Replacing a cigarette lighter in a car is a simple and inexpensive task that can be completed in just a few minutes. However, it is important to follow the proper steps to ensure that the job is done safely and correctly. In this article, we will provide you with step-by-step instructions on how to replace a cigarette lighter in your car. We will also provide you with some tips on how to choose the right cigarette lighter for your vehicle.
Before you begin, you will need to gather a few tools. These include a Phillips head screwdriver, a flathead screwdriver, and a pair of pliers. You will also need a new cigarette lighter. Once you have all of your tools and materials, you can begin the replacement process.
The first step is to remove the old cigarette lighter. To do this, simply insert the flathead screwdriver into the slot on the side of the lighter and pry it out. Once the lighter is removed, you can disconnect the electrical connector. Next, you will need to remove the mounting bracket. To do this, use the Phillips head screwdriver to remove the screws that hold the bracket in place. Once the bracket is removed, you can discard the old cigarette lighter.
Wire the New Lighter
Once you have your new cigarette lighter in hand, it’s time to wire it up. This is a relatively simple process, but there are a few things you need to know before you get started.
1. Assess the Electrical System
Start by figuring out what type of electrical system your car has. There are two main types of electrical systems: positive ground and negative ground. To determine which type your car has, look at the battery terminals. If the positive terminal is connected to the chassis of the car, it is a positive ground system. If the negative terminal is connected to the chassis, it is a negative ground system.
Once you know the type of electrical system your car has, you can begin wiring the new lighter.
2. Disconnect the Battery
Safety first! Always disconnect the battery before performing any electrical work on your car. To disconnect the battery, simply remove the negative terminal from the battery post.
3. Locate the Fuse Box
The fuse box is where all the fuses for your car’s electrical system are located. It is typically found under the dashboard or in the engine compartment.
4. Identify the Cigarette Lighter Fuse
Once you have located the fuse box, you need to identify the fuse that powers the cigarette lighter. Consult your car’s owner’s manual to find the exact location of the fuse.
5. Connect the New Lighter
Now it’s time to connect the new lighter. The new lighter should come with a wiring harness that has two wires: a red wire and a black wire.
The red wire should be connected to the positive terminal of the fuse box. The black wire should be connected to the negative terminal of the fuse box.
Once the wires are connected, you can reconnect the battery and test the new lighter.
| Type of Electrical System | Wiring Instructions |
|---|---|
| Positive Ground | Connect the red wire to the positive terminal of the fuse box. Connect the black wire to the negative terminal of the fuse box. |
| Negative Ground | Connect the red wire to the positive terminal of the fuse box. Connect the black wire to the negative terminal of the fuse box. |
How To Replace Cigarette Lighter Car
A cigarette lighter is a small device that is used to light cigarettes. It is typically powered by a car’s electrical system and is located in the dashboard or center console. Over time, cigarette lighters can become damaged or worn out and need to be replaced. Replacing a cigarette lighter is a relatively simple process that can be completed in a few minutes.
To replace a cigarette lighter, you will need the following tools:
- A flathead screwdriver
- A Phillips head screwdriver
- A new cigarette lighter
Once you have gathered your tools, follow these steps to replace the cigarette lighter:
- Disconnect the negative terminal of the car’s battery.
- Locate the cigarette lighter. It is typically located in the dashboard or center console.
- Use the flathead screwdriver to pry off the trim ring around the cigarette lighter.
- Use the Phillips head screwdriver to remove the two screws that hold the cigarette lighter in place.
- Pull the cigarette lighter out of the dashboard.
- Disconnect the electrical connector from the back of the cigarette lighter.
- Connect the electrical connector to the back of the new cigarette lighter.
- Insert the new cigarette lighter into the dashboard.
- Tighten the two screws that hold the cigarette lighter in place.
- Replace the trim ring around the cigarette lighter.
- Reconnect the negative terminal of the car’s battery.
Once you have replaced the cigarette lighter, test it to make sure that it is working properly.
People Also Ask About How To Replace Cigarette Lighter Car
Do I need to disconnect the battery to replace the cigarette lighter?
Yes, it is recommended to disconnect the negative terminal of the car’s battery before replacing the cigarette lighter. This will help to prevent any electrical shocks.
How do I know if my cigarette lighter is blown?
There are a few signs that can indicate that your cigarette lighter is blown. These include:
- The cigarette lighter does not heat up when you press it.
- The cigarette lighter sparks when you press it.
- The cigarette lighter smells like burnt plastic.
How much does it cost to replace a cigarette lighter?
The cost to replace a cigarette lighter will vary depending on the make and model of your car. However, you can expect to pay between $20 and $50 for a new cigarette lighter.
Can I replace the cigarette lighter myself?
Yes, you can replace the cigarette lighter yourself. However, if you are not comfortable working on your car, it is best to have a mechanic replace the cigarette lighter for you.
