time
Thin 1/4 inch Low 5-10 seconds
Medium 1/2 inch Medium 10-15 seconds
Thick 1 inch High 15-20 seconds

Pinning and Pressing the Hem

Once you have marked the hemline, it’s time to pin and press the hem. This will help to ensure that the hem is even and secure.

To pin the hem, start by folding the hem up to the marked line. Then, use pins to hold the hem in place, making sure that the pins are perpendicular to the hemline. Space the pins evenly about 1 inch apart.

Once the hem is pinned, it’s time to press it. This will help to set the crease and make it easier to sew the hem.

To press the hem, use a warm iron and a pressing cloth. Place the pressing cloth over the hem and press down on it with the iron. Hold the iron in place for a few seconds, then move it to the next section of the hem. Continue pressing the hem until it is completely set.

Measuring and Marking the Hem

  1. Measure the desired length of the sleeve from the shoulder seam to the desired hemline.
  2. Mark the hemline on the sleeve with a fabric pen or chalk.
  3. Measure the width of the hem you want to create and add 1/2 inch for seam allowance.
  4. Fold up the hem to the desired width and press it with an iron to create a crease.
  5. Fold up the hem again, aligning the raw edge with the crease, and press it again to set the fold.

Pinning the Hem

  1. Pin the hem in place, starting at the center of the sleeve and working towards the sides.
  2. Use straight pins, inserted perpendicular to the hemline, and space them about 1 inch apart.
  3. Ensure that the pins are not too close to the raw edge of the fabric, as this can cause the fabric to pucker.

Pressing the Hem

  1. Press the hem with a warm iron and a pressing cloth to set the pins and create a sharp crease.
  2. Hold the iron in place for a few seconds on each section of the hem to ensure it is properly set.
  3. Once the hem is pressed, remove the pins and proceed to sewing the hem in place.

Sewing the Hem by Hand

For a more professional finish, you can sew the hem by hand. This method is a bit more time-consuming, but it will give you a lasting and invisible hem.

  1. Fold up the hem twice. First, fold up the raw edge of the fabric by about 1/4 inch (6 mm). Then, fold it up again by another 1/4 inch (6 mm), enclosing the raw edge. Crease the hem firmly.
  2. Pin the hem in place. Use fine pins to secure the folded hem in place. Space the pins about 1 inch (2.5 cm) apart.
  3. Thread a needle with matching thread. Use a fine needle and thread that matches the color of the fabric. Double the thread and knot the ends together.
  4. Start sewing the hem. Begin sewing the hem at one end, using a small stitch. Insert the needle into the folded edge of the hem, just below the crease. Bring the needle up through the other side of the hem, about 1/16 inch (1.5 mm) away from the first stitch. Repeat this process all the way around the hem.
  5. Secure the thread. Once you have sewn the entire hem, tie off the thread securely. To do this, make a few small stitches in the same place and then cut the thread close to the fabric.

Materials:

  • Fabric
  • Matching thread
  • Needle
  • Scissors
  • Pins

Tools:

  • Iron and ironing board

Sewing the Hem by Machine

To sew the hem by machine, you will need a sewing machine, thread, and a needle. The type of thread and needle you use will depend on the fabric of your sleeves. Once you have gathered your supplies, read on to sew the hem by machine:

  1. Prepare the Sleeve: Fold the bottom edge of the sleeve up so that the wrong sides of the fabric are together. Press the fold to create a crease.
  2. Pin the Hem: Pin the hem in place, aligning the raw edge of the fabric with the crease. Pin the hem so that the stitches will be hidden when the sleeve is worn.
  3. Set the Sewing Machine: Set the sewing machine to the desired stitch length and width. For a hem, a straight stitch works well.
  4. Sew the Hem: Start sewing the hem, using a 1/4-inch seam allowance. Sew along the pinned edge of the fabric, keeping the stitch line straight.
  5. Finish the Hem: Once you have sewn the hem, press it to set the stitches. You can also top-stitch the hem to give it a more finished look.
  6. Types of Hemming Stitches

    Below are the types of hemming stitches that you can apply on your sleeves’ hem:

    Hemming Stitch Description
    Blind Hem Creates invisible stitches that are not visible from the right side of the fabric.
    Rolled Hem Folds the fabric edge under twice and stitches it down, creating a delicate and narrow hem.
    Double-Fold Hem Folds the fabric edge under twice and stitches it down, creating a sturdy and durable hem.

Finishing the Seams

Once the sleeves are hemmed, it’s time to finish the seams. There are several ways to do this, but the most common methods are serging, zigzag stitching, and using seam tape.

  1. Serging

  2. Serging is a quick and easy way to finish seams. It uses a special machine that trims the fabric as it sews, creating a clean and finished edge. Serging is less bulky than zigzag stitching, making it a good choice for lightweight fabrics.

  3. Zigzag Stitching

  4. Zigzag stitching is another common way to finish seams. It can be done on a regular sewing machine, and it creates a more durable edge than serging. However, zigzag stitching can be bulky, so it’s not the best option for lightweight fabrics.

  5. Using Seam Tape

  6. Seam tape is a thin, adhesive tape that can be applied to the seam allowance to finish it. It’s a quick and easy way to finish seams, but it can be less durable than serging or zigzag stitching.

  7. Table of Seam Finish Methods

  8. Method Pros Cons
    Serging Quick and easy, creates a clean edge Less durable than zigzag stitching, not suitable for lightweight fabrics
    Zigzag Stitching Durable, can be done on a regular sewing machine Can be bulky, not suitable for lightweight fabrics
    Seam Tape Quick and easy, no sewing required Less durable than serging or zigzag stitching
  9. Choosing the Right Seam Finish

  10. The best seam finish for your project will depend on the fabric and the desired look. For lightweight fabrics, serging is a good option. For heavier fabrics, zigzag stitching is more durable. Seam tape is a quick and easy option for projects where durability is not a concern.

Ironing and Pressing the Hem

Once the hem is sewn, it’s important to iron and press it properly to achieve a crisp and professional finish. Here’s a detailed guide to ironing and pressing the hem:

1. Use a Pressing Cloth

To protect the fabric from scorching, place a pressing cloth over the hem area before ironing. This cloth will act as a barrier between the hot iron and the delicate fabric.

2. Set the Iron to the Appropriate Temperature

Refer to the fabric care label to determine the appropriate temperature setting for ironing. Using too high a temperature can damage the fabric.

3. Press the Hem

Gently press the hem with the iron, moving in even strokes from the inside to the outside of the sleeve. Apply firm pressure to set the hem in place.

4. Flip the Sleeve

Turn the sleeve inside out and press the hem again from the inside. This will help to secure the hem and give it a clean finish.

5. Use a Sleeve Board

For sleeves with tight curves or narrow openings, use a sleeve board. This will provide a smooth surface for pressing and prevent the hem from becoming distorted.

6. Check for Puckering

After pressing, inspect the hem for any puckering or unevenness. If necessary, adjust the stitch length or tension and press again.

7. Roll the Hem

For a more polished look, roll the hem slightly towards the inside before pressing. This will create a subtle crease that adds elegance to the sleeve.

8. Ironing Techniques for Different Fabrics

Different fabrics require different ironing techniques to achieve the best results. Here’s a table outlining the recommended techniques for common fabrics:

Fabric Ironing Technique
Cotton Use a high heat setting and press with firm pressure.
Linen Use a medium heat setting and press with a light touch.
Silk Use a low heat setting and press gently through a damp pressing cloth.
Wool Use a low heat setting and press with a steam iron.

Checking the Hem Length

1. Put on the garment and stand in front of a mirror. The sleeves should hang naturally where you want them to after the hem is finished.

2. If you want to hem the sleeves to a specific length, measure from the shoulder seam to the desired length. Mark the length with a pin or chalk.

3. If you want to hem the sleeves to a specific style, such as a rolled hem or a cuff, follow the instructions for that type of hem.

4. Once you have determined the desired length and style of the hem, turn the garment inside out.

5. Fold the hem up to the desired length. Press the hem in place with an iron.

6. Pin the hem in place, making sure that the pins are perpendicular to the edge of the fabric.

7. Sew the hem in place, using a blind stitch or a topstitch.

8. Remove the pins and press the hem again. The sleeves are now hemmed!

9. Here is a table with some additional tips for hemming sleeves:

Tip Description
Use a sharp needle and thread This will help to prevent the fabric from puckering.
Sew the hem in small stitches This will help to keep the hem from coming undone.
Press the hem after sewing This will help to set the stitches and give the hem a professional finish.

Troubleshooting Hemming Issues

Machine Tension

If your stitches are too loose or uneven, check the tension of your sewing machine. Adjust the tension knob until the stitches are tight and consistent.

Uneven Hem

If your hem is uneven, measure the length of the hemmed area on both sides. If one side is longer than the other, shorten the longer side by folding it under a bit more.

Puckering

If your hem is puckering, you may have sewn it too tightly. Remove the stitches and sew the hem again, using a slightly wider stitch length.

Thread Breaking

If your thread keeps breaking, it may be too old or weak. Use a new spool of thread and make sure the tension is set correctly.

Needle Problems

If your needle is bent or dull, it will make it difficult to sew a neat hem. Replace the needle with a new one.

Wrong Presser Foot

Using the wrong presser foot can make it difficult to feed the fabric through the machine smoothly. Use a presser foot that is designed for hemming.

Fabric Slipping

If your fabric is slipping when you sew, use a walking foot or a Teflon presser foot to provide more traction.

Skipping Stitches

If your machine is skipping stitches, clean the bobbin area and rethread the machine. You may also need to adjust the tension.

Fabric Fraying

If your fabric is fraying, use a fabric stabilizer or a seam sealer to prevent it from unraveling.

Blind Hem Stitches Not Invisible

If your blind hem stitches are not invisible, check the stitch length and width. You may also need to adjust the tension or use a different type of needle.

Troubleshooting Solution
Loose or uneven stitches Adjust machine tension
Uneven hem Measure and shorten longer side
Puckering Sew with wider stitch length
Thread breaking Use new thread and adjust tension
Needle problems Replace with new needle
Wrong presser foot Use hemming presser foot
Fabric slipping Use walking foot or Teflon presser foot
Skipping stitches Clean bobbin area and rethread machine
Fabric fraying Use fabric stabilizer or seam sealer
Blind hem stitches not invisible Adjust stitch length, width, tension, or needle type

How To Hem Sleeves

A well-fitting sleeve can make all the difference in the overall look of your garment. If your sleeves are too long, they can make you look sloppy and unkempt. Conversely, if your sleeves are too short, they can make you look like you’re wearing a child’s shirt.

Hemming sleeves is a relatively simple task that can be done by hand or by machine. If you’re new to sewing, I recommend starting with a hand-stitched hem. Once you’ve mastered the basics, you can move on to machine-stitching.

Materials

  • Sleeves that need to be hemmed
  • Measuring tape or ruler
  • Fabric scissors
  • Needle and thread (for hand-stitching)
  • Sewing machine (for machine-stitching)
  • Iron and ironing board

Instructions

Hand-Stitching

  1. Measure the desired length of the sleeve.
  2. Fold the sleeve up to the desired length, and press the fold with an iron.
  3. Fold the sleeve up again, and press the fold again.
  4. Stitch the hem in place using a small, even stitch.

Machine-Stitching

  1. Measure the desired length of the sleeve.
  2. Fold the sleeve up to the desired length, and press the fold with an iron.
  3. Fold the sleeve up again, and press the fold again.
  4. Set your sewing machine to a small, even stitch.
  5. Stitch the hem in place, following the edge of the fold.

Tips

  • When hemming sleeves, it’s important to use a fabric that is similar in weight and texture to the fabric of the sleeve.
  • If you’re not sure how to hem a sleeve, ask a friend or family member for help.
  • Be patient and take your time. Hemming sleeves can be a time-consuming task, but it’s worth it in the end.

People Also Ask About How To Hem Sleeves

How can I hem sleeves without a sewing machine?

You can hem sleeves without a sewing machine by hand-stitching the hem in place. To do this, you will need a needle and thread, a measuring tape or ruler, and a pair of fabric scissors.

How do I hem sleeves on a shirt?

To hem sleeves on a shirt, you will need to measure the desired length of the sleeve, fold the sleeve up to the desired length, and press the fold with an iron. You can then either hand-stitch the hem in place or machine-stitch the hem in place.

How do I hem sleeves on a jacket?

To hem sleeves on a jacket, you will need to measure the desired length of the sleeve, fold the sleeve up to the desired length, and press the fold with an iron. You can then either hand-stitch the hem in place or machine-stitch the hem in place.